// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) /* * Copyright (c) 2023, Dang Huynh */ /dts-v1/; #include "sm6115.dtsi" #include "pm6125.dtsi" #include / { model = "F(x)tec Pro1X (QX1050)"; compatible = "fxtec,pro1x", "qcom,sm6115"; chassis-type = "handset"; qcom,msm-id = ; chosen { #address-cells = <2>; #size-cells = <2>; ranges; framebuffer0: framebuffer@5c000000 { compatible = "simple-framebuffer"; reg = <0x0 0x5c000000 0x0 (1080 * 2160 * 4)>; width = <1080>; height = <2160>; stride = <(1080 * 4)>; format = "a8r8g8b8"; clocks = <&gcc GCC_DISP_HF_AXI_CLK>; }; }; gpio-keys { compatible = "gpio-keys"; pinctrl-0 = <&vol_up_n>; pinctrl-names = "default"; key-volume-up { label = "Volume Up"; linux,code = ; gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>; debounce-interval = <15>; linux,can-disable; gpio-key,wakeup; }; }; }; &dispcc { /* HACK: disable until a panel driver is ready to retain simplefb */ status = "disabled"; }; &pm6125_gpios { vol_up_n: vol-up-n-state { pins = "gpio5"; function = "normal"; power-source = <0>; bias-pull-up; input-enable; }; }; &pon_pwrkey { status = "okay"; }; &pon_resin { linux,code = ; status = "okay"; }; &rpm_requests { regulators-0 { compatible = "qcom,rpm-pm6125-regulators"; pm6125_s6a: s6 { regulator-min-microvolt = <304000>; regulator-max-microvolt = <1456000>; }; pm6125_s7a: s7 { regulator-min-microvolt = <1280000>; regulator-max-microvolt = <2040000>; }; pm6125_s8a: s8 { regulator-min-microvolt = <1064000>; regulator-max-microvolt = <1304000>; }; pm6125_l1a: l1 { regulator-min-microvolt = <952000>; regulator-max-microvolt = <1152000>; }; pm6125_l4a: l4 { regulator-min-microvolt = <488000>; regulator-max-microvolt = <1000000>; }; pm6125_l5a: l5 { regulator-min-microvolt = <1648000>; regulator-max-microvolt = <3056000>; }; pm6125_l6a: l6 { regulator-min-microvolt = <576000>; regulator-max-microvolt = <656000>; }; pm6125_l7a: l7 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1304000>; }; pm6125_l8a: l8 { regulator-min-microvolt = <400000>; regulator-max-microvolt = <728000>; }; pm6125_l9a: l9 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2000000>; }; pm6125_l10a: l10 { regulator-min-microvolt = <1704000>; regulator-max-microvolt = <1904000>; }; pm6125_l11a: l11 { regulator-min-microvolt = <1704000>; regulator-max-microvolt = <1952000>; regulator-allow-set-load; }; pm6125_l12a: l12 { regulator-min-microvolt = <1624000>; regulator-max-microvolt = <1984000>; }; pm6125_l13a: l13 { regulator-min-microvolt = <1504000>; regulator-max-microvolt = <1952000>; }; pm6125_l14a: l14 { regulator-min-microvolt = <1704000>; regulator-max-microvolt = <1904000>; }; pm6125_l15a: l15 { regulator-min-microvolt = <2920000>; regulator-max-microvolt = <3232000>; }; pm6125_l16a: l16 { regulator-min-microvolt = <1704000>; regulator-max-microvolt = <1904000>; }; pm6125_l17a: l17 { regulator-min-microvolt = <1152000>; regulator-max-microvolt = <1384000>; }; pm6125_l18a: l18 { regulator-min-microvolt = <1104000>; regulator-max-microvolt = <1312000>; }; pm6125_l19a: l19 { regulator-min-microvolt = <1624000>; regulator-max-microvolt = <3304000>; }; pm6125_l20a: l20 { regulator-min-microvolt = <1624000>; regulator-max-microvolt = <3304000>; }; pm6125_l21a: l21 { regulator-min-microvolt = <2400000>; regulator-max-microvolt = <3600000>; }; pm6125_l22a: l22 { regulator-min-microvolt = <2952000>; regulator-max-microvolt = <3304000>; }; pm6125_l23a: l23 { regulator-min-microvolt = <3200000>; regulator-max-microvolt = <3400000>; }; pm6125_l24a: l24 { regulator-min-microvolt = <2704000>; regulator-max-microvolt = <3600000>; regulator-allow-set-load; }; }; }; &sleep_clk { clock-frequency = <32764>; }; &tlmm { gpio-reserved-ranges = <0 4>, <14 4>; }; &ufs_mem_hc { vcc-supply = <&pm6125_l24a>; vcc-max-microamp = <600000>; vccq2-supply = <&pm6125_l11a>; vccq2-max-microamp = <600000>; status = "okay"; }; &ufs_mem_phy { vdda-phy-supply = <&pm6125_l4a>; vdda-pll-supply = <&pm6125_l12a>; vddp-ref-clk-supply = <&pm6125_l18a>; status = "okay"; }; &usb { status = "okay"; }; &usb_dwc3 { maximum-speed = "high-speed"; dr_mode = "peripheral"; }; &usb_hsphy { vdd-supply = <&pm6125_l4a>; vdda-pll-supply = <&pm6125_l12a>; vdda-phy-dpdm-supply = <&pm6125_l15a>; status = "okay"; }; &xo_board { clock-frequency = <19200000>; };