// SPDX-License-Identifier: BSD-3-Clause /* * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org> */ #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sm8250.dtsi" #include "pm8150.dtsi" #include "pm8150b.dtsi" #include "pm8150l.dtsi" #include "pm8009.dtsi" /delete-node/ &adsp_mem; /delete-node/ &spss_mem; /delete-node/ &cdsp_secure_heap; / { qcom,msm-id = <356 0x20001>; /* SM8250 v2.1 */ qcom,board-id = <0x10008 0>; chosen { #address-cells = <2>; #size-cells = <2>; ranges; framebuffer: framebuffer@9c000000 { compatible = "simple-framebuffer"; reg = <0 0x9c000000 0 0x2300000>; width = <1644>; height = <3840>; stride = <(1644 * 4)>; format = "a8r8g8b8"; /* * That's a lot of clocks, but it's necessary due * to unused clk cleanup & no panel driver yet.. */ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>, <&gcc GCC_DISP_HF_AXI_CLK>, <&gcc GCC_DISP_SF_AXI_CLK>, <&dispcc DISP_CC_MDSS_VSYNC_CLK>, <&dispcc DISP_CC_MDSS_MDP_CLK>, <&dispcc DISP_CC_MDSS_BYTE0_CLK>, <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>, <&dispcc DISP_CC_MDSS_PCLK0_CLK>, <&dispcc DISP_CC_MDSS_ESC0_CLK>; power-domains = <&dispcc MDSS_GDSC>; }; }; gpio_keys: gpio-keys { compatible = "gpio-keys"; /* * Camera focus (light press) and camera snapshot (full press) * seem not to work properly.. Adding the former one stalls the CPU * and the latter kills the volume down key for whatever reason. In any * case, they are both on &pm8150b_gpios: camera focus(2), camera snapshot(1). */ vol-down { label = "Volume Down"; linux,code = <KEY_VOLUMEDOWN>; gpios = <&pm8150_gpios 1 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; gpio-key,wakeup; }; }; vph_pwr: vph-pwr-regulator { compatible = "regulator-fixed"; regulator-name = "vph_pwr"; regulator-min-microvolt = <3700000>; regulator-max-microvolt = <3700000>; }; /* S6c is really ebi.lvl but it's there for supply map completeness sake. */ vreg_s6c_0p88: smpc6-regulator { compatible = "regulator-fixed"; regulator-name = "vreg_s6c_0p88"; regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-always-on; vin-supply = <&vph_pwr>; }; reserved-memory { adsp_mem: memory@8a100000 { reg = <0x0 0x8a100000 0x0 0x2500000>; no-map; }; spss_mem: memory@8c600000 { reg = <0x0 0x8c600000 0x0 0x100000>; no-map; }; cdsp_secure_heap: memory@8c700000 { reg = <0x0 0x8c700000 0x0 0x4600000>; no-map; }; cont_splash_mem: memory@9c000000 { reg = <0x0 0x9c000000 0x0 0x2300000>; no-map; }; ramoops@ffc00000 { compatible = "ramoops"; reg = <0x0 0xffc00000 0x0 0x100000>; record-size = <0x1000>; console-size = <0x40000>; msg-size = <0x20000 0x20000>; ecc-size = <16>; no-map; }; }; }; &adsp { status = "okay"; }; &apps_rsc { pm8150-rpmh-regulators { compatible = "qcom,pm8150-rpmh-regulators"; qcom,pmic-id = "a"; vdd-s1-supply = <&vph_pwr>; vdd-s2-supply = <&vph_pwr>; vdd-s3-supply = <&vph_pwr>; vdd-s4-supply = <&vph_pwr>; vdd-s5-supply = <&vph_pwr>; vdd-s6-supply = <&vph_pwr>; vdd-s7-supply = <&vph_pwr>; vdd-s8-supply = <&vph_pwr>; vdd-s9-supply = <&vph_pwr>; vdd-s10-supply = <&vph_pwr>; vdd-l1-l8-l11-supply = <&vreg_s6c_0p88>; vdd-l2-l10-supply = <&vreg_bob>; vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p6>; vdd-l6-l9-supply = <&vreg_s8c_1p2>; vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>; vdd-l13-l16-l17-supply = <&vreg_bob>; /* (S1+S2+S3) - cx.lvl (ARC) */ vreg_s4a_1p8: smps4 { regulator-name = "vreg_s4a_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1920000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_s5a_1p9: smps5 { regulator-name = "vreg_s5a_1p9"; regulator-min-microvolt = <1824000>; regulator-max-microvolt = <2040000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_s6a_0p6: smps6 { regulator-name = "vreg_s6a_0p6"; regulator-min-microvolt = <600000>; regulator-max-microvolt = <1128000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l2a_3p1: ldo2 { regulator-name = "vreg_l2a_3p1"; regulator-min-microvolt = <3072000>; regulator-max-microvolt = <3072000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l3a_0p9: ldo3 { regulator-name = "vreg_l3a_0p9"; regulator-min-microvolt = <928000>; regulator-max-microvolt = <932000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; /* L4 - lmx.lvl (ARC) */ vreg_l5a_0p88: ldo5 { regulator-name = "vreg_l5a_0p88"; regulator-min-microvolt = <880000>; regulator-max-microvolt = <880000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6a_1p2: ldo6 { regulator-name = "vreg_l6a_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; /* L7 is unused. */ vreg_l9a_1p2: ldo9 { regulator-name = "vreg_l9a_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; /* L10 is unused, L11 - lcx.lvl (ARC) */ vreg_l12a_1p8: ldo12 { regulator-name = "vreg_l12a_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; /* L13 is unused. */ vreg_l14a_1p8: ldo14 { regulator-name = "vreg_l14a_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1880000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; /* L15 & L16 are unused. */ vreg_l17a_3p0: ldo17 { regulator-name = "vreg_l17a_3p0"; regulator-min-microvolt = <2496000>; regulator-max-microvolt = <3008000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l18a_0p9: ldo18 { regulator-name = "vreg_l18a_0p9"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <920000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; }; /* * Remaining regulators that are not yet supported: * OLEDB: 4925000-8100000 * ab: 4600000-6100000 * ibb: 800000-5400000 */ pm8150l-rpmh-regulators { compatible = "qcom,pm8150l-rpmh-regulators"; qcom,pmic-id = "c"; vdd-s1-supply = <&vph_pwr>; vdd-s2-supply = <&vph_pwr>; vdd-s3-supply = <&vph_pwr>; vdd-s4-supply = <&vph_pwr>; vdd-s5-supply = <&vph_pwr>; vdd-s6-supply = <&vph_pwr>; vdd-s7-supply = <&vph_pwr>; vdd-s8-supply = <&vph_pwr>; vdd-l1-l8-supply = <&vreg_s4a_1p8>; vdd-l2-l3-supply = <&vreg_s8c_1p2>; vdd-l4-l5-l6-supply = <&vreg_bob>; vdd-l7-l11-supply = <&vreg_bob>; vdd-l9-l10-supply = <&vreg_bob>; vdd-bob-supply = <&vph_pwr>; vreg_bob: bob { regulator-name = "vreg_bob"; regulator-min-microvolt = <3350000>; regulator-max-microvolt = <3960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; }; /* * S1-S6 are ARCs: * (S1+S2) - gfx.lvl, * S3 - mx.lvl, * (S4+S5) - mmcx.lvl, * S6 - ebi.lvl */ vreg_s7c_0p35: smps7 { regulator-name = "vreg_s7c_0p35"; regulator-min-microvolt = <348000>; regulator-max-microvolt = <1000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_s8c_1p2: smps8 { regulator-name = "vreg_s8c_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1400000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l1c_1p8: ldo1 { regulator-name = "vreg_l1c_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; /* L2-4 are unused. */ vreg_l5c_1p8: ldo5 { regulator-name = "vreg_l5c_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6c_2p9: ldo6 { regulator-name = "vreg_l6c_2p9"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; }; vreg_l7c_2p85: ldo7 { regulator-name = "vreg_l7c_2p85"; regulator-min-microvolt = <2856000>; regulator-max-microvolt = <3104000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l8c_1p8: ldo8 { regulator-name = "vreg_l8c_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l9c_2p9: ldo9 { regulator-name = "vreg_l9c_2p9"; regulator-min-microvolt = <2704000>; regulator-max-microvolt = <2960000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; regulator-allow-set-load; }; vreg_l10c_3p3: ldo10 { regulator-name = "vreg_l10c_3p3"; regulator-min-microvolt = <3296000>; regulator-max-microvolt = <3296000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l11c_3p0: ldo11 { regulator-name = "vreg_l11c_3p0"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; }; pm8009-rpmh-regulators { compatible = "qcom,pm8009-rpmh-regulators"; qcom,pmic-id = "f"; vdd-s1-supply = <&vph_pwr>; vdd-s2-supply = <&vreg_bob>; vdd-l2-supply = <&vreg_s8c_1p2>; vdd-l5-l6-supply = <&vreg_bob>; vdd-l7-supply = <&vreg_s4a_1p8>; vreg_s1f_1p2: smps1 { regulator-name = "vreg_s1f_1p2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_s2f_0p5: smps2 { regulator-name = "vreg_s2f_0p5"; regulator-min-microvolt = <512000>; regulator-max-microvolt = <1100000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; /* L1 is unused. */ vreg_l2f_1p3: ldo2 { regulator-name = "vreg_l2f_1p3"; regulator-min-microvolt = <1304000>; regulator-max-microvolt = <1304000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; /* L3 & L4 are unused. */ vreg_l5f_2p8: ldo5 { regulator-name = "vreg_l5f_2p85"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l6f_2p8: ldo6 { regulator-name = "vreg_l6f_2p8"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; vreg_l7f_1p8: ldo7 { regulator-name = "vreg_l7f_1p8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; }; }; &cdsp { status = "okay"; }; &gpi_dma0 { status = "okay"; }; &gpi_dma1 { status = "okay"; }; &gpi_dma2 { status = "okay"; }; &i2c1 { status = "okay"; clock-frequency = <400000>; /* NXP PN553 NFC @ 28 */ }; &i2c2 { status = "okay"; clock-frequency = <1000000>; /* Dual Cirrus Logic CS35L41 amps @ 40, 41 */ }; &i2c5 { status = "okay"; clock-frequency = <400000>; /* Dialog SLG51000 CMIC @ 75 */ }; &i2c9 { status = "okay"; clock-frequency = <400000>; /* AMS TCS3490 RGB+IR color sensor @ 72 */ }; &i2c13 { status = "okay"; clock-frequency = <400000>; touchscreen@48 { compatible = "samsung,s6sy761"; reg = <0x48>; interrupt-parent = <&tlmm>; interrupts = <39 0x2008>; /* It's "vddio" downstream but it works anyway! */ vdd-supply = <&vreg_l1c_1p8>; avdd-supply = <&vreg_l10c_3p3>; pinctrl-names = "default"; pinctrl-0 = <&ts_int_default>; }; }; &i2c15 { status = "okay"; clock-frequency = <400000>; /* Qcom SMB1390 @ 10 */ /* Silicon Labs SI4704 FM Radio Receiver @ 11 */ /* Qcom SMB1390_slave @ 18 */ /* HALO HL6111R Qi charger @ 25 */ /* Richwave RTC6226 FM Radio Receiver @ 64 */ }; &pcie0 { status = "okay"; }; &pcie0_phy { status = "okay"; vdda-phy-supply = <&vreg_l5a_0p88>; vdda-pll-supply = <&vreg_l9a_1p2>; }; &pcie2 { status = "okay"; pinctrl-0 = <&pcie2_default_state &mdm2ap_default &ap2mdm_default>; }; &pcie2_phy { status = "okay"; vdda-phy-supply = <&vreg_l5a_0p88>; vdda-pll-supply = <&vreg_l9a_1p2>; }; &pon_pwrkey { status = "okay"; }; &pon_resin { status = "okay"; linux,code = <KEY_VOLUMEUP>; }; &qupv3_id_0 { status = "okay"; }; &qupv3_id_1 { status = "okay"; }; &qupv3_id_2 { status = "okay"; }; &sdhc_2 { status = "okay"; cd-gpios = <&tlmm 77 GPIO_ACTIVE_HIGH>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>; pinctrl-1 = <&sdc2_sleep_state &sdc2_card_det_n>; vmmc-supply = <&vreg_l9c_2p9>; vqmmc-supply = <&vreg_l6c_2p9>; bus-width = <4>; no-sdio; no-emmc; }; &slpi { status = "okay"; }; &tlmm { gpio-reserved-ranges = <40 4>, <52 4>; sdc2_default_state: sdc2-default { clk { pins = "sdc2_clk"; drive-strength = <16>; bias-disable; }; cmd { pins = "sdc2_cmd"; drive-strength = <16>; bias-pull-up; }; data { pins = "sdc2_data"; drive-strength = <16>; bias-pull-up; }; }; mdm2ap_default: mdm2ap-default { pins = "gpio1", "gpio3"; function = "gpio"; drive-strength = <8>; bias-disable; }; ts_int_default: ts-int-default { pins = "gpio39"; function = "gpio"; drive-strength = <2>; bias-disabled; input-enable; }; ap2mdm_default: ap2mdm-default { pins = "gpio56", "gpio57"; function = "gpio"; drive-strength = <16>; bias-disable; }; sdc2_card_det_n: sd-card-det-n { pins = "gpio77"; function = "gpio"; bias-pull-up; drive-strength = <2>; }; }; &uart12 { status = "okay"; }; /* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */ &ufs_mem_hc { status = "disabled"; }; &ufs_mem_phy { status = "disabled"; }; &usb_1 { status = "okay"; }; &usb_1_dwc3 { dr_mode = "peripheral"; }; &usb_1_hsphy { status = "okay"; vdda-pll-supply = <&vreg_l5a_0p88>; vdda18-supply = <&vreg_l12a_1p8>; vdda33-supply = <&vreg_l2a_3p1>; }; &usb_1_qmpphy { status = "okay"; vdda-phy-supply = <&vreg_l9a_1p2>; vdda-pll-supply = <&vreg_l18a_0p9>; };