// SPDX-License-Identifier: GPL-2.0-or-later /* * 64-bit pSeries and RS/6000 setup code. * * Copyright (C) 1995 Linus Torvalds * Adapted from 'alpha' version by Gary Thomas * Modified by Cort Dougan (cort@cs.nmt.edu) * Modified by PPC64 Team, IBM Corp */ /* * bootup setup stuff.. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "pseries.h" DEFINE_STATIC_KEY_FALSE(shared_processor); EXPORT_SYMBOL(shared_processor); #ifdef CONFIG_PARAVIRT_TIME_ACCOUNTING struct static_key paravirt_steal_enabled; struct static_key paravirt_steal_rq_enabled; static bool steal_acc = true; static int __init parse_no_stealacc(char *arg) { steal_acc = false; return 0; } early_param("no-steal-acc", parse_no_stealacc); #endif int CMO_PrPSP = -1; int CMO_SecPSP = -1; unsigned long CMO_PageSize = (ASM_CONST(1) << IOMMU_PAGE_SHIFT_4K); EXPORT_SYMBOL(CMO_PageSize); int fwnmi_active; /* TRUE if an FWNMI handler is present */ int ibm_nmi_interlock_token; u32 pseries_security_flavor; static void pSeries_show_cpuinfo(struct seq_file *m) { struct device_node *root; const char *model = ""; root = of_find_node_by_path("/"); if (root) model = of_get_property(root, "model", NULL); seq_printf(m, "machine\t\t: CHRP %s\n", model); of_node_put(root); if (radix_enabled()) seq_printf(m, "MMU\t\t: Radix\n"); else seq_printf(m, "MMU\t\t: Hash\n"); } /* Initialize firmware assisted non-maskable interrupts if * the firmware supports this feature. */ static void __init fwnmi_init(void) { unsigned long system_reset_addr, machine_check_addr; u8 *mce_data_buf; unsigned int i; int nr_cpus = num_possible_cpus(); #ifdef CONFIG_PPC_64S_HASH_MMU struct slb_entry *slb_ptr; size_t size; #endif int ibm_nmi_register_token; ibm_nmi_register_token = rtas_function_token(RTAS_FN_IBM_NMI_REGISTER); if (ibm_nmi_register_token == RTAS_UNKNOWN_SERVICE) return; ibm_nmi_interlock_token = rtas_function_token(RTAS_FN_IBM_NMI_INTERLOCK); if (WARN_ON(ibm_nmi_interlock_token == RTAS_UNKNOWN_SERVICE)) return; /* If the kernel's not linked at zero we point the firmware at low * addresses anyway, and use a trampoline to get to the real code. */ system_reset_addr = __pa(system_reset_fwnmi) - PHYSICAL_START; machine_check_addr = __pa(machine_check_fwnmi) - PHYSICAL_START; if (0 == rtas_call(ibm_nmi_register_token, 2, 1, NULL, system_reset_addr, machine_check_addr)) fwnmi_active = 1; /* * Allocate a chunk for per cpu buffer to hold rtas errorlog. * It will be used in real mode mce handler, hence it needs to be * below RMA. */ mce_data_buf = memblock_alloc_try_nid_raw(RTAS_ERROR_LOG_MAX * nr_cpus, RTAS_ERROR_LOG_MAX, MEMBLOCK_LOW_LIMIT, ppc64_rma_size, NUMA_NO_NODE); if (!mce_data_buf) panic("Failed to allocate %d bytes below %pa for MCE buffer\n", RTAS_ERROR_LOG_MAX * nr_cpus, &ppc64_rma_size); for_each_possible_cpu(i) { paca_ptrs[i]->mce_data_buf = mce_data_buf + (RTAS_ERROR_LOG_MAX * i); } #ifdef CONFIG_PPC_64S_HASH_MMU if (!radix_enabled()) { /* Allocate per cpu area to save old slb contents during MCE */ size = sizeof(struct slb_entry) * mmu_slb_size * nr_cpus; slb_ptr = memblock_alloc_try_nid_raw(size, sizeof(struct slb_entry), MEMBLOCK_LOW_LIMIT, ppc64_rma_size, NUMA_NO_NODE); if (!slb_ptr) panic("Failed to allocate %zu bytes below %pa for slb area\n", size, &ppc64_rma_size); for_each_possible_cpu(i) paca_ptrs[i]->mce_faulty_slbs = slb_ptr + (mmu_slb_size * i); } #endif } /* * Affix a device for the first timer to the platform bus if * we have firmware support for the H_WATCHDOG hypercall. */ static __init int