// SPDX-License-Identifier: GPL-2.0-only #include #include #include #include #include #include #include #include #include #include #include #include #include #include "mm_internal.h" #ifdef CONFIG_PARAVIRT # define STATIC_NOPV #else # define STATIC_NOPV static # define __flush_tlb_local native_flush_tlb_local # define __flush_tlb_global native_flush_tlb_global # define __flush_tlb_one_user(addr) native_flush_tlb_one_user(addr) # define __flush_tlb_others(msk, info) native_flush_tlb_others(msk, info) #endif /* * TLB flushing, formerly SMP-only * c/o Linus Torvalds. * * These mean you can really definitely utterly forget about * writing to user space from interrupts. (Its not allowed anyway). * * Optimizations Manfred Spraul * * More scalable flush, from Andi Kleen * * Implement flush IPI by CALL_FUNCTION_VECTOR, Alex Shi */ /* * Use bit 0 to mangle the TIF_SPEC_IB state into the mm pointer which is * stored in cpu_tlb_state.last_user_mm_ibpb. */ #define LAST_USER_MM_IBPB 0x1UL /* * The x86 feature is called PCID (Process Context IDentifier). It is similar * to what is traditionally called ASID on the RISC processors. * * We don't use the traditional ASID implementation, where each process/mm gets * its own ASID and flush/restart when we run out of ASID space. * * Instead we have a small per-cpu array of ASIDs and cache the last few mm's * that came by on this CPU, allowing cheaper switch_mm between processes on * this CPU. * * We end up with different spaces for different things. To avoid confusion we * use different names for each of them: * * ASID - [0, TLB_NR_DYN_ASIDS-1] * the canonical identifier for an mm * * kPCID - [1, TLB_NR_DYN_ASIDS] * the value we write into the PCID part of CR3; corresponds to the * ASID+1, because PCID 0 is special. * * uPCID - [2048 + 1, 2048 + TLB_NR_DYN_ASIDS] * for KPTI each mm has two address spaces and thus needs two * PCID values, but we can still do with a single ASID denomination * for each mm. Corresponds to kPCID + 2048. * */ /* There are 12 bits of space for ASIDS in CR3 */ #define CR3_HW_ASID_BITS 12 /* * When enabled, PAGE_TABLE_ISOLATION consumes a single bit for * user/kernel switches */ #ifdef CONFIG_PAGE_TABLE_ISOLATION # define PTI_CONSUMED_PCID_BITS 1 #else # define PTI_CONSUMED_PCID_BITS 0 #endif #define CR3_AVAIL_PCID_BITS (X86_CR3_PCID_BITS - PTI_CONSUMED_PCID_BITS) /* * ASIDs are zero-based: 0->MAX_AVAIL_ASID are valid. -1 below to account * for them being zero-based. Another -1 is because PCID 0 is reserved for * use by non-PCID-aware users. */ #define MAX_ASID_AVAILABLE ((1 << CR3_AVAIL_PCID_BITS) - 2) /* * Given @asid, compute kPCID */ static inline u16 kern_pcid(u16 asid) { VM_WARN_ON_ONCE(asid > MAX_ASID_AVAILABLE); #ifdef CONFIG_PAGE_TABLE_ISOLATION /* * Make sure that the dynamic ASID space does not conflict with the * bit we are using to switch between user and kernel ASIDs. */ BUILD_BUG_ON(TLB_NR_DYN_ASIDS >= (1 << X86_CR3_PTI_PCID_USER_BIT)); /* * The ASID being passed in here should have respected the * MAX_ASID_AVAILABLE and thus never have the switch bit set. */ VM_WARN_ON_ONCE(asid & (1 << X86_CR3_PTI_PCID_USER_BIT)); #endif /* * The dynamically-assigned ASIDs that get passed in are small * ( MAX_ASID_AVAILABLE); /* * Use boot_cpu_has() instead of this_cpu_has() as this function * might be called during early boot. This should work even after * boot because all CPU's the have same capabilities: */ VM_WARN_ON_ONCE(!boot_cpu_has(X86_FEATURE_PCID)); return __sme_pa(pgd) | kern_pcid(asid) | CR3_NOFLUSH; } /* * We get here when we do something requiring a TLB invalidation * but could not go invalidate all of the contexts. We do the * necessary invalidation by clearing out the 'ctx_id' which * forces a TLB flush when the context is loaded. */ static void clear_asid_other(void) { u16 asid; /* * This is only expected to be set if we have disabled * kernel _PAGE_GLOBAL pages. */ if (!static_cpu_has(X86_FEATURE_PTI)) { WARN_ON_ONCE(1); return; } for (asid = 0; asid < TLB_NR_DYN_ASIDS; asid++) { /* Do not need to flush the current asid */ if (asid == this_cpu_read(cpu_tlbstate.loaded_mm_asid)) continue; /* * Make