/* kbic.c (c) 1997-8 Grant R. Guenther Under the terms of the GNU General Public License. This is a low-level driver for the KBIC-951A and KBIC-971A parallel to IDE adapter chips from KingByte Information Systems. The chips are almost identical, however, the wakeup code required for the 971A interferes with the correct operation of the 951A, so this driver registers itself twice, once for each chip. */ /* Changes: 1.01 GRG 1998.05.06 init_proto, release_proto */ #define KBIC_VERSION "1.01" #include #include #include #include #include #include #include #include #define r12w() (delay_p,inw(pi->port+1)&0xffff) #define j44(a,b) ((((a>>4)&0x0f)|(b&0xf0))^0x88) #define j53(w) (((w>>3)&0x1f)|((w>>4)&0xe0)) /* cont = 0 - access the IDE register file cont = 1 - access the IDE command set */ static int cont_map[2] = { 0x80, 0x40 }; static int kbic_read_regr(struct pi_adapter *pi, int cont, int regr) { int a, b, s; s = cont_map[cont]; switch (pi->mode) { case 0: w0(regr|0x18|s); w2(4); w2(6); w2(4); w2(1); w0(8); a = r1(); w0(0x28); b = r1(); w2(4); return j44(a,b); case 1: w0(regr|0x38|s); w2(4); w2(6); w2(4); w2(5); w0(8); a = r12w(); w2(4); return j53(a); case 2: w0(regr|0x08|s); w2(4); w2(6); w2(4); w2(0xa5); w2(0xa1); a = r0(); w2(4); return a; case 3: case 4: case 5: w0(0x20|s); w2(4); w2(6); w2(4); w3(regr); a = r4(); b = r4(); w2(4); w2(0); w2(4); return a; } return -1; } static void kbic_write_regr(struct pi_adapter *pi, int cont, int regr, int val) { int s; s = cont_map[cont]; switch (pi->mode) { case 0: case 1: case 2: w0(regr|0x10|s); w2(4); w2(6); w2(4); w0(val); w2(5); w2(4); break; case 3: case 4: case 5: w0(0x20|s); w2(4); w2(6); w2(4); w3(regr); w4(val); w4(val); w2(4); w2(0); w2(4); break; } } static void k951_connect(struct pi_adapter *pi) { pi->saved_r0 = r0(); pi->saved_r2 = r2(); w2(4); } static void k951_disconnect(struct pi_adapter *pi) { w0(pi->saved_r0); w2(pi->saved_r2); } #define CCP(x) w2(0xc4);w0(0xaa);w0(0x55);w0(0);w0(0xff);w0(0x87);\ w0(0x78);w0(x);w2(0xc5);w2(0xc4);w0(0xff); static void k971_connect(struct pi_adapter *pi) { pi->saved_r0 = r0(); pi->saved_r2 = r2(); CCP(0x20); w2(4); } static void k971_disconnect(struct pi_adapter *pi) { CCP(0x30); w0(pi->saved_r0); w2(pi->saved_r2); } /* counts must be congruent to 0 MOD 4, but all known applications have this property. */ static void kbic_read_block(struct pi_adapter *pi, char *buf, int count) { int k, a, b; switch (pi->mode) { case 0: w0(0x98); w2(4); w2(6); w2(4); for (k=0;kmode) { case 0: case 1: case 2: w0(0x90); w2(4); w2(6); w2(4); for(k=0;kport); printk("mode %d (%s), delay %d\n",pi->mode, mode_string[pi->mode],pi->delay); } static void k951_log_adapter(struct pi_adapter *pi, char *scratch) { kbic_log_adapter(pi, scratch, "KBIC-951A"); } static void k971_log_adapter(struct pi_adapter *pi, char *scratch) { kbic_log_adapter(pi, scratch, "KBIC-971A"); } static struct pi_protocol k951 = { .owner = THIS_MODULE, .name = "k951", .max_mode = 6, .epp_first = 3, .default_delay = 1, .max_units = 1, .write_regr = kbic_write_regr, .read_regr = kbic_read_regr, .write_block = kbic_write_block, .read_block = kbic_read_block, .connect = k951_connect, .disconnect = k951_disconnect, .log_adapter = k951_log_adapter, }; static struct pi_protocol k971 = { .owner = THIS_MODULE, .name = "k971", .max_mode = 6, .epp_first = 3, .default_delay = 1, .max_units = 1, .write_regr = kbic_write_regr, .read_regr = kbic_read_regr, .write_block = kbic_write_block, .read_block = kbic_read_block, .connect = k971_connect, .disconnect = k971_disconnect, .log_adapter = k971_log_adapter, }; static int __init kbic_init(void) { int rv; rv = pata_parport_register_driver(&k951); if (rv < 0) return rv; rv = pata_parport_register_driver(&k971); if (rv < 0) pata_parport_unregister_driver(&k951); return rv; } static void __exit kbic_exit(void) { pata_parport_unregister_driver(&k951); pata_parport_unregister_driver(&k971); } MODULE_LICENSE("GPL"); module_init(kbic_init) module_exit(kbic_exit)