pseries_wdt_init(void) { if (firmware_has_feature(FW_FEATURE_WATCHDOG)) platform_device_register_simple("pseries-wdt", 0, NULL, 0); return 0; } machine_subsys_initcall(pseries, pseries_wdt_init); static void pseries_8259_cascade(struct irq_desc *desc) { struct irq_chip *chip = irq_desc_get_chip(desc); unsigned int cascade_irq = i8259_irq(); if (cascade_irq) generic_handle_irq(cascade_irq); chip->irq_eoi(&desc->irq_data); } static void __init pseries_setup_i8259_cascade(void) { struct device_node *np, *old, *found = NULL; unsigned int cascade; const u32 *addrp; unsigned long intack = 0; int naddr; for_each_node_by_type(np, "interrupt-controller") { if (of_device_is_compatible(np, "chrp,iic")) { found = np; break; } } if (found == NULL) { printk(KERN_DEBUG "pic: no ISA interrupt controller\n"); return; } cascade = irq_of_parse_and_map(found, 0); if (!cascade) { printk(KERN_ERR "pic: failed to map cascade interrupt"); return; } pr_debug("pic: cascade mapped to irq %d\n", cascade); for (old = of_node_get(found); old != NULL ; old = np) { np = of_get_parent(old); of_node_put(old); if (np == NULL) break; if (!of_node_name_eq(np, "pci")) continue; addrp = of_get_property(np, "8259-interrupt-acknowledge", NULL); if (addrp == NULL) continue; naddr = of_n_addr_cells(np); intack = addrp[naddr-1]; if (naddr > 1) intack |= ((unsigned long)addrp[naddr-2]) << 32; } if (intack) printk(KERN_DEBUG "pic: PCI 8259 intack at 0x%016lx\n", intack); i8259_init(found, intack); of_node_put(found); irq_set_chained_handler(cascade, pseries_8259_cascade); } static void __init pseries_init_irq(void) { /* Try using a XIVE if available, otherwise use a XICS */ if (!xive_spapr_init()) { xics_init(); pseries_setup_i8259_cascade(); } } static void pseries_lpar_enable_pmcs(void) { unsigned long set, reset; set = 1UL << 63; reset = 0; plpar_hcall_norets(H_PERFMON, set, reset); } static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *data) { struct of_reconfig_data *rd = data; struct device_node *parent, *np = rd->dn; struct pci_dn *pdn; int err = NOTIFY_OK; switch (action) { case OF_RECONFIG_ATTACH_NODE: parent = of_get_parent(np); pdn = parent ? PCI_DN(parent) : NULL; if (pdn) pci_add_device_node_info(pdn->phb, np); of_node_put(parent); break; case OF_RECONFIG_DETACH_NODE: pdn = PCI_DN(np); if (pdn) list_del(&pdn->list); break; default: err = NOTIFY_DONE; break; } return err; } static struct notifier_block pci_dn_reconfig_nb = { .notifier_call = pci_dn_reconfig_notifier, }; struct kmem_cache *dtl_cache; #ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE /* * Allocate space for the dispatch trace log for all possible cpus * and register the buffers with the hypervisor. This is used for * computing time stolen by the hypervisor. */ static int alloc_dispatch_logs(void) { if (!firmware_has_feature(FW_FEATURE_SPLPAR)) return 0; if (!dtl_cache) return 0; alloc_dtl_buffers(0); /* Register the DTL for the current (boot) cpu */ register_dtl_buffer(smp_processor_id()); return 0; } #else /* !CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */ static inline int alloc_dispatch_logs(void) { return 0; } #endif /* CONFIG_VIRT_CPU_ACCOUNTING_NATIVE */ static int alloc_dispatch_log_kmem_cache(void) { void (*ctor)(void *) = get_dtl_cache_ctor(); dtl_cache = kmem_cache_create("dtl", DISPATCH_LOG_BYTES, DISPATCH_LOG_BYTES, 0, ctor); if (!dtl_cache) { pr_warn("Failed to create dispatch trace log buffer cache\n"); pr_warn("Stolen time statistics will be unreliable\n"); return 0; } return