sure the next time we go to switch to * this asid, we do a flush: */ this_cpu_write(cpu_tlbstate.ctxs[asid].ctx_id, 0); } this_cpu_write(cpu_tlbstate.invalidate_other, false); } atomic64_t last_mm_ctx_id = ATOMIC64_INIT(1); static void choose_new_asid(struct mm_struct *next, u64 next_tlb_gen, u16 *new_asid, bool *need_flush) { u16 asid; if (!static_cpu_has(X86_FEATURE_PCID)) { *new_asid = 0; *need_flush = true; return; } if (this_cpu_read(cpu_tlbstate.invalidate_other)) clear_asid_other(); for (asid = 0; asid < TLB_NR_DYN_ASIDS; asid++) { if (this_cpu_read(cpu_tlbstate.ctxs[asid].ctx_id) != next->context.ctx_id) continue; *new_asid = asid; *need_flush = (this_cpu_read(cpu_tlbstate.ctxs[asid].tlb_gen) < next_tlb_gen); return; } /* * We don't currently own an ASID slot on this CPU. * Allocate a slot. */ *new_asid = this_cpu_add_return(cpu_tlbstate.next_asid, 1) - 1; if (*new_asid >= TLB_NR_DYN_ASIDS) { *new_asid = 0; this_cpu_write(cpu_tlbstate.next_asid, 1); } *need_flush = true; } /* * Given an ASID, flush the corresponding user ASID. We can delay this * until the next time we switch to it. * * See SWITCH_TO_USER_CR3. */ static inline void invalidate_user_asid(u16 asid) { /* There is no user ASID if address space separation is off */ if (!IS_ENABLED(CONFIG_PAGE_TABLE_ISOLATION)) return; /* * We only have a single ASID if PCID is off and the CR3 * write will have flushed it. */ if (!cpu_feature_enabled(X86_FEATURE_PCID)) return; if (!static_cpu_has(X86_FEATURE_PTI)) return; __set_bit(kern_pcid(asid), (unsigned long *)this_cpu_ptr(&cpu_tlbstate.user_pcid_flush_mask)); } static void load_new_mm_cr3(pgd_t *pgdir, u16 new_asid, bool need_flush) { unsigned long new_mm_cr3; if (need_flush) { invalidate_user_asid(new_asid); new_mm_cr3 = build_cr3(pgdir, new_asid); } else { new_mm_cr3 = build_cr3_noflush(pgdir, new_asid); } /* * Caution: many callers of this function expect * that load_cr3() is serializing and orders TLB * fills with respect to the mm_cpumask writes. */ write_cr3(new_mm_cr3); } void leave_mm(int cpu) { struct mm_struct *loaded_mm = this_cpu_read(cpu_tlbstate.loaded_mm); /* * It's plausible that we're in lazy TLB mode while our mm is init_mm. * If so, our callers still expect us to flush the TLB, but there * aren't any user TLB entries in init_mm to worry about. * * This needs to happen before any other sanity checks due to * intel_idle's shenanigans. */ if (loaded_mm == &init_mm) return; /* Warn if we're not lazy. */ WARN_ON(!this_cpu_read(cpu_tlbstate.is_lazy)); switch_mm(NULL, &init_mm, NULL); } EXPORT_SYMBOL_GPL(leave_mm); void switch_mm(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) { unsigned long flags; local_irq_save(flags); switch_mm_irqs_off(prev, next, tsk); local_irq_restore(flags); } static inline unsigned long mm_mangle_tif_spec_ib(struct task_struct *next) { unsigned long next_tif = task_thread_info(next)->flags; unsigned long ibpb = (next_tif >> TIF_SPEC_IB) & LAST_USER_MM_IBPB; return (unsigned long)next->mm | ibpb; } static void cond_ibpb(struct task_struct *next) { if (!next || !next->mm) return; /* * Both, the conditional and the always IBPB mode use the mm * pointer to avoid the IBPB when switching between tasks of the * same process. Using the mm pointer instead of mm->context.ctx_id * opens a hypothetical hole vs. mm_struct reuse, which is more or * less impossible to control by an attacker. Aside of that it * would only affect the first schedule so the theoretically * exposed data is not really interesting. */ if (static_branch_likely(&switch_mm_cond_ibpb)) { unsigned long prev_mm, next_mm; /* * This is a bit more complex than the always mode because * it has to handle two cases: * * 1) Switch from a user space task (potential attacker) * which has TIF_SPEC_IB set to a user space task * (potential victim) which has TIF_SPEC_IB not set. * * 2) Switch from a user space task (potential attacker) * which has TIF_SPEC_IB not set to a user space task * (potential victim) which has TIF_SPEC_IB set. * * This could be done by unconditionally issuing IBPB when * a task which has TIF_SPEC_IB set is either scheduled in * or out. Though that