// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Google Pazquel board device tree source * * Copyright 2021 Google LLC. */ /* This file must be included after sc7180-trogdor.dtsi */ #include <arm/cros-ec-keyboard.dtsi> &ap_sar_sensor { compatible = "semtech,sx9324"; semtech,ph0-pin = <1 3 3>; semtech,ph1-pin = <3 1 3>; semtech,ph2-pin = <1 3 3>; semtech,ph3-pin = <0 0 0>; semtech,ph01-resolution = <1024>; semtech,ph23-resolution = <1024>; semtech,startup-sensor = <1>; semtech,ph01-proxraw-strength = <3>; semtech,ph23-proxraw-strength = <1>; semtech,avg-pos-strength = <128>; semtech,input-analog-gain = <0>; semtech,cs-idle-sleep = "gnd"; /delete-property/ svdd-supply; vdd-supply = <&pp1800_prox>; }; /delete-node/&trackpad; &ap_tp_i2c { status = "okay"; trackpad: trackpad@15 { compatible = "hid-over-i2c"; reg = <0x15>; pinctrl-names = "default"; pinctrl-0 = <&tp_int_odl>; interrupt-parent = <&tlmm>; interrupts = <0 IRQ_TYPE_EDGE_FALLING>; vcc-supply = <&pp3300_fp_tp>; post-power-on-delay-ms = <100>; hid-descr-addr = <0x0001>; wakeup-source; }; }; &keyboard_controller { function-row-physmap = < MATRIX_KEY(0x00, 0x02, 0) /* T1 */ MATRIX_KEY(0x03, 0x02, 0) /* T2 */ MATRIX_KEY(0x02, 0x02, 0) /* T3 */ MATRIX_KEY(0x01, 0x02, 0) /* T4 */ MATRIX_KEY(0x03, 0x04, 0) /* T5 */ MATRIX_KEY(0x02, 0x04, 0) /* T6 */ MATRIX_KEY(0x01, 0x04, 0) /* T7 */ MATRIX_KEY(0x02, 0x09, 0) /* T8 */ MATRIX_KEY(0x01, 0x09, 0) /* T9 */ MATRIX_KEY(0x00, 0x04, 0) /* T10 */ >; linux,keymap = < MATRIX_KEY(0x00, 0x02, KEY_BACK) MATRIX_KEY(0x03, 0x02, KEY_REFRESH) MATRIX_KEY(0x02, 0x02, KEY_ZOOM) MATRIX_KEY(0x01, 0x02, KEY_SCALE) MATRIX_KEY(0x03, 0x04, KEY_SYSRQ) MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSDOWN) MATRIX_KEY(0x01, 0x04, KEY_BRIGHTNESSUP) MATRIX_KEY(0x02, 0x09, KEY_MUTE) MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN) MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP) CROS_STD_MAIN_KEYMAP >; }; &panel { compatible = "edp-panel"; }; &pp3300_dx_edp { gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; }; &en_pp3300_dx_edp { pins = "gpio67"; }; /* PINCTRL - board-specific pinctrl */ &tlmm { gpio-line-names = "TP_INT_ODL", "AP_RAM_ID0", "AP_SKU_ID2", "AP_RAM_ID1", "", "AP_RAM_ID2", "AP_TP_I2C_SDA", "AP_TP_I2C_SCL", "TS_RESET_L", "TS_INT_L", "", "EDP_BRIJ_IRQ", "AP_EDP_BKLTEN", "", "", "EDP_BRIJ_I2C_SDA", "EDP_BRIJ_I2C_SCL", "HUB_RST_L", "", "", "", "", "", "AMP_EN", "P_SENSOR_INT_L", "AP_SAR_SENSOR_SDA", "AP_SAR_SENSOR_SCL", "", "HP_IRQ", "", "", "AP_BRD_ID2", "BRIJ_SUSPEND", "AP_BRD_ID0", "AP_H1_SPI_MISO", "AP_H1_SPI_MOSI", "AP_H1_SPI_CLK", "AP_H1_SPI_CS_L", "", "", "", "", "H1_AP_INT_ODL", "", "UART_AP_TX_DBG_RX", "UART_DBG_TX_AP_RX", "HP_I2C_SDA", "HP_I2C_SCL", "FORCED_USB_BOOT", "AMP_BCLK", "AMP_LRCLK", "AMP_DIN", "", "HP_BCLK", "HP_LRCLK", "HP_DOUT", "HP_DIN", "HP_MCLK", "AP_SKU_ID0", "AP_EC_SPI_MISO", "AP_EC_SPI_MOSI", "AP_EC_SPI_CLK", "AP_EC_SPI_CS_L", "AP_SPI_CLK", "AP_SPI_MOSI", "AP_SPI_MISO", /* * AP_FLASH_WP_L is crossystem ABI. Schematics * call it BIOS_FLASH_WP_L. */ "AP_FLASH_WP_L", "EN_PP3300_DX_EDP", "AP_SPI_CS0_L", "", "", "", "", "", "", "UIM2_DATA", "UIM2_CLK", "UIM2_RST", "UIM2_PRESENT", "UIM1_DATA", "UIM1_CLK", "UIM1_RST", "", "CODEC_PWR_EN", "HUB_EN", "", "", "", "", "", "AP_SKU_ID1", "AP_RST_REQ", "", "AP_BRD_ID1", "AP_EC_INT_L", "", "", "", "", "", "", "", "", "", "EDP_BRIJ_EN", "", "", "", "", "", "", "", "", "", "", "AP_TS_PEN_I2C_SDA", "AP_TS_PEN_I2C_SCL", "DP_HOT_PLUG_DET", "EC_IN_RW_ODL"; };