alloc_dispatch_logs(); } machine_early_initcall(pseries, alloc_dispatch_log_kmem_cache); DEFINE_PER_CPU(u64, idle_spurr_cycles); DEFINE_PER_CPU(u64, idle_entry_purr_snap); DEFINE_PER_CPU(u64, idle_entry_spurr_snap); static void pseries_lpar_idle(void) { /* * Default handler to go into low thread priority and possibly * low power mode by ceding processor to hypervisor */ if (!prep_irq_for_idle()) return; /* Indicate to hypervisor that we are idle. */ pseries_idle_prolog(); /* * Yield the processor to the hypervisor. We return if * an external interrupt occurs (which are driven prior * to returning here) or if a prod occurs from another * processor. When returning here, external interrupts * are enabled. */ cede_processor(); pseries_idle_epilog(); } static bool pseries_reloc_on_exception_enabled; bool pseries_reloc_on_exception(void) { return pseries_reloc_on_exception_enabled; } EXPORT_SYMBOL_GPL(pseries_reloc_on_exception); /* * Enable relocation on during exceptions. This has partition wide scope and * may take a while to complete, if it takes longer than one second we will * just give up rather than wasting any more time on this - if that turns out * to ever be a problem in practice we can move this into a kernel thread to * finish off the process later in boot. */ bool pseries_enable_reloc_on_exc(void) { long rc; unsigned int delay, total_delay = 0; while (1) { rc = enable_reloc_on_exceptions(); if (!H_IS_LONG_BUSY(rc)) { if (rc == H_P2) { pr_info("Relocation on exceptions not" " supported\n"); return false; } else if (rc != H_SUCCESS) { pr_warn("Unable to enable relocation" " on exceptions: %ld\n", rc); return false; } pseries_reloc_on_exception_enabled = true; return true; } delay = get_longbusy_msecs(rc); total_delay += delay; if (total_delay > 1000) { pr_warn("Warning: Giving up waiting to enable " "relocation on exceptions (%u msec)!\n", total_delay); return false; } mdelay(delay); } } EXPORT_SYMBOL(pseries_enable_reloc_on_exc); void pseries_disable_reloc_on_exc(void) { long rc; while (1) { rc = disable_reloc_on_exceptions(); if (!H_IS_LONG_BUSY(rc)) break; mdelay(get_longbusy_msecs(rc)); } if (rc == H_SUCCESS) pseries_reloc_on_exception_enabled = false; else pr_warn("Warning: Failed to disable relocation on exceptions: %ld\n", rc); } EXPORT_SYMBOL(pseries_disable_reloc_on_exc); #ifdef __LITTLE_ENDIAN__ void pseries_big_endian_exceptions(void) { long rc; while (1) { rc = enable_big_endian_exceptions(); if (!H_IS_LONG_BUSY(rc)) break; mdelay(get_longbusy_msecs(rc)); } /* * At this point it is unlikely panic() will get anything * out to the user, since this is called very late in kexec * but at least this will stop us from continuing on further * and creating an even more difficult to debug situation. * * There is a known problem when kdump'ing, if cpus are offline * the above call will fail. Rather than panicking again, keep * going and hope the kdump kernel is also little endian, which * it usually is. */ if (rc && !kdump_in_progress()) panic("Could not enable big endian exceptions"); } void __init pseries_little_endian_exceptions(void) { long rc; while (1) { rc = enable_little_endian_exceptions(); if (!H_IS_LONG_BUSY(rc)) break; mdelay(get_longbusy_msecs(rc)); } if (rc) { ppc_md.progress("H_SET_MODE LE exception fail", 0); panic("Could not enable little endian exceptions"); } } #endif static void __init pSeries_discover_phbs(void) { struct device_node *node; struct pci_controller *phb; struct device_node *root = of_find_node_by_path("/"); for_each_child_of_node(root, node) { if (!of_node_is_type(node, "pci") && !of_node_is_type(node, "pciex")) continue; phb = pcibios_alloc_controller(node); if (!phb) continue; rtas_setup_phb(phb); pci_process_bridge_OF_ranges(phb, node, 0); isa_bridge_find_early(phb); phb->controller_ops = pseries_pci_controller_ops; /* create pci_dn's for DT nodes under this PHB */ pci_devs_phb_init_dynamic(phb); pseries_msi_allocate_domains(phb); } of_node_put(root); /* * PCI_PROBE_ONLY and PCI_REASSIGN_ALL_BUS can be set via properties * in chosen. */ of_pci_check_probe_only(); } static void init_cpu_char_feature_flags(struct h_cpu_char_result *result) { /* * The features below are disabled by default, so we instead look to see * if firmware has *enabled* them, and set them if so. */ if (result->character & H_CPU_CHAR_SPEC_BAR_ORI31) security_ftr_set(SEC_FTR_SPEC_BAR_ORI31); if (result->character & H_CPU_CHAR_BCCTRL_SERIALISED) security_ftr_set(SEC_FTR_BCCTRL_SERIALISED); if (result->character & H_CPU_CHAR_L1D_FLUSH_ORI30) security_ftr_set(SEC_FTR_L1D_FLUSH_ORI30); if (result->character & H_CPU_CHAR_L1D_FLUSH_TRIG2) security_ftr_set(SEC_FTR_L1D_FLUSH_TRIG2); if (result->character & H_CPU_CHAR_L1D_THREAD_PRIV) security_ftr_set(SEC_FTR_L1D_THREAD_PRIV); if (result->character & H_CPU_CHAR_COUNT_CACHE_DISABLED) security_ftr_set(SEC_FTR_COUNT_CACHE_DISABLED); if (result->character & H_CPU_CHAR_BCCTR_FLUSH_ASSIST) security_ftr_set(SEC_FTR_BCCTR_FLUSH_ASSIST); if (result->character & H_CPU_CHAR_BCCTR_LINK_FLUSH_ASSIST) security_ftr_set(SEC_FTR_BCCTR_LINK_FLUSH_ASSIST); if (result->behaviour & H_CPU_BEHAV_FLUSH_COUNT_CACHE) security_ftr_set(SEC_FTR_FLUSH_COUNT_CACHE); if (result->behaviour & H_CPU_BEHAV_FLUSH_LINK_STACK) security_ftr_set(SEC_FTR_FLUSH_LINK_STACK); /* * The features below are enabled by default, so we instead look to see * if firmware has *disabled* them, and clear them if so. * H_CPU_BEHAV_FAVOUR_SECURITY_H could be set only if * H_CPU_BEHAV_FAVOUR_SECURITY is. */ if (!(result->behaviour & H_CPU_BEHAV_FAVOUR_SECURITY)) { security_ftr_clear(SEC_FTR_FAVOUR_SECURITY); pseries_security_flavor = 0; } else if (result->behaviour & H_CPU_BEHAV_FAVOUR_SECURITY_H) pseries_security_flavor = 1; else pseries_security_flavor = 2; if (!(result->behaviour & H_CPU_BEHAV_L1D_FLUSH_PR)) security_ftr_clear(SEC_FTR_L1D_FLUSH_PR); if (result->behaviour & H_CPU_BEHAV_NO_L1D_FLUSH_ENTRY) security_ftr_clear(SEC_FTR_L1D_FLUSH_ENTRY); if (result->behaviour & H_CPU_BEHAV_NO_L1D_FLUSH_UACCESS) security_ftr_clear(SEC_FTR_L1D_FLUSH_UACCESS); if (result->behaviour & H_CPU_BEHAV_NO_STF_BARRIER) security_ftr_clear(SEC_FTR_STF_BARRIER); if (!(result->behaviour & H_CPU_BEHAV_BNDS_CHK_SPEC_BAR)) security_ftr_clear(SEC_FTR_BNDS_CHK_SPEC_BAR); } void pseries_setup_security_mitigations(void) { struct h_cpu_char_result result; enum l1d_flush_type types; bool enable; long rc; /* * Set features to the defaults assumed by init_cpu_char_feature_flags() * so it can set/clear again any features that might have changed after * migration, and in case the hypercall fails and it is not even called. */ powerpc_security_features = SEC_FTR_DEFAULT; rc = plpar_get_cpu_characteristics(&result); if (rc == H_SUCCESS) init_cpu_char_feature_flags(&result); /* * We're the guest so this doesn't apply to us, clear it to simplify * handling of it elsewhere. */ security_ftr_clear(SEC_FTR_L1D_FLUSH_HV); types = L1D_FLUSH_FALLBACK; if (security_ftr_enabled(SEC_FTR_L1D_FLUSH_TRIG2)) types |= L1D_FLUSH_MTTRIG; if (security_ftr_enabled(SEC_FTR_L1D_FLUSH_ORI30)) types |= L1D_FLUSH_ORI; enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && \ security_ftr_enabled(SEC_FTR_L1D_FLUSH_PR); setup_rfi_flush(types, enable); setup_count_cache_flush(); enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && security_ftr_enabled(SEC_FTR_L1D_FLUSH_ENTRY); setup_entry_flush(enable); enable = security_ftr_enabled(SEC_FTR_FAVOUR_SECURITY) && security_ftr_enabled(SEC_FTR_L1D_FLUSH_UACCESS); setup_uaccess_flush(enable); setup_stf_barrier(); } #ifdef CONFIG_PCI_IOV enum rtas_iov_fw_value_map { NUM_RES_PROPERTY = 0, /* Number of Resources */ LOW_INT = 1, /* Lowest 32 bits of Address */ START_OF_ENTRIES = 2, /* Always start of entry */ APERTURE_PROPERTY = 2, /* Start of entry+ to Aperture Size */ WDW_SIZE_PROPERTY = 4, /* Start of entry+ to Window Size */ NEXT_ENTRY = 7 /* Go to next entry on array */ }; enum get_iov_fw_value_index { BAR_ADDRS = 1, /* Get Bar Address */ APERTURE_SIZE = 2, /* Get Aperture Size */ WDW_SIZE = 3 /* Get Window Size */ }; static resource_size_t pseries_get_iov_fw_value(struct pci_dev *dev, int resno, enum get_iov_fw_value_index value) { const int *indexes; struct device_node *dn = pci_device_to_OF_node(dev); int i, num_res, ret = 0; indexes = of_get_property(dn, "ibm,open-sriov-vf-bar-info", NULL); if (!indexes) return 0; /* * First element in the array is the number of Bars * returned. Search through the list to find the matching * bar */ num_res = of_read_number(&indexes[NUM_RES_PROPERTY], 1); if (resno >= num_res) return 0; /* or an error */ i = START_OF_ENTRIES + NEXT_ENTRY * resno; switch (value) { case BAR_ADDRS: ret = of_read_number(&indexes[i], 2); break; case APERTURE_SIZE: ret = of_read_number(&indexes[i + APERTURE_PROPERTY], 2); break; case WDW_SIZE: ret = of_read_number(&indexes[i + WDW_SIZE_PROPERTY], 2); break; } return ret; } static void of_pci_set_vf_bar_size(struct pci_dev *dev, const int *indexes) { struct resource *res; resource_size_t base, size; int i, r, num_res; num_res = of_read_number(&indexes[NUM_RES_PROPERTY], 1); num_res = min_t(int, num_res, PCI_SRIOV_NUM_BARS); for (i = START_OF_ENTRIES, r = 0; r < num_res && r < PCI_SRIOV_NUM_BARS; i += NEXT_ENTRY, r++) { res = &dev->resource[r + PCI_IOV_RESOURCES]; base = of_read_number(&indexes[i], 2); size = of_read_number(&indexes[i + APERTURE_PROPERTY], 2); res->flags = pci_parse_of_flags(of_read_number (&indexes[i + LOW_INT], 1), 0); res->flags |= (IORESOURCE_MEM_64 | IORESOURCE_PCI_FIXED); res->name = pci_name(dev); res->start = base; res->end = base + size - 1; } } static void of_pci_parse_iov_addrs(struct pci_dev *dev, const int *indexes) { struct resource *res, *root, *conflict; resource_size_t base, size; int i, r, num_res; /* * First element in the array is the number of Bars * returned. Search through the list to find the matching * bars assign them from firmware into resources structure. */ num_res = of_read_number(&indexes[NUM_RES_PROPERTY], 1); for (i = START_OF_ENTRIES, r = 0; r < num_res && r < PCI_SRIOV_NUM_BARS; i += NEXT_ENTRY, r++) { res = &dev->resource[r + PCI_IOV_RESOURCES]; base = of_read_number(&indexes[i], 2); size = of_read_number(&indexes[i + WDW_SIZE_PROPERTY], 2); res->name = pci_name(dev); res->start = base; res->end = base + size - 1; root = &iomem_resource; dev_dbg(&dev->dev, "pSeries IOV BAR %d: trying firmware assignment %pR\n", r + PCI_IOV_RESOURCES, res); conflict = request_resource_conflict(root, res); if (conflict) { dev_info(&dev->dev, "BAR %d: %pR conflicts with %s %pR\n", r + PCI_IOV_RESOURCES, res, conflict->name, conflict); res->flags |= IORESOURCE_UNSET; } } } static void pseries_disable_sriov_resources(struct pci_dev *pdev) { int i; pci_warn(pdev, "No hypervisor support for SR-IOV on this device, IOV BARs disabled.