results in two flushes when: * * - the same user space task is scheduled out and later * scheduled in again and only a kernel thread ran in * between. * * - a user space task belonging to the same process is * scheduled in after a kernel thread ran in between * * - a user space task belonging to the same process is * scheduled in immediately. * * Optimize this with reasonably small overhead for the * above cases. Mangle the TIF_SPEC_IB bit into the mm * pointer of the incoming task which is stored in * cpu_tlbstate.last_user_mm_ibpb for comparison. */ next_mm = mm_mangle_tif_spec_ib(next); prev_mm = this_cpu_read(cpu_tlbstate.last_user_mm_ibpb); /* * Issue IBPB only if the mm's are different and one or * both have the IBPB bit set. */ if (next_mm != prev_mm && (next_mm | prev_mm) & LAST_USER_MM_IBPB) indirect_branch_prediction_barrier(); this_cpu_write(cpu_tlbstate.last_user_mm_ibpb, next_mm); } if (static_branch_unlikely(&switch_mm_always_ibpb)) { /* * Only flush when switching to a user space task with a * different context than the user space task which ran * last on this CPU. */ if (this_cpu_read(cpu_tlbstate.last_user_mm) != next->mm) { indirect_branch_prediction_barrier(); this_cpu_write(cpu_tlbstate.last_user_mm, next->mm); } } } #ifdef CONFIG_PERF_EVENTS static inline void cr4_update_pce_mm(struct mm_struct *mm) { if (static_branch_unlikely(&rdpmc_always_available_key) || (!static_branch_unlikely(&rdpmc_never_available_key) && atomic_read(&mm->context.perf_rdpmc_allowed))) cr4_set_bits_irqsoff(X86_CR4_PCE); else cr4_clear_bits_irqsoff(X86_CR4_PCE); } void cr4_update_pce(void *ignored) { cr4_update_pce_mm(this_cpu_read(cpu_tlbstate.loaded_mm)); } #else static inline void cr4_update_pce_mm(struct mm_struct *mm) { } #endif void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next, struct task_struct *tsk) { struct mm_struct *real_prev = this_cpu_read(cpu_tlbstate.loaded_mm); u16 prev_asid = this_cpu_read(cpu_tlbstate.loaded_mm_asid); bool was_lazy = this_cpu_read(cpu_tlbstate.is_lazy); unsigned cpu = smp_processor_id(); u64 next_tlb_gen; bool need_flush; u16 new_asid; /* * NB: The scheduler will call us with prev == next when switching * from lazy TLB mode to normal mode if active_mm isn't changing. * When this happens, we don't assume that CR3 (and hence * cpu_tlbstate.loaded_mm) matches next. * * NB: leave_mm() calls us with prev == NULL and tsk == NULL. */ /* We don't want flush_tlb_func_* to run concurrently with us. */ if (IS_ENABLED(CONFIG_PROVE_LOCKING)) WARN_ON_ONCE(!irqs_disabled()); /* * Verify that CR3 is what we think it is. This will catch * hypothetical buggy code that directly switches to swapper_pg_dir * without going through leave_mm() / switch_mm_irqs_off() or that * does something like write_cr3(read_cr3_pa()). * * Only do this check if CONFIG_DEBUG_VM=y because __read_cr3() * isn't free. */ #ifdef CONFIG_DEBUG_VM if (WARN_ON_ONCE(__read_cr3() != build_cr3(real_prev->pgd, prev_asid))) { /* * If we were to BUG here, we'd be very likely to kill * the system so hard that we don't see the call trace. * Try to recover instead by ignoring the error and doing * a global flush to minimize the chance of corruption. * * (This is far from being a fully correct recovery. * Architecturally, the CPU could prefetch something * back into an incorrect ASID slot and leave it there * to cause trouble down the road. It's better than * nothing, though.) */ __flush_tlb_all(); } #endif this_cpu_write(cpu_tlbstate.is_lazy, false); /* * The membarrier system call requires a full memory barrier and * core serialization before returning to user-space, after * storing to rq->curr, when changing mm. This is because * membarrier() sends IPIs to all CPUs that are in the target mm * to make them issue memory barriers. However, if another CPU * switches to/from the target mm concurrently with * membarrier(), it can cause that CPU not to receive an IPI * when it really should issue a memory barrier. Writing to CR3 * provides that full memory barrier and core serializing * instruction. */ if (real_prev == next) { VM_WARN_ON(this_cpu_read(cpu_tlbstate.ctxs[prev_asid].ctx_id) != next->context.ctx_id); /* * Even