// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
 */

/dts-v1/;

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/net/ti-dp83867.h>
#include "k3-am642.dtsi"

/ {
	compatible =  "ti,am642-sk", "ti,am642";
	model = "Texas Instruments AM642 SK";

	chosen {
		stdout-path = "serial2:115200n8";
		bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
	};

	memory@80000000 {
		device_type = "memory";
		/* 2G RAM */
		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;

	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		secure_ddr: optee@9e800000 {
			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
			alignment = <0x1000>;
			no-map;
		};
	};

	vusb_main: fixed-regulator-vusb-main5v0 {
		/* USB MAIN INPUT 5V DC */
		compatible = "regulator-fixed";
		regulator-name = "vusb_main5v0";
		regulator-min-microvolt = <5000000>;
		regulator-max-microvolt = <5000000>;
		regulator-always-on;
		regulator-boot-on;
	};

	vcc_3v3_sys: fixedregulator-vcc-3v3-sys {
		/* output of LP8733xx */
		compatible = "regulator-fixed";
		regulator-name = "vcc_3v3_sys";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&vusb_main>;
		regulator-always-on;
		regulator-boot-on;
	};

	vdd_mmc1: fixed-regulator-sd {
		/* TPS2051BD */
		compatible = "regulator-fixed";
		regulator-name = "vdd_mmc1";
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		regulator-boot-on;
		enable-active-high;
		vin-supply = <&vcc_3v3_sys>;
		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
	};
};

&main_pmx0 {
	main_mmc1_pins_default: main-mmc1-pins-default {
		pinctrl-single,pins = <
			AM64X_IOPAD(0x0294, PIN_INPUT, 0) /* (J19) MMC1_CMD */
			AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* (#N/A) MMC1_CLKLB */
			AM64X_IOPAD(0x028c, PIN_INPUT, 0) /* (L20) MMC1_CLK */
			AM64X_IOPAD(0x0288, PIN_INPUT, 0) /* (K21) MMC1_DAT0 */
			AM64X_IOPAD(0x0284, PIN_INPUT, 0) /* (L21) MMC1_DAT1 */
			AM64X_IOPAD(0x0280, PIN_INPUT, 0) /* (K19) MMC1_DAT2 */
			AM64X_IOPAD(0x027c, PIN_INPUT, 0) /* (K18) MMC1_DAT3 */
			AM64X_IOPAD(0x0298, PIN_INPUT, 0) /* (D19) MMC1_SDCD */
		>;
	};

	main_i2c1_pins_default: main-i2c1-pins-default {
		pinctrl-single,pins = <
			AM64X_IOPAD(0x0268, PIN_INPUT_PULLUP, 0) /* (C18) I2C1_SCL */
			AM64X_IOPAD(0x026c, PIN_INPUT_PULLUP, 0) /* (B19) I2C1_SDA */
		>;
	};

	mdio1_pins_default: mdio1-pins-default {
		pinctrl-single,pins = <
			AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */
			AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
		>;
	};

	rgmii1_pins_default: rgmii1-pins-default {
		pinctrl-single,pins = <
			AM64X_IOPAD(0x011c, PIN_INPUT, 4) /* (AA13) PRG1_PRU1_GPO5.RGMII1_RD0 */
			AM64X_IOPAD(0x0128, PIN_INPUT, 4) /* (U12) PRG1_PRU1_GPO8.RGMII1_RD1 */
			AM64X_IOPAD(0x0150, PIN_INPUT, 4) /* (Y13) PRG1_PRU1_GPO18.RGMII1_RD2 */
			AM64X_IOPAD(0x0154, PIN_INPUT, 4) /* (V12) PRG1_PRU1_GPO19.RGMII1_RD3 */
			AM64X_IOPAD(0x00d8, PIN_INPUT, 4) /* (W13) PRG1_PRU0_GPO8.RGMII1_RXC */
			AM64X_IOPAD(0x00cc, PIN_INPUT, 4) /* (V13) PRG1_PRU0_GPO5.RGMII1_RX_CTL */
			AM64X_IOPAD(0x0124, PIN_OUTPUT, 4) /* (V15) PRG1_PRU1_GPO7.RGMII1_TD0 */
			AM64X_IOPAD(0x012c, PIN_OUTPUT, 4) /* (V14) PRG1_PRU1_GPO9.RGMII1_TD1 */
			AM64X_IOPAD(0x0130, PIN_OUTPUT, 4) /* (W14) PRG1_PRU1_GPO10.RGMII1_TD2 */
			AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */
			AM64X_IOPAD(0x00e0, PIN_OUTPUT, 4) /* (U14) PRG1_PRU0_GPO10.RGMII1_TXC */
			AM64X_IOPAD(0x00dc, PIN_OUTPUT, 4) /* (U15) PRG1_PRU0_GPO9.RGMII1_TX_CTL */
		>;
	};