\n"); for (i = 0; i < PCI_SRIOV_NUM_BARS; i++) pdev->resource[i + PCI_IOV_RESOURCES].flags = 0; } static void pseries_pci_fixup_resources(struct pci_dev *pdev) { const int *indexes; struct device_node *dn = pci_device_to_OF_node(pdev); /*Firmware must support open sriov otherwise dont configure*/ indexes = of_get_property(dn, "ibm,open-sriov-vf-bar-info", NULL); if (indexes) of_pci_set_vf_bar_size(pdev, indexes); else pseries_disable_sriov_resources(pdev); } static void pseries_pci_fixup_iov_resources(struct pci_dev *pdev) { const int *indexes; struct device_node *dn = pci_device_to_OF_node(pdev); if (!pdev->is_physfn) return; /*Firmware must support open sriov otherwise don't configure*/ indexes = of_get_property(dn, "ibm,open-sriov-vf-bar-info", NULL); if (indexes) of_pci_parse_iov_addrs(pdev, indexes); else pseries_disable_sriov_resources(pdev); } static resource_size_t pseries_pci_iov_resource_alignment(struct pci_dev *pdev, int resno) { const __be32 *reg; struct device_node *dn = pci_device_to_OF_node(pdev); /*Firmware must support open sriov otherwise report regular alignment*/ reg = of_get_property(dn, "ibm,is-open-sriov-pf", NULL); if (!reg) return pci_iov_resource_size(pdev, resno); if (!pdev->is_physfn) return 0; return pseries_get_iov_fw_value(pdev, resno - PCI_IOV_RESOURCES, APERTURE_SIZE); } #endif static void __init pSeries_setup_arch(void) { set_arch_panic_timeout(10, ARCH_PANIC_TIMEOUT); /* Discover PIC type and setup ppc_md accordingly */ smp_init_pseries(); if (radix_enabled() && !mmu_has_feature(MMU_FTR_GTSE)) if (!firmware_has_feature(FW_FEATURE_RPT_INVALIDATE)) panic("BUG: Radix support requires either GTSE or RPT_INVALIDATE\n"); /* openpic global configuration register (64-bit format). */ /* openpic Interrupt Source Unit pointer (64-bit format). */ /* python0 facility area (mmio) (64-bit format) REAL address. */ /* init to some ~sane value until calibrate_delay() runs */ loops_per_jiffy = 50000000; fwnmi_init(); pseries_setup_security_mitigations(); if (!radix_enabled()) pseries_lpar_read_hblkrm_characteristics(); /* By default, only probe PCI (can be overridden by rtas_pci) */ pci_add_flags(PCI_PROBE_ONLY); /* Find and initialize PCI host bridges */ init_pci_config_tokens(); of_reconfig_notifier_register(&pci_dn_reconfig_nb); pSeries_nvram_init(); if (firmware_has_feature(FW_FEATURE_LPAR)) { vpa_init(boot_cpuid); if (lppaca_shared_proc(get_lppaca())) { static_branch_enable(&shared_processor); pv_spinlocks_init(); #ifdef CONFIG_PARAVIRT_TIME_ACCOUNTING static_key_slow_inc(¶virt_steal_enabled); if (steal_acc) static_key_slow_inc(¶virt_steal_rq_enabled); #endif } ppc_md.power_save = pseries_lpar_idle; ppc_md.enable_pmcs = pseries_lpar_enable_pmcs; #ifdef CONFIG_PCI_IOV ppc_md.pcibios_fixup_resources = pseries_pci_fixup_resources; ppc_md.pcibios_fixup_sriov = pseries_pci_fixup_iov_resources; ppc_md.pcibios_iov_resource_alignment = pseries_pci_iov_resource_alignment; #endif } else { /* No special idle routine */ ppc_md.enable_pmcs = power4_enable_pmcs; } ppc_md.pcibios_root_bridge_prepare = pseries_root_bridge_prepare; pseries_rng_init(); } static void pseries_panic(char *str) { panic_flush_kmsg_end(); rtas_os_term(str); } static int __init pSeries_init_panel(void) { /* Manually