in lazy TLB mode, the CPU should stay set in the * mm_cpumask. The TLB shootdown code can figure out from * from cpu_tlbstate.is_lazy whether or not to send an IPI. */ if (WARN_ON_ONCE(real_prev != &init_mm && !cpumask_test_cpu(cpu, mm_cpumask(next)))) cpumask_set_cpu(cpu, mm_cpumask(next)); /* * If the CPU is not in lazy TLB mode, we are just switching * from one thread in a process to another thread in the same * process. No TLB flush required. */ if (!was_lazy) return; /* * Read the tlb_gen to check whether a flush is needed. * If the TLB is up to date, just use it. * The barrier synchronizes with the tlb_gen increment in * the TLB shootdown code. */ smp_mb(); next_tlb_gen = atomic64_read(&next->context.tlb_gen); if (this_cpu_read(cpu_tlbstate.ctxs[prev_asid].tlb_gen) == next_tlb_gen) return; /* * TLB contents went out of date while we were in lazy * mode. Fall through to the TLB switching code below. */ new_asid = prev_asid; need_flush = true; } else { /* * Avoid user/user BTB poisoning by flushing the branch * predictor when switching between processes. This stops * one process from doing Spectre-v2 attacks on another. */ cond_ibpb(tsk); /* * Stop remote flushes for the previous mm. * Skip kernel threads; we never send init_mm TLB flushing IPIs, * but the bitmap manipulation can cause cache line contention. */ if (real_prev != &init_mm) { VM_WARN_ON_ONCE(!cpumask_test_cpu(cpu, mm_cpumask(real_prev))); cpumask_clear_cpu(cpu, mm_cpumask(real_prev)); } /* * Start remote flushes and then read tlb_gen. */ if (next != &init_mm) cpumask_set_cpu(cpu, mm_cpumask(next)); next_tlb_gen = atomic64_read(&next->context.tlb_gen); choose_new_asid(next, next_tlb_gen, &new_asid, &need_flush); /* Let nmi_uaccess_okay() know that we're changing CR3. */ this_cpu_write(cpu_tlbstate.loaded_mm, LOADED_MM_SWITCHING); barrier(); } if (need_flush) { this_cpu_write(cpu_tlbstate.ctxs[new_asid].ctx_id, next->context.ctx_id); this_cpu_write(cpu_tlbstate.ctxs[new_asid].tlb_gen, next_tlb_gen); load_new_mm_cr3(next->pgd, new_asid, true); trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, TLB_FLUSH_ALL); } else { /* The new ASID is already up to date. */ load_new_mm_cr3(next->pgd, new_asid, false); trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, 0); } /* Make sure we write CR3 before loaded_mm. */ barrier(); this_cpu_write(cpu_tlbstate.loaded_mm, next); this_cpu_write(cpu_tlbstate.loaded_mm_asid, new_asid); if (next != real_prev) { cr4_update_pce_mm(next); switch_ldt(real_prev, next); } } /* * Please ignore the name of this function. It should be called * switch_to_kernel_thread(). * * enter_lazy_tlb() is a hint from the scheduler that we are entering a * kernel thread or other context without an mm. Acceptable implementations * include doing nothing whatsoever, switching to init_mm, or various clever * lazy tricks to try to minimize TLB flushes. * * The scheduler reserves the right to call enter_lazy_tlb() several times * in a row. It will notify us that we're going back to a real mm by * calling switch_mm_irqs_off(). */ void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) { if (this_cpu_read(cpu_tlbstate.loaded_mm) == &init_mm) return; this_cpu_write(cpu_tlbstate.is_lazy, true); } /* * Call this when reinitializing a CPU. It fixes the following potential * problems: * * - The ASID changed from what cpu_tlbstate thinks it is (most likely * because the CPU was taken down and came back up with CR3's PCID * bits clear. CPU hotplug can do this. * * - The TLB contains junk in slots corresponding to inactive ASIDs. * * - The CPU went so far out to lunch that it may have missed a TLB * flush. */ void initialize_tlbstate_and_flush(void) { int i; struct mm_struct *mm = this_cpu_read(cpu_tlbstate.loaded_mm); u64 tlb_gen = atomic64_read(&init_mm.context.tlb_gen); unsigned long cr3 = __read_cr3(); /* Assert that CR3 already references the right mm. */ WARN_ON((cr3 & CR3_ADDR_MASK) != __pa(mm->pgd)); /* * Assert that CR4.PCIDE is set if needed. (CR4.PCIDE initialization * doesn't work like other CR4 bits because it can only be set from * long mode.) */ WARN_ON(boot_cpu_has(X86_FEATURE_PCID) && !