# SPDX-License-Identifier: GPL-2.0 menu "Board support" config SOLUTION_ENGINE bool config SH_ALPHA_BOARD bool config SH_DEVICE_TREE bool "Board Described by Device Tree" select OF select OF_EARLY_FLATTREE select TIMER_OF select COMMON_CLK select GENERIC_CALIBRATE_DELAY help Select Board Described by Device Tree to build a kernel that does not hard-code any board-specific knowledge but instead uses a device tree blob provided by the boot-loader. You must enable drivers for any hardware you want to use separately. At this time, only boards based on the open-hardware J-Core processors have sufficient driver coverage to use this option; do not select it if you are using original SuperH hardware. config SH_JCORE_SOC bool "J-Core SoC" depends on SH_DEVICE_TREE && (CPU_SH2 || CPU_J2) select CLKSRC_JCORE_PIT select JCORE_AIC default y if CPU_J2 help Select this option to include drivers core components of the J-Core SoC, including interrupt controllers and timers. config SH_SOLUTION_ENGINE bool "SolutionEngine" select SOLUTION_ENGINE select CPU_HAS_IPR_IRQ depends on CPU_SUBTYPE_SH7705 || CPU_SUBTYPE_SH7709 || CPU_SUBTYPE_SH7710 || \ CPU_SUBTYPE_SH7712 || CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7750S || \ CPU_SUBTYPE_SH7750R help Select SolutionEngine if configuring for a Hitachi SH7705, SH7709, SH7710, SH7712, SH7750, SH7750S or SH7750R evaluation board. config SH_7206_SOLUTION_ENGINE bool "SolutionEngine7206" select SOLUTION_ENGINE depends on CPU_SUBTYPE_SH7206 help Select 7206 SolutionEngine if configuring for a Hitachi SH7206 evaluation board. config SH_7619_SOLUTION_ENGINE bool "SolutionEngine7619" select SOLUTION_ENGINE depends on CPU_SUBTYPE_SH7619 help Select 7619 SolutionEngine if configuring for a Hitachi SH7619 evaluation board. config SH_7721_SOLUTION_ENGINE bool "SolutionEngine7721" select SOLUTION_ENGINE depends on CPU_SUBTYPE_SH7721 help Select 7721 SolutionEngine if configuring for a Hitachi SH7721 evaluation board. config SH_7722_SOLUTION_ENGINE bool "SolutionEngine7722" select SOLUTION_ENGINE select GENERIC_IRQ_CHIP select IRQ_DOMAIN depends on CPU_SUBTYPE_SH7722 help Select 7722 SolutionEngine if configuring for a Hitachi SH772 evaluation board. config SH_7724_SOLUTION_ENGINE bool "SolutionEngine7724" select SOLUTION_ENGINE depends on CPU_SUBTYPE_SH7724 select GPIOLIB select SND_SOC_AK4642 if SND_SIMPLE_CARD select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select 7724 SolutionEngine if configuring for a Hitachi SH7724 evaluation board. config SH_7751_SOLUTION_ENGINE bool "SolutionEngine7751" select SOLUTION_ENGINE select CPU_HAS_IPR_IRQ depends on CPU_SUBTYPE_SH7751 help Select 7751 SolutionEngine if configuring for a Hitachi SH7751 evaluation board. config SH_7780_SOLUTION_ENGINE bool "SolutionEngine7780" select SOLUTION_ENGINE select HAVE_PCI depends on CPU_SUBTYPE_SH7780 help Select 7780 SolutionEngine if configuring for a Renesas SH7780 evaluation board. config SH_7343_SOLUTION_ENGINE bool "SolutionEngine7343" select SOLUTION_ENGINE select GENERIC_IRQ_CHIP select IRQ_DOMAIN depends on CPU_SUBTYPE_SH7343 help Select 7343 SolutionEngine if configuring for a Hitachi SH7343 (SH-Mobile 3AS) evaluation board. config SH_HP6XX bool "HP6XX" select SYS_SUPPORTS_APM_EMULATION select