leave the kernel version on the panel. */ #ifdef __BIG_ENDIAN__ ppc_md.progress("Linux ppc64\n", 0); #else ppc_md.progress("Linux ppc64le\n", 0); #endif ppc_md.progress(init_utsname()->version, 0); return 0; } machine_arch_initcall(pseries, pSeries_init_panel); static int pseries_set_dabr(unsigned long dabr, unsigned long dabrx) { return plpar_hcall_norets(H_SET_DABR, dabr); } static int pseries_set_xdabr(unsigned long dabr, unsigned long dabrx) { /* Have to set at least one bit in the DABRX according to PAPR */ if (dabrx == 0 && dabr == 0) dabrx = DABRX_USER; /* PAPR says we can only set kernel and user bits */ dabrx &= DABRX_KERNEL | DABRX_USER; return plpar_hcall_norets(H_SET_XDABR, dabr, dabrx); } static int pseries_set_dawr(int nr, unsigned long dawr, unsigned long dawrx) { /* PAPR says we can't set HYP */ dawrx &= ~DAWRX_HYP; if (nr == 0) return plpar_set_watchpoint0(dawr, dawrx); else return plpar_set_watchpoint1(dawr, dawrx); } #define CMO_CHARACTERISTICS_TOKEN 44 #define CMO_MAXLENGTH 1026 void pSeries_coalesce_init(void) { struct hvcall_mpp_x_data mpp_x_data; if (firmware_has_feature(FW_FEATURE_CMO) && !h_get_mpp_x(&mpp_x_data)) powerpc_firmware_features |= FW_FEATURE_XCMO; else powerpc_firmware_features &= ~FW_FEATURE_XCMO; } /** * fw_cmo_feature_init - FW_FEATURE_CMO is not stored in ibm,hypertas-functions, * handle that here. (Stolen from parse_system_parameter_string) */ static void __init pSeries_cmo_feature_init(void) { static struct papr_sysparm_buf buf __initdata; static_assert(sizeof(buf.val) >= CMO_MAXLENGTH); char *ptr, *key, *value, *end; int page_order = IOMMU_PAGE_SHIFT_4K; pr_debug(" -> fw_cmo_feature_init()\n"); if (papr_sysparm_get(PAPR_SYSPARM_COOP_MEM_OVERCOMMIT_ATTRS, &buf)) { pr_debug("CMO not available\n"); pr_debug(" <- fw_cmo_feature_init()\n"); return; } end = &buf.val[CMO_MAXLENGTH]; ptr = &buf.val[0]; key = value = ptr; while (*ptr && (ptr <= end)) { /* Separate the key and value by replacing '=' with '\0' and * point the value at the string after the '=' */ if (ptr[0] == '=') { ptr[0] = '\0'; value = ptr + 1; } else if (ptr[0] == '\0' || ptr[0] == ',') { /* Terminate the string containing the key/value pair */ ptr[0] = '\0'; if (key == value) { pr_debug("Malformed key/value pair\n"); /* Never found a '=', end processing */ break; } if (0 == strcmp(key, "CMOPageSize")) page_order = simple_strtol(value, NULL, 10); else if (0 == strcmp(key, "PrPSP")) CMO_PrPSP = simple_strtol(value, NULL, 10); else if (0 == strcmp(key, "SecPSP")) CMO_SecPSP = simple_strtol(value, NULL, 10); value = key = ptr + 1; } ptr++; } /* Page size is returned as the power of 2 of the page size, * convert to the page size in bytes before returning */ CMO_PageSize = 1 << page_order; pr_debug("CMO_PageSize = %lu\n", CMO_PageSize); if (CMO_PrPSP != -1 || CMO_SecPSP != -1) { pr_info("CMO enabled\n"); pr_debug("CMO enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP, CMO_SecPSP); powerpc_firmware_features |= FW_FEATURE_CMO; pSeries_coalesce_init(); } else pr_debug("CMO not enabled, PrPSP=%d, SecPSP=%d\n", CMO_PrPSP, CMO_SecPSP); pr_debug(" <- fw_cmo_feature_init()\n"); } static void __init pseries_add_hw_description(void) { struct device_node *dn; const char *s; dn = of_find_node_by_path("/openprom"); if (dn) { if (of_property_read_string(dn, "model", &s) == 0) seq_buf_printf(&ppc_hw_desc, "of:%s ", s); of_node_put(dn); } dn = of_find_node_by_path("/hypervisor"); if (dn) { if (of_property_read_string(dn, "compatible", &s) == 