(cr4_read_shadow() & X86_CR4_PCIDE)); /* Force ASID 0 and force a TLB flush. */ write_cr3(build_cr3(mm->pgd, 0)); /* Reinitialize tlbstate. */ this_cpu_write(cpu_tlbstate.last_user_mm_ibpb, LAST_USER_MM_IBPB); this_cpu_write(cpu_tlbstate.loaded_mm_asid, 0); this_cpu_write(cpu_tlbstate.next_asid, 1); this_cpu_write(cpu_tlbstate.ctxs[0].ctx_id, mm->context.ctx_id); this_cpu_write(cpu_tlbstate.ctxs[0].tlb_gen, tlb_gen); for (i = 1; i < TLB_NR_DYN_ASIDS; i++) this_cpu_write(cpu_tlbstate.ctxs[i].ctx_id, 0); } /* * flush_tlb_func_common()'s memory ordering requirement is that any * TLB fills that happen after we flush the TLB are ordered after we * read active_mm's tlb_gen. We don't need any explicit barriers * because all x86 flush operations are serializing and the * atomic64_read operation won't be reordered by the compiler. */ static void flush_tlb_func_common(const struct flush_tlb_info *f, bool local, enum tlb_flush_reason reason) { /* * We have three different tlb_gen values in here. They are: * * - mm_tlb_gen: the latest generation. * - local_tlb_gen: the generation that this CPU has already caught * up to. * - f->new_tlb_gen: the generation that the requester of the flush * wants us to catch up to. */ struct mm_struct *loaded_mm = this_cpu_read(cpu_tlbstate.loaded_mm); u32 loaded_mm_asid = this_cpu_read(cpu_tlbstate.loaded_mm_asid); u64 mm_tlb_gen = atomic64_read(&loaded_mm->context.tlb_gen); u64 local_tlb_gen = this_cpu_read(cpu_tlbstate.ctxs[loaded_mm_asid].tlb_gen); /* This code cannot presently handle being reentered. */ VM_WARN_ON(!irqs_disabled()); if (unlikely(loaded_mm == &init_mm)) return; VM_WARN_ON(this_cpu_read(cpu_tlbstate.ctxs[loaded_mm_asid].ctx_id) != loaded_mm->context.ctx_id); if (this_cpu_read(cpu_tlbstate.is_lazy)) { /* * We're in lazy mode. We need to at least flush our * paging-structure cache to avoid speculatively reading * garbage into our TLB. Since switching to init_mm is barely * slower than a minimal flush, just switch to init_mm. * * This should be rare, with native_flush_tlb_others skipping * IPIs to lazy TLB mode CPUs. */ switch_mm_irqs_off(NULL, &init_mm, NULL); return; } if (unlikely(local_tlb_gen == mm_tlb_gen)) { /* * There's nothing to do: we're already up to date. This can * happen if two concurrent flushes happen -- the first flush to * be handled can catch us all the way up, leaving no work for * the second flush. */ trace_tlb_flush(reason, 0); return; } WARN_ON_ONCE(local_tlb_gen > mm_tlb_gen); WARN_ON_ONCE(f->new_tlb_gen > mm_tlb_gen); /* * If we get to this point, we know that our TLB is out of date. * This does not strictly imply that we need to flush (it's * possible that f->new_tlb_gen <= local_tlb_gen), but we're * going to need to flush in the very near future, so we might * as well get it over with. * * The only question is whether to do a full or partial flush. * * We do a partial flush if requested and two extra conditions * are met: * * 1. f->new_tlb_gen == local_tlb_gen + 1. We have an invariant that * we've always done all needed flushes to catch up to * local_tlb_gen. If, for example, local_tlb_gen == 2 and * f->new_tlb_gen == 3, then we know that the flush needed to bring * us up to date for tlb_gen 3 is the partial flush we're * processing. * * As an example of why this check is needed, suppose that there * are two concurrent flushes. The first is a full flush that * changes context.tlb_gen from 1 to 2. The second is a partial * flush that changes context.tlb_gen from 2 to 3. If they get * processed on this CPU in reverse order, we'll see * local_tlb_gen == 1, mm_tlb_gen == 3, and end != TLB_FLUSH_ALL. * If we were to use __flush_tlb_one_user() and set local_tlb_gen to * 3, we'd be break the invariant: we'd update local_tlb_gen above * 1 without the full flush that's needed for tlb_gen 2. * * 2. f->new_tlb_gen == mm_tlb_gen. This is purely an optimization. * Partial TLB flushes are not all that much cheaper than full TLB * flushes, so it seems unlikely that it would be a performance win * to do a partial flush if that won't bring our TLB fully up to * date. By doing