       rgmii2_pins_default: rgmii2-pins-default {
		pinctrl-single,pins = <
			AM64X_IOPAD(0x0108, PIN_INPUT, 4) /* (W11) PRG1_PRU1_GPO0.RGMII2_RD0 */
			AM64X_IOPAD(0x010c, PIN_INPUT, 4) /* (V11) PRG1_PRU1_GPO1.RGMII2_RD1 */
			AM64X_IOPAD(0x0110, PIN_INPUT, 4) /* (AA12) PRG1_PRU1_GPO2.RGMII2_RD2 */
			AM64X_IOPAD(0x0114, PIN_INPUT, 4) /* (Y12) PRG1_PRU1_GPO3.RGMII2_RD3 */
			AM64X_IOPAD(0x0120, PIN_INPUT, 4) /* (U11) PRG1_PRU1_GPO6.RGMII2_RXC */
			AM64X_IOPAD(0x0118, PIN_INPUT, 4) /* (W12) PRG1_PRU1_GPO4.RGMII2_RX_CTL */
			AM64X_IOPAD(0x0134, PIN_OUTPUT, 4) /* (AA10) PRG1_PRU1_GPO11.RGMII2_TD0 */
			AM64X_IOPAD(0x0138, PIN_OUTPUT, 4) /* (V10) PRG1_PRU1_GPO12.RGMII2_TD1 */
			AM64X_IOPAD(0x013c, PIN_OUTPUT, 4) /* (U10) PRG1_PRU1_GPO13.RGMII2_TD2 */
			AM64X_IOPAD(0x0140, PIN_OUTPUT, 4) /* (AA11) PRG1_PRU1_GPO14.RGMII2_TD3 */
			AM64X_IOPAD(0x0148, PIN_OUTPUT, 4) /* (Y10) PRG1_PRU1_GPO16.RGMII2_TXC */
			AM64X_IOPAD(0x0144, PIN_OUTPUT, 4) /* (Y11) PRG1_PRU1_GPO15.RGMII2_TX_CTL */
		>;
	};

	ospi0_pins_default: ospi0-pins-default {
		pinctrl-single,pins = <
			AM64X_IOPAD(0x0000, PIN_OUTPUT, 0) /* (N20) OSPI0_CLK */
			AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */
			AM64X_IOPAD(0x000c, PIN_INPUT, 0) /* (M19) OSPI0_D0 */
			AM64X_IOPAD(0x0010, PIN_INPUT, 0) /* (M18) OSPI0_D1 */
			AM64X_IOPAD(0x0014, PIN_INPUT, 0) /* (M20) OSPI0_D2 */
			AM64X_IOPAD(0x0018, PIN_INPUT, 0) /* (M21) OSPI0_D3 */
			AM64X_IOPAD(0x001c, PIN_INPUT, 0) /* (P21) OSPI0_D4 */
			AM64X_IOPAD(0x0020, PIN_INPUT, 0) /* (P20) OSPI0_D5 */
			AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */
			AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */
			AM64X_IOPAD(0x0008, PIN_INPUT, 0) /* (N19) OSPI0_DQS */
		>;
	};
};