HD6446X_SERIES depends on CPU_SUBTYPE_SH7709 help Select HP6XX if configuring for a HP jornada HP6xx. More information (hardware only) at . config SH_DREAMCAST bool "Dreamcast" select HAVE_PCI depends on CPU_SUBTYPE_SH7091 help Select Dreamcast if configuring for a SEGA Dreamcast. More information at config SH_SH03 bool "Interface CTP/PCI-SH03" depends on CPU_SUBTYPE_SH7751 select CPU_HAS_IPR_IRQ select HAVE_PCI help CTP/PCI-SH03 is a CPU module computer that is produced by Interface Corporation. More information at config SH_SECUREEDGE5410 bool "SecureEdge5410" depends on CPU_SUBTYPE_SH7751R select CPU_HAS_IPR_IRQ select HAVE_PCI help Select SecureEdge5410 if configuring for a SnapGear SH board. This includes both the OEM SecureEdge products as well as the SME product line. config SH_RTS7751R2D bool "RTS7751R2D" depends on CPU_SUBTYPE_SH7751R select HAVE_PCI select IO_TRAPPED if MMU help Select RTS7751R2D if configuring for a Renesas Technology Sales SH-Graphics board. config SH_RSK bool "Renesas Starter Kit" depends on CPU_SUBTYPE_SH7201 || CPU_SUBTYPE_SH7203 || \ CPU_SUBTYPE_SH7264 || CPU_SUBTYPE_SH7269 select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select this option if configuring for any of the RSK+ MCU evaluation platforms. config SH_SDK7780 bool "SDK7780R3" depends on CPU_SUBTYPE_SH7780 select HAVE_PCI help Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3 evaluation board. config SH_SDK7786 bool "SDK7786" depends on CPU_SUBTYPE_SH7786 select HAVE_PCI select NO_IOPORT_MAP if !PCI select HAVE_SRAM_POOL select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select SDK7786 if configuring for a Renesas Technology Europe SH7786-65nm board. config SH_HIGHLANDER bool "Highlander" depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 select HAVE_PCI select IO_TRAPPED if MMU config SH_SH7757LCR bool "SH7757LCR" depends on CPU_SUBTYPE_SH7757 select GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR config SH_SH7785LCR bool "SH7785LCR" depends on CPU_SUBTYPE_SH7785 select HAVE_PCI config SH_SH7785LCR_29BIT_PHYSMAPS bool "SH7785LCR 29bit physmaps" depends on SH_SH7785LCR && 29BIT default y help This board has 2 physical memory maps. It can be changed with DIP switch(S2-5). If you set the DIP switch for S2-5 = ON, you can access all on-board device in 29bit address mode. config SH_SH7785LCR_PT bool "SH7785LCR prototype board on 32-bit MMU mode" depends on SH_SH7785LCR && 32BIT default n help If you use prototype board, this option is enabled. config SH_URQUELL bool "Urquell" depends on CPU_SUBTYPE_SH7786 select GPIOLIB select HAVE_PCI select NO_IOPORT_MAP if !PCI config SH_MIGOR bool "Migo-R" depends on CPU_SUBTYPE_SH7722 select GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select Migo-R if configuring for the SH7722 Migo-R platform by Renesas System Solutions Asia Pte. Ltd. config SH_AP325RXA bool "AP-325RXA" depends on CPU_SUBTYPE_SH7723 select GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR help Renesas "AP-325RXA" support. Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" config SH_KFR2R09 bool "KFR2R09" depends on CPU_SUBTYPE_SH7724 select GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR help "Kit For R2R for 2009" support. config SH_ECOVEC bool "EcoVec" depends on CPU_SUBTYPE_SH7724 select GPIOLIB select SND_SOC_DA7210 if SND_SIMPLE_CARD select REGULATOR_FIXED_VOLTAGE if REGULATOR help Renesas "R0P7724LC0011/21RL (EcoVec)" support. config SH_SH7763RDP bool "SH7763RDP" depends on CPU_SUBTYPE_SH7763 help Select SH7763RDP if configuring for a Renesas SH7763 evaluation board. config SH_ESPT bool "ESPT" depends on CPU_SUBTYPE_SH7763 help Select ESPT if configuring for a Renesas SH7763 with gigabit ether evaluation board. config SH_EDOSK7705 bool "EDOSK7705" depends on CPU_SUBTYPE_SH7705 config SH_EDOSK7760 bool "EDOSK7760" depends on CPU_SUBTYPE_SH7760 help Select if configuring for a Renesas EDOSK7760 evaluation board. config SH_SH4202_MICRODEV bool "SH4-202 MicroDev" depends on CPU_SUBTYPE_SH4_202 help Select SH4-202 MicroDev if configuring for a SuperH MicroDev board with an SH4-202 CPU. config SH_LANDISK bool "LANDISK" depends on CPU_SUBTYPE_SH7751R select HAVE_PCI help I-O DATA DEVICE, INC. "LANDISK Series" support. config SH_TITAN bool "TITAN" depends on CPU_SUBTYPE_SH7751R select CPU_HAS_IPR_IRQ select HAVE_PCI help Select Titan if you are configuring for a Nimble Microsystems NetEngine NP51R. config SH_SHMIN bool "SHMIN" depends on CPU_SUBTYPE_SH7706 select CPU_HAS_IPR_IRQ help Select SHMIN if configuring for the SHMIN board. config SH_LBOX_RE2 bool "L-BOX RE2" depends on CPU_SUBTYPE_SH7751R select HAVE_PCI help Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2. config SH_X3PROTO bool "SH-X3 Prototype board" depends on CPU_SUBTYPE_SHX3 select NO_IOPORT_MAP if !PCI select IRQ_DOMAIN config SH_MAGIC_PANEL_R2 bool "Magic Panel R2" depends on CPU_SUBTYPE_SH7720 select GPIOLIB select REGULATOR_FIXED_VOLTAGE if REGULATOR help Select Magic Panel R2 if configuring for Magic Panel R2. config SH_CAYMAN bool "Hitachi Cayman" depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103 select HAVE_PCI select ARCH_MIGHT_HAVE_PC_SERIO config SH_POLARIS bool "SMSC Polaris" select CPU_HAS_IPR_IRQ select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7709 help Select if configuring for an SMSC Polaris development board config SH_SH2007 bool "SH-2007 board" select NO_IOPORT_MAP select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7780 help SH-2007 is a single-board computer based around SH7780 chip intended for embedded applications. It has an Ethernet interface (SMC9118), direct connected Compact Flash socket, two serial ports and PC-104 bus. More information at . config SH_APSH4A3A bool "AP-SH4A-3A" select SH_ALPHA_BOARD select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7785 help Select AP-SH4A-3A if configuring for an ALPHAPROJECT AP-SH4A-3A. config SH_APSH4AD0A bool "AP-SH4AD-0A" select SH_ALPHA_BOARD select HAVE_PCI select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7786 help Select AP-SH4AD-0A if configuring for an ALPHAPROJECT AP-SH4AD-0A. source "arch/sh/boards/mach-r2d/Kconfig" source "arch/sh/boards/mach-highlander/Kconfig" source "arch/sh/boards/mach-sdk7780/Kconfig" source "arch/sh/boards/mach-migor/Kconfig" source "arch/sh/boards/mach-rsk/Kconfig" if SH_MAGIC_PANEL_R2 menu "Magic Panel R2 options" config SH_MAGIC_PANEL_R2_VERSION int "Magic Panel R2 Version" default "3" help Set the version of the Magic Panel R2 endmenu endif endmenu