a full flush instead, we can increase * local_tlb_gen all the way to mm_tlb_gen and we can probably * avoid another flush in the very near future. */ if (f->end != TLB_FLUSH_ALL && f->new_tlb_gen == local_tlb_gen + 1 && f->new_tlb_gen == mm_tlb_gen) { /* Partial flush */ unsigned long nr_invalidate = (f->end - f->start) >> f->stride_shift; unsigned long addr = f->start; while (addr < f->end) { flush_tlb_one_user(addr); addr += 1UL << f->stride_shift; } if (local) count_vm_tlb_events(NR_TLB_LOCAL_FLUSH_ONE, nr_invalidate); trace_tlb_flush(reason, nr_invalidate); } else { /* Full flush. */ flush_tlb_local(); if (local) count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL); trace_tlb_flush(reason, TLB_FLUSH_ALL); } /* Both paths above update our state to mm_tlb_gen. */ this_cpu_write(cpu_tlbstate.ctxs[loaded_mm_asid].tlb_gen, mm_tlb_gen); } static void flush_tlb_func_local(const void *info, enum tlb_flush_reason reason) { const struct flush_tlb_info *f = info; flush_tlb_func_common(f, true, reason); } static void flush_tlb_func_remote(void *info) { const struct flush_tlb_info *f = info; inc_irq_stat(irq_tlb_count); if (f->mm && f->mm != this_cpu_read(cpu_tlbstate.loaded_mm)) return; count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED); flush_tlb_func_common(f, false, TLB_REMOTE_SHOOTDOWN); } static bool tlb_is_not_lazy(int cpu, void *data) { return !per_cpu(cpu_tlbstate.is_lazy, cpu); } STATIC_NOPV void native_flush_tlb_others(const struct cpumask *cpumask, const struct flush_tlb_info *info) { count_vm_tlb_event(NR_TLB_REMOTE_FLUSH); if (info->end == TLB_FLUSH_ALL) trace_tlb_flush(TLB_REMOTE_SEND_IPI, TLB_FLUSH_ALL); else trace_tlb_flush(TLB_REMOTE_SEND_IPI, (info->end - info->start) >> PAGE_SHIFT); /* * If no page tables were freed, we can skip sending IPIs to * CPUs in lazy TLB mode. They will flush the CPU themselves * at the next context switch. * * However, if page tables are getting freed, we need to send the * IPI everywhere, to prevent CPUs in lazy TLB mode from tripping * up on the new contents of what used to be page tables, while * doing a speculative memory access. */ if (info->freed_tables) smp_call_function_many(cpumask, flush_tlb_func_remote, (void *)info, 1); else on_each_cpu_cond_mask(tlb_is_not_lazy, flush_tlb_func_remote, (void *)info, 1, cpumask); } void flush_tlb_others(const struct cpumask *cpumask, const struct flush_tlb_info *info) { __flush_tlb_others(cpumask, info); } /* * See Documentation/x86/tlb.rst for details. We choose 33 * because it is large enough to cover the vast majority (at * least 95%) of allocations, and is small enough that we are * confident it will not cause too much overhead. Each single * flush is about 100 ns, so this caps the maximum overhead at * _about_ 3,000 ns. * * This is in units of pages. */ unsigned long tlb_single_page_flush_ceiling __read_mostly = 33; static DEFINE_PER_CPU_SHARED_ALIGNED(struct flush_tlb_info, flush_tlb_info); #ifdef CONFIG_DEBUG_VM static DEFINE_PER_CPU(unsigned int, flush_tlb_info_idx); #endif static inline struct flush_tlb_info *get_flush_tlb_info(struct mm_struct *mm, unsigned long start, unsigned long end, unsigned int stride_shift, bool freed_tables, u64 new_tlb_gen) { struct flush_tlb_info *info = this_cpu_ptr(&flush_tlb_info); #ifdef CONFIG_DEBUG_VM /* * Ensure that the following code is non-reentrant and flush_tlb_info * is not overwritten. This means no TLB flushing is initiated by * interrupt handlers and machine-check exception handlers. */ BUG_ON(this_cpu_inc_return(flush_tlb_info_idx) != 1); #endif info->start = start; info->end = end; info->mm = mm; info->stride_shift = stride_shift; info->freed_tables = freed_tables; info->new_tlb_gen = new_tlb_gen; return info; } static inline void put_flush_tlb_info(void) { #ifdef CONFIG_DEBUG_VM /* Complete reentrancy prevention checks */ barrier(); this_cpu_dec(flush_tlb_info_idx); #endif } void flush_tlb_mm_range(struct mm_struct *mm, unsigned long start, unsigned long end, unsigned int stride_shift, bool freed_tables) { struct flush_tlb_info *info; u64 new_tlb_gen; int cpu; cpu = get_cpu(); /* Should we flush just the requested