0) seq_buf_printf(&ppc_hw_desc, "hv:%s ", s); of_node_put(dn); return; } if (of_property_read_bool(of_root, "ibm,powervm-partition") || of_property_read_bool(of_root, "ibm,fw-net-version")) seq_buf_printf(&ppc_hw_desc, "hv:phyp "); } /* * Early initialization. Relocation is on but do not reference unbolted pages */ static void __init pseries_init(void) { pr_debug(" -> pseries_init()\n"); pseries_add_hw_description(); #ifdef CONFIG_HVC_CONSOLE if (firmware_has_feature(FW_FEATURE_LPAR)) hvc_vio_init_early(); #endif if (firmware_has_feature(FW_FEATURE_XDABR)) ppc_md.set_dabr = pseries_set_xdabr; else if (firmware_has_feature(FW_FEATURE_DABR)) ppc_md.set_dabr = pseries_set_dabr; if (firmware_has_feature(FW_FEATURE_SET_MODE)) ppc_md.set_dawr = pseries_set_dawr; pSeries_cmo_feature_init(); iommu_init_early_pSeries(); pr_debug(" <- pseries_init()\n"); } /** * pseries_power_off - tell firmware about how to power off the system. * * This function calls either the power-off rtas token in normal cases * or the ibm,power-off-ups token (if present & requested) in case of * a power failure. If power-off token is used, power on will only be * possible with power button press. If ibm,power-off-ups token is used * it will allow auto poweron after power is restored. */ static void pseries_power_off(void) { int rc; int rtas_poweroff_ups_token = rtas_function_token(RTAS_FN_IBM_POWER_OFF_UPS); if (rtas_flash_term_hook) rtas_flash_term_hook(SYS_POWER_OFF); if (rtas_poweron_auto == 0 || rtas_poweroff_ups_token == RTAS_UNKNOWN_SERVICE) { rc = rtas_call(rtas_function_token(RTAS_FN_POWER_OFF), 2, 1, NULL, -1, -1); printk(KERN_INFO "RTAS power-off returned %d\n", rc); } else { rc = rtas_call(rtas_poweroff_ups_token, 0, 1, NULL); printk(KERN_INFO "RTAS ibm,power-off-ups returned %d\n", rc); } for (;;); } static int __init pSeries_probe(void) { if (!of_node_is_type(of_root, "chrp")) return 0; /* Cell blades firmware claims to be chrp while it's not. Until this * is fixed, we need to avoid those here. */ if (of_machine_is_compatible("IBM,CPBW-1.0") || of_machine_is_compatible("IBM,CBEA")) return 0; pm_power_off = pseries_power_off; pr_debug("Machine is%s LPAR !\n", (powerpc_firmware_features & FW_FEATURE_LPAR) ? "" : " not"); pseries_init(); return 1; } static int pSeries_pci_probe_mode(struct pci_bus *bus) { if (firmware_has_feature(FW_FEATURE_LPAR)) return PCI_PROBE_DEVTREE; return PCI_PROBE_NORMAL; } struct pci_controller_ops pseries_pci_controller_ops = { .probe_mode = pSeries_pci_probe_mode, #ifdef CONFIG_SPAPR_TCE_IOMMU .device_group = pSeries_pci_device_group, #endif }; define_machine(pseries) { .name = "pSeries", .probe = pSeries_probe, .setup_arch = pSeries_setup_arch, .init_IRQ = pseries_init_irq, .show_cpuinfo = pSeries_show_cpuinfo, .log_error = pSeries_log_error, .discover_phbs = pSeries_discover_phbs, .pcibios_fixup = pSeries_final_fixup, .restart = rtas_restart, .halt = rtas_halt, .panic = pseries_panic, .get_boot_time = rtas_get_boot_time, .get_rtc_time = rtas_get_rtc_time, .set_rtc_time = rtas_set_rtc_time, .progress = rtas_progress, .system_reset_exception = pSeries_system_reset_exception, .machine_check_early = pseries_machine_check_realmode, .machine_check_exception = pSeries_machine_check_exception, .machine_check_log_err = pSeries_machine_check_log_err, #ifdef CONFIG_KEXEC_CORE .machine_kexec = pseries_machine_kexec, .kexec_cpu_down = pseries_kexec_cpu_down, #endif #ifdef CONFIG_MEMORY_HOTPLUG .memory_block_size = pseries_memory_block_size, #endif };