// SPDX-License-Identifier: BSD-3-Clause /* * Copyright (c) 2022, Linaro Limited */ /dts-v1/; #include #include "sm8550.dtsi" #include "pm8010.dtsi" #include "pm8550.dtsi" #include "pm8550b.dtsi" #include "pm8550ve.dtsi" #include "pm8550vs.dtsi" #include "pmk8550.dtsi" #include "pmr735d.dtsi" / { model = "Qualcomm Technologies, Inc. SM8550 MTP"; compatible = "qcom,sm8550-mtp", "qcom,sm8550"; aliases { serial0 = &uart7; }; wcd938x: audio-codec { compatible = "qcom,wcd9385-codec"; pinctrl-names = "default"; pinctrl-0 = <&wcd_default>; qcom,micbias1-microvolt = <1800000>; qcom,micbias2-microvolt = <1800000>; qcom,micbias3-microvolt = <1800000>; qcom,micbias4-microvolt = <1800000>; qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; qcom,mbhc-headset-vthreshold-microvolt = <1700000>; qcom,mbhc-headphone-vthreshold-microvolt = <50000>; qcom,rx-device = <&wcd_rx>; qcom,tx-device = <&wcd_tx>; reset-gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; vdd-buck-supply = <&vreg_l15b_1p8>; vdd-rxtx-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l15b_1p8>; vdd-mic-bias-supply = <&vreg_bob1>; #sound-dai-cells = <1>; }; chosen { stdout-path = "serial0:115200n8"; }; pmic-glink { compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink"; #address-cells = <1>; #size-cells = <0>; connector@0 { compatible = "usb-c-connector"; reg = <0>; power-role = "dual"; data-role = "dual"; ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; pmic_glink_hs_in: endpoint { remote-endpoint = <&usb_1_dwc3_hs>; }; }; port@1 { reg = <1>; pmic_glink_ss_in: endpoint { remote-endpoint = <&usb_1_dwc3_ss>; }; }; }; }; }; sound { compatible = "qcom,sm8550-sndcard", "qcom,sm8450-sndcard"; model = "SM8550-MTP"; audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", "SpkrRight IN", "WSA_SPK2 OUT", "IN1_HPHL", "HPHL_OUT", "IN2_HPHR", "HPHR_OUT", "AMIC2", "MIC BIAS2", "VA DMIC0", "MIC BIAS1", "VA DMIC1", "MIC BIAS1", "VA DMIC2", "MIC BIAS3", "TX DMIC0", "MIC BIAS1", "TX DMIC1", "MIC BIAS2", "TX DMIC2", "MIC BIAS3", "TX SWR_ADC1", "ADC2_OUTPUT"; wcd-playback-dai-link { link-name = "WCD Playback"; cpu { sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; }; codec { sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>; }; platform { sound-dai = <&q6apm>; }; }; wcd-capture-dai-link { link-name = "WCD Capture"; cpu { sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; }; codec { sound-dai = <&wcd938x 1>, <&swr2 0>, <&lpass_txmacro 0>; }; platform { sound-dai = <&q6apm>; }; }; wsa-dai-link { link-name = "WSA Playback"; cpu { sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; }; codec { sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>; }; platform { sound-dai = <&q6apm>; }; }; va-dai-link { link-name = "VA Capture"; cpu { sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; }; codec { sound-dai = <&lpass_vamacro 0>; }; platform { sound-dai = <&q6apm>; }; }; }; vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; regulator-always-on; regulator-boot-on; }; }; &apps_rsc { regulators-0 { compatible = "qcom,pm8550-rpmh-regulators"; qcom,pmic-id = "b"; vdd-bob1-supply = <&vph_pwr>; vdd-bob2-supply = <&vph_pwr>; vdd-l2-l13-l14-supply = <&vreg_bob1>; vdd-l3-supply = <&vreg_s4g_1p3>; vdd-l5-l16-supply = <&vreg_bob1>; vdd-l6-l7-supply = <&vreg_bob1>; vdd-l8-l9-supply = <&vreg_bob1>; vdd-l11-supply = <&vreg_s4g_1p3>; vdd-l12-supply = <&vreg_s6g_1p8>; vdd-l15-supply = <&vreg_s6g_1p8>; vdd-l17-supply = <&vreg_bob2>; vreg_bob1: bob1 { regulator-name = "vreg_bob1"; regulator-min-microvolt = <3296000>; regulator-max-microvolt = <3960000>; regulator-initial-mode = ; }; vreg_bob2: