// SPDX-License-Identifier: GPL-2.0-or-later /* * processor_thermal.c - Passive cooling submodule of the ACPI processor driver * * Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com> * Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com> * Copyright (C) 2004 Dominik Brodowski <linux@brodo.de> * Copyright (C) 2004 Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> * - Added processor hotplug support */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> #include <linux/cpufreq.h> #include <linux/acpi.h> #include <acpi/processor.h> #include <linux/uaccess.h> #define PREFIX "ACPI: " #define ACPI_PROCESSOR_CLASS "processor" #define _COMPONENT ACPI_PROCESSOR_COMPONENT ACPI_MODULE_NAME("processor_thermal"); #ifdef CONFIG_CPU_FREQ /* If a passive cooling situation is detected, primarily CPUfreq is used, as it * offers (in most cases) voltage scaling in addition to frequency scaling, and * thus a cubic (instead of linear) reduction of energy. Also, we allow for * _any_ cpufreq driver and not only the acpi-cpufreq driver. */ #define CPUFREQ_THERMAL_MIN_STEP 0 #define CPUFREQ_THERMAL_MAX_STEP 3 static DEFINE_PER_CPU(unsigned int, cpufreq_thermal_reduction_pctg); #define reduction_pctg(cpu) \ per_cpu(cpufreq_thermal_reduction_pctg, phys_package_first_cpu(cpu)) /* * Emulate "per package data" using per cpu data (which should really be * provided elsewhere) * * Note we can lose a CPU on cpu hotunplug, in this case we forget the state * temporarily. Fortunately that's not a big issue here (I hope) */ static int phys_package_first_cpu(int cpu) { int i; int id = topology_physical_package_id(cpu); for_each_online_cpu(i) if (topology_physical_package_id(i) == id) return i; return 0; } static int cpu_has_cpufreq(unsigned int cpu) { struct cpufreq_policy policy; if (!acpi_processor_cpufreq_init || cpufreq_get_policy(&policy, cpu)) return 0; return 1; } static int cpufreq_get_max_state(unsigned int cpu) { if (!cpu_has_cpufreq(cpu)) return 0; return CPUFREQ_THERMAL_MAX_STEP; } static int cpufreq_get_cur_state(unsigned int cpu) { if (!cpu_has_cpufreq(cpu)) return 0; return reduction_pctg(cpu); } static int cpufreq_set_cur_state(unsigned int cpu, int state) { struct cpufreq_policy *policy; struct acpi_processor *pr; unsigned long max_freq; int i, ret; if (!cpu_has_cpufreq(cpu)) return 0; reduction_pctg(cpu) = state; /* * Update all the CPUs in the same package because they all * contribute to the temperature and often share the same * frequency. */ for_each_online_cpu(i) { if (topology_physical_package_id(i) != topology_physical_package_id(cpu)) continue; pr = per_cpu(processors, i); if (unlikely(!freq_qos_request_active(&pr->thermal_req))) continue; policy = cpufreq_cpu_get(i); if (!policy) return -EINVAL; max_freq = (policy->cpuinfo.max_freq * (100 - reduction_pctg(i) * 20)) / 100; cpufreq_cpu_put(policy); ret = freq_qos_update_request(&pr->thermal_req, max_freq); if (ret < 0) { pr_warn("Failed to update thermal freq constraint: CPU%d (%d)\n", pr->id, ret); } } return 0; } void acpi_thermal_cpufreq_init(struct cpufreq_policy *policy) { unsigned int cpu; for_each_cpu(cpu, policy->related_cpus) { struct acpi_processor *pr = per_cpu(processors, cpu); int ret; if (!pr) continue; ret = freq_qos_add_request(&policy->constraints, &pr->thermal_req, FREQ_QOS_MAX, INT_MAX); if (ret < 0) pr_err("Failed to add freq constraint for CPU%d (%d)\n", cpu, ret); } } void acpi_thermal_cpufreq_exit(struct cpufreq_policy *policy) { unsigned int cpu; for_each_cpu(cpu, policy->related_cpus) { struct acpi_processor *pr = per_cpu(processors, policy->cpu); if (pr) freq_qos_remove_request(&pr->thermal_req); } } #else /* ! CONFIG_CPU_FREQ */ static int cpufreq_get_max_state(unsigned int cpu) { return 0; } static int cpufreq_get_cur_state(unsigned int cpu) { return 0; } static int cpufreq_set_cur_state(unsigned int cpu, int state) { return 0; } #endif /* thermal cooling device callbacks */ static int acpi_processor_max_state(struct acpi_processor *pr) { int max_state = 0; /* * There exists four states according to * cpufreq_thermal_reduction_pctg. 0, 1, 2, 3 */ max_state += cpufreq_get_max_state(pr->id); if (pr->flags.throttling) max_state += (pr->throttling.state_count -1); return max_state; } static int processor_get_max_state(struct thermal_cooling_device *cdev, unsigned long *state) { struct acpi_device *device = cdev->devdata; struct acpi_processor *pr; if (!device) return -EINVAL; pr = acpi_driver_data(device); if (!pr) return -EINVAL; *state = acpi_processor_max_state(pr); return 0; } static int processor_get_cur_state(struct thermal_cooling_device *cdev, unsigned long *cur_state) { struct acpi_device *device = cdev->devdata; struct acpi_processor *pr; if (!device) return -EINVAL; pr = acpi_driver_data(device); if (!pr) return -EINVAL; *cur_state = cpufreq_get_cur_state(pr->id); if (pr->flags.throttling) *cur_state += pr->throttling.state; return 0; } static int processor_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state) { struct acpi_device *device = cdev->devdata; struct acpi_processor *pr; int result = 0; int max_pstate; if (!device) return -EINVAL; pr = acpi_driver_data(device); if (!pr) return -EINVAL; max_pstate = cpufreq_get_max_state(pr->id); if (state > acpi_processor_max_state(pr)) return -EINVAL; if (state <= max_pstate) { if (pr->flags.throttling && pr->throttling.state) result = acpi_processor_set_throttling(pr, 0, false); cpufreq_set_cur_state(pr->id, state); } else { cpufreq_set_cur_state(pr->id, max_pstate); result = acpi_processor_set_throttling(pr, state - max_pstate, false); } return result; } const struct thermal_cooling_device_ops processor_cooling_ops = { .get_max_state = processor_get_max_state, .get_cur_state = processor_get_cur_state, .set_cur_state = processor_set_cur_state, };