&mcu_uart0 {
	status = "disabled";
};

&mcu_uart1 {
	status = "disabled";
};

&main_uart1 {
	/* main_uart1 is reserved for firmware usage */
	status = "reserved";
};

&main_uart2 {
	status = "disabled";
};

&main_uart3 {
	status = "disabled";
};

&main_uart4 {
	status = "disabled";
};

&main_uart5 {
	status = "disabled";
};

&main_uart6 {
	status = "disabled";
};

&mcu_i2c0 {
	status = "disabled";
};

&mcu_i2c1 {
	status = "disabled";
};

&main_i2c1 {
	pinctrl-names = "default";
	pinctrl-0 = <&main_i2c1_pins_default>;
	clock-frequency = <400000>;

	exp1: gpio@70 {
		compatible = "nxp,pca9538";
		reg = <0x70>;
		gpio-controller;
		#gpio-cells = <2>;
		gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
				  "PRU_DETECT", "MMC1_SD_EN",
				  "VPP_LDO_EN", "RPI_PS_3V3_En",
				  "RPI_PS_5V0_En", "RPI_HAT_DETECT";
	};
};

&main_i2c3 {
	status = "disabled";
};

&mcu_spi0 {
	status = "disabled";
};

&mcu_spi1 {
	status = "disabled";
};

/* mcu_gpio0 is reserved for mcu firmware usage */
&mcu_gpio0 {
	status = "reserved";
};

&sdhci1 {
	/* SD/MMC */
	vmmc-supply = <&vdd_mmc1>;
	pinctrl-names = "default";
	bus-width = <4>;
	pinctrl-0 = <&main_mmc1_pins_default>;
	ti,driver-strength-ohm = <50>;
	disable-wp;
};

&cpsw3g {
	pinctrl-names = "default";
	pinctrl-0 = <&mdio1_pins_default
		     &rgmii1_pins_default
		     &rgmii2_pins_default>;
};

&cpsw_port1 {
	phy-mode = "rgmii-rxid";
	phy-handle = <&cpsw3g_phy0>;
};

&cpsw_port2 {
	phy-mode = "rgmii-rxid";
	phy-handle = <&cpsw3g_phy1>;
};

&cpsw3g_mdio {
	cpsw3g_phy0: ethernet-phy@0 {
		reg = <0>;
		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
	};

	cpsw3g_phy1: ethernet-phy@1 {
		reg = <1>;
		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
	};
};

&tscadc0 {
	status = "disabled";
};

&ospi0 {
	pinctrl-names = "default";
	pinctrl-0 = <&ospi0_pins_default>;

	flash@0{
		compatible = "jedec,spi-nor";
		reg = <0x0>;
		spi-tx-bus-width = <8>;
		spi-rx-bus-width = <8>;
		spi-max-frequency = <25000000>;
		cdns,tshsl-ns = <60>;
		cdns,tsd2d-ns = <60>;
		cdns,tchsh-ns = <60>;
		cdns,tslch-ns = <60>;
		cdns,read-delay = <4>;
		#address-cells = <1>;
		#size-cells = <1>;
	};
};

&mailbox0_cluster2 {
	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
		ti,mbox-rx = <0 0 2>;
		ti,mbox-tx = <1 0 2>;
	};

	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
		ti,mbox-rx = <2 0 2>;
		ti,mbox-tx = <3 0 2>;
	};
};

&mailbox0_cluster3 {
	status = "disabled";
};

&mailbox0_cluster4 {
	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
		ti,mbox-rx = <0 0 2>;
		ti,mbox-tx = <1 0 2>;
	};

	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
		ti,mbox-rx = <2 0 2>;
		ti,mbox-tx = <3 0 2>;
	};
};

&mailbox0_cluster5 {
	status = "disabled";
};

&mailbox0_cluster6 {
	mbox_m4_0: mbox-m4-0 {
		ti,mbox-rx = <0 0 2>;
		ti,mbox-tx = <1 0 2>;
	};
};

&mailbox0_cluster7 {
	status = "disabled";
};