// SPDX-License-Identifier: BSD-3-Clause /* * sc7280 SoC device tree source * * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. */ #include #include #include #include / { interrupt-parent = <&intc>; #address-cells = <2>; #size-cells = <2>; chosen { }; clocks { xo_board: xo-board { compatible = "fixed-clock"; clock-frequency = <76800000>; #clock-cells = <0>; }; sleep_clk: sleep-clk { compatible = "fixed-clock"; clock-frequency = <32000>; #clock-cells = <0>; }; }; reserved-memory { #address-cells = <2>; #size-cells = <2>; ranges; aop_mem: memory@80800000 { reg = <0x0 0x80800000 0x0 0x60000>; no-map; }; aop_cmd_db_mem: memory@80860000 { reg = <0x0 0x80860000 0x0 0x20000>; compatible = "qcom,cmd-db"; no-map; }; cpucp_mem: memory@80b00000 { no-map; reg = <0x0 0x80b00000 0x0 0x100000>; }; }; cpus { #address-cells = <2>; #size-cells = <0>; CPU0: cpu@0 { device_type = "cpu"; compatible = "arm,kryo"; reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&L2_0>; L2_0: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; L3_0: l3-cache { compatible = "cache"; }; }; }; CPU1: cpu@100 { device_type = "cpu"; compatible = "arm,kryo"; reg = <0x0 0x100>; enable-method = "psci"; next-level-cache = <&L2_100>; L2_100: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; }; }; CPU2: cpu@200 { device_type = "cpu"; compatible = "arm,kryo"; reg = <0x0 0x200>; enable-method = "psci"; next-level-cache = <&L2_200>; L2_200: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; }; }; CPU3: cpu@300 { device_type = "cpu"; compatible = "arm,kryo"; reg = <0x0 0x300>; enable-method = "psci"; next-level-cache = <&L2_300>; L2_300: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; }; }; CPU4: cpu@400 { device_type = "cpu"; compatible = "arm,kryo"; reg = <0x0 0x400>; enable-method = "psci"; next-level-cache = <&L2_400>; L2_400: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; }; }; CPU5: cpu@500 { device_type = "cpu"; compatible = "arm,kryo"; reg = <0x0 0x500>; enable-method = "psci"; next-level-cache = <&L2_500>; L2_500: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; }; }; CPU6: cpu@600 { device_type = "cpu"; compatible = "arm,kryo"; reg = <0x0 0x600>; enable-method = "psci"; next-level-cache = <&L2_600>; L2_600: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; }; }; CPU7: cpu@700 { device_type = "cpu"; compatible = "arm,kryo"; reg = <0x0 0x700>; enable-method = "psci"; next-level-cache = <&L2_700>; L2_700: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; }; }; }; memory@80000000 { device_type = "memory"; /* We expect the bootloader to fill in the size */ reg = <0 0x80000000 0 0>; }; firmware { scm { compatible = "qcom,scm-sc7280", "qcom,scm"; }; }; pmu { compatible = "arm,armv8-pmuv3"; interrupts = ; }; psci { compatible = "arm,psci-1.0"; method = "smc"; }; soc: soc@0 { #address-cells = <2>; #size-cells = <2>; ranges = <0 0 0 0 0x10 0>; dma-ranges = <0 0 0 0 0x10 0>; compatible = "simple-bus"; gcc: clock-controller@100000 { compatible = "qcom,gcc-sc7280"; reg = <0 0x00100000 0 0x1f0000>; clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>, <0>, <0>, <0>, <0>, <0>, <0>; clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk", "pcie_0_pipe_clk", "pcie_1_pipe-clk", "ufs_phy_rx_symbol_0_clk", "ufs_phy_rx_symbol_1_clk", "ufs_phy_tx_symbol_0_clk", "usb3_phy_wrapper_gcc_usb30_pipe_clk"; #clock-cells = <1>; #reset-cells = <1>; #power-domain-cells = <1>; }; qupv3_id_0: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x009c0000 0 0x2000>; clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; #address-cells = <2>; #size-cells = <2>; ranges; status = "disabled"; uart5: serial@994000 { compatible = "qcom,geni-debug-uart"; reg = <0 0x00994000 0 0x4000>; clock-names = "se"; clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; pinctrl-names = "default"; pinctrl-0 = <&qup_uart5_default>; interrupts = ; status = "disabled"; }; }; pdc: interrupt-controller@b220000 { compatible = "qcom,sc7280-pdc", "qcom,pdc"; reg = <0 0x0b220000 0 0x30000>; qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>, <55 306 4>, <59 312 3>, <62 374 2>, <64 434 2>, <66 438 3>, <69 86 1>, <70 520 54>, <124 609 31>, <155 63 1>, <156 716 12>; #interrupt-cells = <2>; interrupt-parent = <&intc>; interrupt-controller; }; spmi_bus: spmi@c440000 { compatible = "qcom,spmi-pmic-arb"; reg = <0 0x0c440000 0 0x1100>, <0 0x0c600000 0 0x2000000>, <0 0x0e600000 0 0x100000>, <0 0x0e700000 0 0xa0000>, <0 0x0c40a000 0 0x26000>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; qcom,ee = <0>; qcom,channel = <0>; #address-cells = <1>; #size-cells = <1>; interrupt-controller; #interrupt-cells = <4>; }; tlmm: pinctrl@f100000 { compatible = "qcom,sc7280-pinctrl"; reg = <0 0x0f100000 0 0x300000>; interrupts = ; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&tlmm 0 0 175>; wakeup-parent = <&pdc>; qup_uart5_default: qup-uart5-default { pins = "gpio46", "gpio47"; function = "qup13"; }; }; apps_smmu: iommu@15000000 { compatible = "qcom,sc7280-smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x100000>; #iommu-cells = <2>; #global-interrupts = <1>; dma-coherent; interrupts = , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ; }; intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; #address-cells = <2>; #size-cells = <2>; ranges; #interrupt-cells = <3>; interrupt-controller; reg = <0 0x17a00000 0 0x10000>, /* GICD */ <0 0x17a60000 0 0x100000>; /* GICR * 8 */ interrupts = ; gic-its@17a40000 { compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; reg = <0 0x17a40000 0 0x20000>; status = "disabled"; }; }; watchdog@17c10000 { compatible = "qcom,apss-wdt-sc7280", "qcom,kpss-wdt"; reg = <0 0x17c10000 0 0x1000>; clocks = <&sleep_clk>; interrupts = ; }; timer@17c20000 { #address-cells = <2>; #size-cells = <2>; ranges; compatible = "arm,armv7-timer-mem"; reg = <0 0x17c20000 0 0x1000>; frame@17c21000 { frame-number = <0>; interrupts = , ; reg = <0 0x17c21000 0 0x1000>, <0 0x17c22000 0 0x1000>; }; frame@17c23000 { frame-number = <1>; interrupts = ; reg = <0 0x17c23000 0 0x1000>; status = "disabled"; }; frame@17c25000 { frame-number = <2>; interrupts = ; reg = <0 0x17c25000 0 0x1000>; status = "disabled"; }; frame@17c27000 { frame-number = <3>; interrupts = ; reg = <0 0x17c27000 0 0x1000>; status = "disabled"; }; frame@17c29000 { frame-number = <4>; interrupts = ; reg = <0 0x17c29000 0 0x1000>; status = "disabled"; }; frame@17c2b000 { frame-number = <5>; interrupts = ; reg = <0 0x17c2b000 0 0x1000>; status = "disabled"; }; frame@17c2d000 { frame-number = <6>; interrupts = ; reg = <0 0x17c2d000 0 0x1000>; status = "disabled"; }; }; apps_rsc: rsc@18200000 { compatible = "qcom,rpmh-rsc"; reg = <0 0x18200000 0 0x10000>, <0 0x18210000 0 0x10000>, <0 0x18220000 0 0x10000>; reg-names = "drv-0", "drv-1", "drv-2"; interrupts = , , ; qcom,tcs-offset = <0xd00>; qcom,drv-id = <2>; qcom,tcs-config = , , , ; rpmhcc: clock-controller { compatible = "qcom,sc7280-rpmh-clk"; clocks = <&xo_board>; clock-names = "xo"; #clock-cells = <1>; }; }; }; timer { compatible = "arm,armv8-timer"; interrupts = , , , ; }; };