bob2 { regulator-name = "vreg_bob2"; regulator-min-microvolt = <2720000>; regulator-max-microvolt = <3960000>; regulator-initial-mode = ; }; vreg_l1b_1p8: ldo1 { regulator-name = "vreg_l1b_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; }; vreg_l2b_3p0: ldo2 { regulator-name = "vreg_l2b_3p0"; regulator-min-microvolt = <3008000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = ; }; vreg_l5b_3p1: ldo5 { regulator-name = "vreg_l5b_3p1"; regulator-min-microvolt = <3104000>; regulator-max-microvolt = <3104000>; regulator-initial-mode = ; }; vreg_l6b_1p8: ldo6 { regulator-name = "vreg_l6b_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = ; }; vreg_l7b_1p8: ldo7 { regulator-name = "vreg_l7b_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = ; }; vreg_l8b_1p8: ldo8 { regulator-name = "vreg_l8b_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = ; }; vreg_l9b_2p9: ldo9 { regulator-name = "vreg_l9b_2p9"; regulator-min-microvolt = <2960000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = ; }; vreg_l11b_1p2: ldo11 { regulator-name = "vreg_l11b_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1504000>; regulator-initial-mode = ; }; vreg_l12b_1p8: ldo12 { regulator-name = "vreg_l12b_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; }; vreg_l13b_3p0: ldo13 { regulator-name = "vreg_l13b_3p0"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-initial-mode = ; }; vreg_l14b_3p2: ldo14 { regulator-name = "vreg_l14b_3p2"; regulator-min-microvolt = <3200000>; regulator-max-microvolt = <3200000>; regulator-initial-mode = ; }; vreg_l15b_1p8: ldo15 { regulator-name = "vreg_l15b_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = ; }; vreg_l16b_2p8: ldo16 { regulator-name = "vreg_l16b_2p8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-initial-mode = ; }; vreg_l17b_2p5: ldo17 { regulator-name = "vreg_l17b_2p5"; regulator-min-microvolt = <2504000>; regulator-max-microvolt = <2504000>; regulator-initial-mode = ; }; }; regulators-1 { compatible = "qcom,pm8550vs-rpmh-regulators"; qcom,pmic-id = "c"; vdd-l3-supply = <&vreg_s4e_0p9>; vreg_l3c_0p91: ldo3 { regulator-name = "vreg_l3c_0p9"; regulator-min-microvolt = <880000>; regulator-max-microvolt = <912000>; regulator-initial-mode = ; }; }; regulators-2 { compatible = "qcom,pm8550vs-rpmh-regulators"; qcom,pmic-id = "d"; vdd-l1-supply = <&vreg_s4e_0p9>; vreg_l1d_0p88: ldo1 { regulator-name = "vreg_l1d_0p88"; regulator-min-microvolt = <880000>; regulator-max-microvolt = <920000>; regulator-initial-mode = ; }; }; regulators-3 { compatible = "qcom,pm8550vs-rpmh-regulators"; qcom,pmic-id = "e"; vdd-l1-supply = <&vreg_s4e_0p9>; vdd-l2-supply = <&vreg_s4e_0p9>; vdd-l3-supply = <&vreg_s4g_1p3>; vdd-s4-supply = <&vph_pwr>; vdd-s5-supply = <&vph_pwr>; vreg_s4e_0p9: smps4 { regulator-name = "vreg_s4e_0p9"; regulator-min-microvolt = <904000>; regulator-max-microvolt = <984000>; regulator-initial-mode = ; }; vreg_s5e_1p1: smps5 { regulator-name = "vreg_s5e_1p1"; regulator-min-microvolt = <1080000>; regulator-max-microvolt = <1120000>; regulator-initial-mode = ; }; vreg_l1e_0p88: ldo1 { regulator-name = "vreg_l1e_0p88"; regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-initial-mode = ; }; vreg_l2e_0p9: ldo2 { regulator-name = "vreg_l2e_0p9"; regulator-min-microvolt = <904000>; regulator-max-microvolt = <970000>; regulator-initial-mode = ; }; vreg_l3e_1p2: ldo3 { regulator-name = "vreg_l3e_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; }; }; regulators-4 { compatible = "qcom,pm8550ve-rpmh-regulators"; qcom,pmic-id = "f"; vdd-l1-supply = <&vreg_s4e_0p9>; vdd-l2-supply = <&vreg_s4e_0p9>; vdd-l3-supply = <&vreg_s4e_0p9>; vdd-s4-supply = <&vph_pwr>; vreg_s4f_0p5: smps4 { regulator-name = "vreg_s4f_0p5"; regulator-min-microvolt = <500000>; regulator-max-microvolt = <700000>; regulator-initial-mode = ; }; vreg_l1f_0p9: ldo1 { regulator-name = "vreg_l1f_0p9"; regulator-min-microvolt = <912000>; regulator-max-microvolt = <912000>; regulator-initial-mode = ; }; vreg_l2f_0p88: ldo2 { regulator-name = "vreg_l2f_0p88"; regulator-min-microvolt = <880000>; regulator-max-microvolt = <912000>; regulator-initial-mode = ; }; vreg_l3f_0p91: ldo3 { regulator-name = "vreg_l3f_0p91"; regulator-min-microvolt = <880000>; regulator-max-microvolt = <912000>; regulator-initial-mode = ; }; }; regulators-5 { compatible = "qcom,pm8550vs-rpmh-regulators"; qcom,pmic-id = "g"; vdd-l1-supply = <&vreg_s4g_1p3>; vdd-l2-supply = <&vreg_s4g_1p3>; vdd-l3-supply = <&vreg_s4g_1p3>; vdd-s1-supply = <&vph_pwr>; vdd-s2-supply = <&vph_pwr>; vdd-s3-supply = <&vph_pwr>; vdd-s4-supply = <&vph_pwr>; vdd-s5-supply = <&vph_pwr>; vdd-s6-supply = <&vph_pwr>; vreg_s1g_1p2: smps1 { regulator-name = "vreg_s1g_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1300000>; regulator-initial-mode = ; }; vreg_s2g_0p8: smps2 { regulator-name = "vreg_s2g_0p8"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1000000>; regulator-initial-mode = ; }; vreg_s3g_0p7: smps3 { regulator-name = "vreg_s3g_0p7"; regulator-min-microvolt = <300000>; regulator-max-microvolt = <1004000>; regulator-initial-mode = ; }; vreg_s4g_1p3: smps4 { regulator-name = "vreg_s4g_1p3"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1352000>; regulator-initial-mode = ; }; vreg_s5g_0p8: smps5 { regulator-name = "vreg_s5g_0p8"; regulator-min-microvolt = <500000>; regulator-max-microvolt = <1004000>; regulator-initial-mode = ; }; vreg_s6g_1p8: smps6 { regulator-name = "vreg_s6g_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2000000>; regulator-initial-mode = ; }; vreg_l1g_1p2: ldo1 { regulator-name = "vreg_l1g_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; }; vreg_l2g_1p2: ldo2 { regulator-name = "vreg_l2g_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; }; vreg_l3g_1p2: ldo3 { regulator-name = "vreg_l3g_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = ; }; }; }; &lpass_tlmm { spkr_1_sd_n_active: spkr-1-sd-n-active-state { pins = "gpio17"; function = "gpio"; drive-strength = <16>; bias-disable; output-low; }; spkr_2_sd_n_active: spkr-2-sd-n-active-state { pins = "gpio18"; function = "gpio"; drive-strength = <16>; bias-disable; output-low; }; }; &mdss { status = "okay"; }; &mdss_dsi0 { vdda-supply = <&vreg_l3e_1p2>; status = "okay"; panel@0 { compatible = "visionox,vtdr6130"; reg = <0>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sde_dsi_active>, <&sde_te_active>; pinctrl-1 = <&sde_dsi_suspend>, <&sde_te_suspend>; vddio-supply = <&vreg_l12b_1p8>; vci-supply = <&vreg_l13b_3p0>; vdd-supply = <&vreg_l11b_1p2>; reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; port { panel0_in: endpoint { remote-endpoint = <&mdss_dsi0_out>; }; }; }; }; &mdss_dsi0_out { remote-endpoint = <&panel0_in>; data-lanes = <0 1 2 3>; }; &mdss_dsi0_phy { vdds-supply = <&vreg_l1e_0p88>; status = "okay"; }; &pcie_1_phy_aux_clk { clock-frequency = <1000>; }; &pcie0 { wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pcie0_default_state>; status = "okay"; }; &pcie0_phy { vdda-phy-supply = <&vreg_l1e_0p88>; vdda-pll-supply = <&vreg_l3e_1p2>; status = "okay"; }; &pcie1 { wake-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>; perst-gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pcie1_default_state>; status = "okay"; }; &pcie1_phy { vdda-phy-supply = <&vreg_l3c_0p91>; vdda-pll-supply = <&vreg_l3e_1p2>; vdda-qref-supply = <&vreg_l1e_0p88>; status = "okay"; }; &pm8550_gpios { sdc2_card_det_n: sdc2-card-det-state { pins = "gpio12"; function = "normal"; input-enable; output-disable; bias-pull-up; power-source = <1>; /* 1.8 V */ }; }; &pm8550b_eusb2_repeater { vdd18-supply = <&vreg_l15b_1p8>; vdd3-supply = <&vreg_l5b_3p1>; }; &qupv3_id_0 { status = "okay"; }; &remoteproc_adsp { firmware-name = "qcom/sm8550/adsp.mbn", "qcom/sm8550/adsp_dtb.mbn"; status = "okay"; }; &remoteproc_cdsp { firmware-name = "qcom/sm8550/cdsp.mbn", "qcom/sm8550/cdsp_dtb.mbn"; status = "okay"; }; &remoteproc_mpss { firmware-name = "qcom/sm8550/modem.mbn", "qcom/sm8550/modem_dtb.mbn"; status = "okay"; }; &sdhc_2 { cd-gpios = <&pm8550_gpios 12 GPIO_ACTIVE_LOW>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc2_default &sdc2_card_det_n>; pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>; vmmc-supply = <&vreg_l9b_2p9>; vqmmc-supply = <&vreg_l8b_1p8>; bus-width = <4>; no-sdio; no-mmc; status = "okay"; }; &sleep_clk { clock-frequency = <32000>; }; &swr0 { status = "okay"; /* WSA8845 */ left_spkr: speaker@0,0 { compatible = "sdw20217020400"; reg = <0 0>; pinctrl-names = "default"; pinctrl-0 = <&spkr_1_sd_n_active>; powerdown-gpios = <&lpass_tlmm 17 GPIO_ACTIVE_LOW>; #sound-dai-cells = <0>; sound-name-prefix = "SpkrLeft"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l3g_1p2>; }; /* WSA8845 */ right_spkr: speaker@0,1 { compatible = "sdw20217020400"; reg = <0 1>; pinctrl-names = "default"; pinctrl-0 = <&spkr_2_sd_n_active>; powerdown-gpios = <&lpass_tlmm 18 GPIO_ACTIVE_LOW>; #sound-dai-cells = <0>; sound-name-prefix = "SpkrRight"; vdd-1p8-supply = <&vreg_l15b_1p8>; vdd-io-supply = <&vreg_l3g_1p2>; }; }; &swr1 { status = "okay"; /* WCD9385 RX */ wcd_rx: codec@0,4 { compatible = "sdw20217010d00"; reg = <0 4>; qcom,rx-port-mapping = <1 2 3 4 5>; }; }; &swr2 { status = "okay"; /* WCD9385 TX */ wcd_tx: codec@0,3 { compatible = "sdw20217010d00"; reg = <0 3>; qcom,tx-port-mapping = <1 1 2 3>; }; }; &tlmm { gpio-reserved-ranges = <32 8>; sde_dsi_active: sde-dsi-active-state { pins = "gpio133"; function = "gpio"; drive-strength = <8>; bias-disable; }; sde_dsi_suspend: sde-dsi-suspend-state { pins = "gpio133"; function = "gpio"; drive-strength = <2>; bias-pull-down; }; sde_te_active: sde-te-active-state { pins = "gpio86"; function = "mdp_vsync"; drive-strength = <2>; bias-pull-down; }; sde_te_suspend: sde-te-suspend-state { pins = "gpio86"; function = "mdp_vsync"; drive-strength = <2>; bias-pull-down; }; wcd_default: wcd-reset-n-active-state { pins = "gpio108"; function = "gpio"; drive-strength = <16>; bias-disable; output-low; }; }; &uart7 { status = "okay"; }; &ufs_mem_hc { reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; vcc-supply = <&vreg_l17b_2p5>; vcc-max-microamp = <1300000>; vccq-supply = <&vreg_l1g_1p2>; vccq-max-microamp = <1200000>; vccq2-supply = <&vreg_l3g_1p2>; vccq2-max-microamp = <100>; status = "okay"; }; &ufs_mem_phy { vdda-phy-supply = <&vreg_l1d_0p88>; vdda-pll-supply = <&vreg_l3e_1p2>; status = "okay"; }; &usb_1 { status = "okay"; }; &usb_1_dwc3 { dr_mode = "otg"; usb-role-switch; }; &usb_1_dwc3_hs { remote-endpoint = <&pmic_glink_hs_in>; }; &usb_1_dwc3_ss { remote-endpoint = <&pmic_glink_ss_in>; }; &usb_1_hsphy { vdd-supply = <&vreg_l1e_0p88>; vdda12-supply = <&vreg_l3e_1p2>; phys = <&pm8550b_eusb2_repeater>; status = "okay"; }; &usb_dp_qmpphy { vdda-phy-supply = <&vreg_l3e_1p2>; vdda-pll-supply = <&vreg_l3f_0p91>; status = "okay"; }; &xo_board { clock-frequency = <76800000>; };