// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* Copyright 2018 Google LLC. */ #include #include #include #include #include / { thermal-zones { pm8998-thermal { polling-delay-passive = <250>; polling-delay = <1000>; thermal-sensors = <&pm8998_temp>; trips { pm8998_alert0: pm8998-alert0 { temperature = <105000>; hysteresis = <2000>; type = "passive"; }; pm8998_crit: pm8998-crit { temperature = <125000>; hysteresis = <2000>; type = "critical"; }; }; }; }; }; &spmi_bus { pm8998_lsid0: pmic@0 { compatible = "qcom,pm8998", "qcom,spmi-pmic"; reg = <0x0 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; pm8998_pon: pon@800 { compatible = "qcom,pm8998-pon"; reg = <0x800>; mode-bootloader = <0x2>; mode-recovery = <0x1>; pm8998_pwrkey: pwrkey { compatible = "qcom,pm8941-pwrkey"; interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; debounce = <15625>; bias-pull-up; linux,code = ; }; pm8998_resin: resin { compatible = "qcom,pm8941-resin"; interrupts = ; debounce = <15625>; bias-pull-up; status = "disabled"; }; }; pm8998_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; io-channels = <&pm8998_adc ADC5_DIE_TEMP>; io-channel-names = "thermal"; #thermal-sensor-cells = <0>; }; pm8998_coincell: charger@2800 { compatible = "qcom,pm8998-coincell", "qcom,pm8941-coincell"; reg = <0x2800>; status = "disabled"; }; pm8998_adc: adc@3100 { compatible = "qcom,spmi-adc-rev2"; reg = <0x3100>; interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; #size-cells = <0>; #io-channel-cells = <1>; adc-chan@6 { reg = ; label = "die_temp"; }; }; pm8998_adc_tm: adc-tm@3400 { compatible = "qcom,spmi-adc-tm-hc"; reg = <0x3400>; interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>; #thermal-sensor-cells = <1>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; rtc@6000 { compatible = "qcom,pm8941-rtc"; reg = <0x6000>, <0x6100>; reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; pm8998_gpios: gpio@c000 { compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; gpio-ranges = <&pm8998_gpios 0 0 26>; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; }; }; pm8998_lsid1: pmic@1 { compatible = "qcom,pm8998", "qcom,spmi-pmic"; reg = <0x1 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; }; };