range? */ if ((end == TLB_FLUSH_ALL) || ((end - start) >> stride_shift) > tlb_single_page_flush_ceiling) { start = 0; end = TLB_FLUSH_ALL; } /* This is also a barrier that synchronizes with switch_mm(). */ new_tlb_gen = inc_mm_tlb_gen(mm); info = get_flush_tlb_info(mm, start, end, stride_shift, freed_tables, new_tlb_gen); if (mm == this_cpu_read(cpu_tlbstate.loaded_mm)) { lockdep_assert_irqs_enabled(); local_irq_disable(); flush_tlb_func_local(info, TLB_LOCAL_MM_SHOOTDOWN); local_irq_enable(); } if (cpumask_any_but(mm_cpumask(mm), cpu) < nr_cpu_ids) flush_tlb_others(mm_cpumask(mm), info); put_flush_tlb_info(); put_cpu(); } static void do_flush_tlb_all(void *info) { count_vm_tlb_event(NR_TLB_REMOTE_FLUSH_RECEIVED); __flush_tlb_all(); } void flush_tlb_all(void) { count_vm_tlb_event(NR_TLB_REMOTE_FLUSH); on_each_cpu(do_flush_tlb_all, NULL, 1); } static void do_kernel_range_flush(void *info) { struct flush_tlb_info *f = info; unsigned long addr; /* flush range by one by one 'invlpg' */ for (addr = f->start; addr < f->end; addr += PAGE_SIZE) flush_tlb_one_kernel(addr); } void flush_tlb_kernel_range(unsigned long start, unsigned long end) { /* Balance as user space task's flush, a bit conservative */ if (end == TLB_FLUSH_ALL || (end - start) > tlb_single_page_flush_ceiling << PAGE_SHIFT) { on_each_cpu(do_flush_tlb_all, NULL, 1); } else { struct flush_tlb_info *info; preempt_disable(); info = get_flush_tlb_info(NULL, start, end, 0, false, 0); on_each_cpu(do_kernel_range_flush, info, 1); put_flush_tlb_info(); preempt_enable(); } } /* * This can be used from process context to figure out what the value of * CR3 is without needing to do a (slow) __read_cr3(). * * It's intended to be used for code like KVM that sneakily changes CR3 * and needs to restore it. It needs to be used very carefully. */ unsigned long __get_current_cr3_fast(void) { unsigned long cr3 = build_cr3(this_cpu_read(cpu_tlbstate.loaded_mm)->pgd, this_cpu_read(cpu_tlbstate.loaded_mm_asid)); /* For now, be very restrictive about when this can be called. */ VM_WARN_ON(in_nmi() || preemptible()); VM_BUG_ON(cr3 != __read_cr3()); return cr3; } EXPORT_SYMBOL_GPL(__get_current_cr3_fast); /* * Flush one page in the kernel mapping */ void flush_tlb_one_kernel(unsigned long addr) { count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ONE); /* * If PTI is off, then __flush_tlb_one_user() is just INVLPG or its * paravirt equivalent. Even with PCID, this is sufficient: we only * use PCID if we also use global PTEs for the kernel mapping, and * INVLPG flushes global translations across all address spaces. * * If PTI is on, then the kernel is mapped with non-global PTEs, and * __flush_tlb_one_user() will flush the given address for the current * kernel address space and for its usermode counterpart, but it does * not flush it for other address spaces. */ flush_tlb_one_user(addr); if (!static_cpu_has(X86_FEATURE_PTI)) return; /* * See above. We need to propagate the flush to all other address * spaces. In principle, we only need to propagate it to kernelmode * address spaces, but the extra bookkeeping we would need is not * worth it. */ this_cpu_write(cpu_tlbstate.invalidate_other, true); } /* * Flush one page in the user mapping */ STATIC_NOPV void native_flush_tlb_one_user(unsigned long addr) { u32 loaded_mm_asid = this_cpu_read(cpu_tlbstate.loaded_mm_asid); asm volatile("invlpg (%0)" ::"r" (addr) : "memory"); if (!static_cpu_has(X86_FEATURE_PTI)) return; /* * Some platforms #GP if we call invpcid(type=1/2) before CR4.PCIDE=1. * Just use invalidate_user_asid() in case we are called early. */ if (!this_cpu_has(X86_FEATURE_INVPCID_SINGLE)) invalidate_user_asid(loaded_mm_asid); else invpcid_flush_one(user_pcid(loaded_mm_asid), addr); } void flush_tlb_one_user(unsigned long addr) { __flush_tlb_one_user(addr); } /* * Flush everything */ STATIC_NOPV void native_flush_tlb_global(void) { unsigned long cr4, flags; if (static_cpu_has(X86_FEATURE_INVPCID)) { /* * Using INVPCID is considerably faster than a pair of writes * to CR4 sandwiched inside an IRQ flag save/restore. * * Note, this works with CR4.PCIDE=0 or 1. */ invpcid_flush_all(); return; } /* * Read-modify-write to CR4 - protect it from preemption and * from interrupts. (Use the raw variant because this code can * be called from deep inside debugging code.) */ raw_local_irq_save(flags); cr4 = this_cpu_read(cpu_tlbstate.cr4); /* toggle PGE */ native_write_cr4(cr4 ^ X86_CR4_PGE); /* write old PGE again and flush TLBs */ native_write_cr4(cr4); raw_local_irq_restore(flags); } /* * Flush the entire current user mapping */ STATIC_NOPV void native_flush_tlb_local(void) { /* * Preemption or interrupts must be disabled to protect the access * to the per CPU variable and to prevent being preempted between * read_cr3() and write_cr3(). */ WARN_ON_ONCE(preemptible()); invalidate_user_asid(this_cpu_read(cpu_tlbstate.loaded_mm_asid)); /* If current->mm == NULL then the read_cr3() "borrows" an mm */ native_write_cr3(__native_read_cr3()); } void flush_tlb_local(void) { __flush_tlb_local(); } /* * Flush everything */ void __flush_tlb_all(void) { /* * This is to catch users with enabled preemption and the PGE feature * and don't trigger the warning in __native_flush_tlb(). */ VM_WARN_ON_ONCE(preemptible()); if (boot_cpu_has(X86_FEATURE_PGE)) { __flush_tlb_global(); } else { /* * !PGE -> !PCID (setup_pcid()), thus every flush is total. */ flush_tlb_local(); } } EXPORT_SYMBOL_GPL(__flush_tlb_all); /* * arch_tlbbatch_flush() performs a full TLB flush regardless of the active mm. * This means that the 'struct flush_tlb_info' that describes which mappings to * flush is actually fixed. We therefore set a single fixed struct and use it in * arch_tlbbatch_flush(). */ static const struct flush_tlb_info full_flush_tlb_info = { .mm = NULL, .start = 0, .end = TLB_FLUSH_ALL, }; void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch) { int cpu = get_cpu(); if (cpumask_test_cpu(cpu, &batch->cpumask)) { lockdep_assert_irqs_enabled(); local_irq_disable(); flush_tlb_func_local(&full_flush_tlb_info, TLB_LOCAL_SHOOTDOWN); local_irq_enable(); } if (cpumask_any_but(&batch->cpumask, cpu) < nr_cpu_ids) flush_tlb_others(&batch->cpumask, &full_flush_tlb_info); cpumask_clear(&batch->cpumask); put_cpu(); } /* * Blindly accessing user memory from NMI context can be dangerous * if we're in the middle of switching the current user task or * switching the loaded mm. It can also be dangerous if we * interrupted some kernel code that was temporarily using a * different mm. */ bool nmi_uaccess_okay(void) { struct mm_struct *loaded_mm = this_cpu_read(cpu_tlbstate.loaded_mm); struct mm_struct *current_mm = current->mm; VM_WARN_ON_ONCE(!loaded_mm); /* * The condition we want to check is * current_mm->pgd == __va(read_cr3_pa()). This may be slow, though, * if we're running in a VM with shadow paging, and nmi_uaccess_okay() * is supposed to be reasonably fast. * * Instead, we check the almost equivalent but somewhat conservative * condition below, and we rely on the fact that switch_mm_irqs_off() * sets loaded_mm to LOADED_MM_SWITCHING before writing to CR3. */ if (loaded_mm != current_mm) return false; VM_WARN_ON_ONCE(current_mm->pgd != __va(read_cr3_pa())); return true; } static ssize_t tlbflush_read_file(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { char buf[32]; unsigned int len; len = sprintf(buf, "%ld\n", tlb_single_page_flush_ceiling); return simple_read_from_buffer(user_buf, count, ppos, buf, len); } static ssize_t tlbflush_write_file(struct file *file, const char __user *user_buf, size_t count, loff_t *ppos) { char buf[32]; ssize_t len; int ceiling; len = min(count, sizeof(buf) - 1); if (copy_from_user(buf, user_buf, len)) return -EFAULT; buf[len] = '\0'; if (kstrtoint(buf, 0, &ceiling)) return -EINVAL; if (ceiling < 0) return -EINVAL; tlb_single_page_flush_ceiling = ceiling; return count; } static const struct file_operations fops_tlbflush = { .read = tlbflush_read_file, .write = tlbflush_write_file, .llseek = default_llseek, }; static int __init create_tlb_single_page_flush_ceiling(void) { debugfs_create_file("tlb_single_page_flush_ceiling", S_IRUSR | S_IWUSR, arch_debugfs_dir, NULL, &fops_tlbflush); return 0; } late_initcall(create_tlb_single_page_flush_ceiling);