// SPDX-License-Identifier: GPL-2.0-or-later /* * at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC * applies to AT91SAM9G45, AT91SAM9M10, * AT91SAM9G46, AT91SAM9M11 SoC * * Copyright (C) 2011 Atmel, * 2011 Nicolas Ferre */ #include #include #include #include #include #include / { #address-cells = <1>; #size-cells = <1>; model = "Atmel AT91SAM9G45 family SoC"; compatible = "atmel,at91sam9g45"; interrupt-parent = <&aic>; aliases { serial0 = &dbgu; serial1 = &usart0; serial2 = &usart1; serial3 = &usart2; serial4 = &usart3; gpio0 = &pioA; gpio1 = &pioB; gpio2 = &pioC; gpio3 = &pioD; gpio4 = &pioE; tcb0 = &tcb0; tcb1 = &tcb1; i2c0 = &i2c0; i2c1 = &i2c1; ssc0 = &ssc0; ssc1 = &ssc1; pwm0 = &pwm0; }; cpus { #address-cells = <1>; #size-cells = <0>; cpu@0 { compatible = "arm,arm926ej-s"; device_type = "cpu"; reg = <0>; }; }; memory@70000000 { device_type = "memory"; reg = <0x70000000 0x10000000>; }; clocks { slow_xtal: slow_xtal { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; }; main_xtal: main_xtal { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <0>; }; adc_op_clk: adc_op_clk{ compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <300000>; }; }; sram: sram@300000 { compatible = "mmio-sram"; reg = <0x00300000 0x10000>; #address-cells = <1>; #size-cells = <1>; ranges = <0 0x00300000 0x10000>; }; ahb { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; apb { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; aic: interrupt-controller@fffff000 { #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; atmel,external-irqs = <31>; }; ramc0: ramc@ffffe400 { compatible = "atmel,at91sam9g45-ddramc"; reg = <0xffffe400 0x200>; clocks = <&pmc PMC_TYPE_SYSTEM 2>; clock-names = "ddrck"; }; ramc1: ramc@ffffe600 { compatible = "atmel,at91sam9g45-ddramc"; reg = <0xffffe600 0x200>; clocks = <&pmc PMC_TYPE_SYSTEM 2>; clock-names = "ddrck"; }; smc: smc@ffffe800 { compatible = "atmel,at91sam9260-smc", "syscon"; reg = <0xffffe800 0x200>; }; matrix: matrix@ffffea00 { compatible = "atmel,at91sam9g45-matrix", "syscon"; reg = <0xffffea00 0x200>; }; pmc: clock-controller@fffffc00 { compatible = "atmel,at91sam9g45-pmc", "syscon"; reg = <0xfffffc00 0x100>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; #clock-cells = <2>; clocks = <&clk32k>, <&main_xtal>; clock-names = "slow_clk", "main_xtal"; }; reset-controller@fffffd00 { compatible = "atmel,at91sam9g45-rstc"; reg = <0xfffffd00 0x10>; clocks = <&clk32k>; }; pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; }; poweroff@fffffd10 { compatible = "atmel,at91sam9rl-shdwc"; reg = <0xfffffd10 0x10>; clocks = <&clk32k>; }; tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; #address-cells = <1>; #size-cells = <0>; reg = <0xfff7c000 0x100>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>; clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; tcb1: timer@fffd4000 { compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; #address-cells = <1>; #size-cells = <0>; reg = <0xfffd4000 0x100>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>; clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk"; }; dma: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 21>; clock-names = "dma_clk"; }; pinctrl@fffff200 { #address-cells = <1>; #size-cells = <1>; compatible = "atmel,at91rm9200-pinctrl", "simple-bus"; ranges = <0xfffff200 0xfffff200 0xa00>; atmel,mux-mask = < /* A B */ 0xffffffff 0xffc003ff /* pioA */ 0xffffffff 0x800f8f00 /* pioB */ 0xffffffff 0x00000e00 /* pioC */ 0xffffffff 0xff0c1381 /* pioD */ 0xffffffff 0x81ffff81 /* pioE */ >; /* shared pinctrl settings */ ac97 { pinctrl_ac97: ac97-0 { atmel,pins = ; /* AC97CK */ }; }; adc0 { pinctrl_adc0_adtrg: adc0_adtrg { atmel,pins = ; }; pinctrl_adc0_ad0: adc0_ad0 { atmel,pins = ; }; pinctrl_adc0_ad1: adc0_ad1 { atmel,pins = ; }; pinctrl_adc0_ad2: adc0_ad2 { atmel,pins = ; }; pinctrl_adc0_ad3: adc0_ad3 { atmel,pins = ; }; pinctrl_adc0_ad4: adc0_ad4 { atmel,pins = ; }; pinctrl_adc0_ad5: adc0_ad5 { atmel,pins = ; }; pinctrl_adc0_ad6: adc0_ad6 { atmel,pins = ; }; pinctrl_adc0_ad7: adc0_ad7 { atmel,pins = ; }; }; dbgu { pinctrl_dbgu: dbgu-0 { atmel,pins = ; }; }; i2c0 { pinctrl_i2c0: i2c0-0 { atmel,pins = ; /* PA20 periph A TWD0 */ }; }; i2c1 { pinctrl_i2c1: i2c1-0 { atmel,pins = ; /* PB10 periph A TWD1 */ }; }; isi { pinctrl_isi_data_0_7: isi-0-data-0-7 { atmel,pins = ; /* HSYNC */ }; pinctrl_isi_data_8_9: isi-0-data-8-9 { atmel,pins = ; /* D9 */ }; pinctrl_isi_data_10_11: isi-0-data-10-11 { atmel,pins = ; /* D11 */ }; }; usart0 { pinctrl_usart0: usart0-0 { atmel,pins = ; }; pinctrl_usart0_rts: usart0_rts-0 { atmel,pins = ; /* PB17 periph B */ }; pinctrl_usart0_cts: usart0_cts-0 { atmel,pins = ; /* PB15 periph B */ }; }; usart1 { pinctrl_usart1: usart1-0 { atmel,pins = ; }; pinctrl_usart1_rts: usart1_rts-0 { atmel,pins = ; /* PD16 periph A */ }; pinctrl_usart1_cts: usart1_cts-0 { atmel,pins = ; /* PD17 periph A */ }; }; usart2 { pinctrl_usart2: usart2-0 { atmel,pins = ; }; pinctrl_usart2_rts: usart2_rts-0 { atmel,pins = ; /* PC9 periph B */ }; pinctrl_usart2_cts: usart2_cts-0 { atmel,pins = ; /* PC11 periph B */ }; }; usart3 { pinctrl_usart3: usart3-0 { atmel,pins = ; }; pinctrl_usart3_rts: usart3_rts-0 { atmel,pins = ; /* PA23 periph B */ }; pinctrl_usart3_cts: usart3_cts-0 { atmel,pins = ; /* PA24 periph B */ }; }; nand { pinctrl_nand_rb: nand-rb-0 { atmel,pins = ; }; pinctrl_nand_cs: nand-cs-0 { atmel,pins = ; }; }; macb { pinctrl_macb_rmii: macb_rmii-0 { atmel,pins = ; /* PA19 periph A */ }; pinctrl_macb_rmii_mii: macb_rmii_mii-0 { atmel,pins = ; /* PA30 periph B */ }; }; mmc0 { pinctrl_mmc0_slot0_clk_cmd_dat0: mmc0_slot0_clk_cmd_dat0-0 { atmel,pins = ; /* PA2 periph A with pullup */ }; pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { atmel,pins = ; /* PA5 periph A with pullup */ }; pinctrl_mmc0_slot0_dat4_7: mmc0_slot0_dat4_7-0 { atmel,pins = ; /* PA9 periph A with pullup */ }; }; mmc1 { pinctrl_mmc1_slot0_clk_cmd_dat0: mmc1_slot0_clk_cmd_dat0-0 { atmel,pins = ; /* PA23 periph A with pullup */ }; pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 { atmel,pins = ; /* PA26 periph A with pullup */ }; pinctrl_mmc1_slot0_dat4_7: mmc1_slot0_dat4_7-0 { atmel,pins = ; /* PA30 periph A with pullup */ }; }; ssc0 { pinctrl_ssc0_tx: ssc0_tx-0 { atmel,pins = ; /* PD2 periph A */ }; pinctrl_ssc0_rx: ssc0_rx-0 { atmel,pins = ; /* PD5 periph A */ }; }; ssc1 { pinctrl_ssc1_tx: ssc1_tx-0 { atmel,pins = ; /* PD12 periph A */ }; pinctrl_ssc1_rx: ssc1_rx-0 { atmel,pins = ; /* PD15 periph A */ }; }; spi0 { pinctrl_spi0: spi0-0 { atmel,pins = ; /* PB2 periph A SPI0_SPCK pin */ }; }; spi1 { pinctrl_spi1: spi1-0 { atmel,pins = ; /* PB16 periph A SPI1_SPCK pin */ }; }; tcb0 { pinctrl_tcb0_tclk0: tcb0_tclk0-0 { atmel,pins = ; }; pinctrl_tcb0_tclk1: tcb0_tclk1-0 { atmel,pins = ; }; pinctrl_tcb0_tclk2: tcb0_tclk2-0 { atmel,pins = ; }; pinctrl_tcb0_tioa0: tcb0_tioa0-0 { atmel,pins = ; }; pinctrl_tcb0_tioa1: tcb0_tioa1-0 { atmel,pins = ; }; pinctrl_tcb0_tioa2: tcb0_tioa2-0 { atmel,pins = ; }; pinctrl_tcb0_tiob0: tcb0_tiob0-0 { atmel,pins = ; }; pinctrl_tcb0_tiob1: tcb0_tiob1-0 { atmel,pins = ; }; pinctrl_tcb0_tiob2: tcb0_tiob2-0 { atmel,pins = ; }; }; tcb1 { pinctrl_tcb1_tclk0: tcb1_tclk0-0 { atmel,pins = ; }; pinctrl_tcb1_tclk1: tcb1_tclk1-0 { atmel,pins = ; }; pinctrl_tcb1_tclk2: tcb1_tclk2-0 { atmel,pins = ; }; pinctrl_tcb1_tioa0: tcb1_tioa0-0 { atmel,pins = ; }; pinctrl_tcb1_tioa1: tcb1_tioa1-0 { atmel,pins = ; }; pinctrl_tcb1_tioa2: tcb1_tioa2-0 { atmel,pins = ; }; pinctrl_tcb1_tiob0: tcb1_tiob0-0 { atmel,pins = ; }; pinctrl_tcb1_tiob1: tcb1_tiob1-0 { atmel,pins = ; }; pinctrl_tcb1_tiob2: tcb1_tiob2-0 { atmel,pins = ; }; }; fb { pinctrl_fb: fb-0 { atmel,pins = ; /* PE30 periph A */ }; }; pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; #interrupt-cells = <2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 2>; }; pioB: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; #interrupt-cells = <2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 3>; }; pioC: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x200>; interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; #interrupt-cells = <2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 4>; }; pioD: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x200>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; #interrupt-cells = <2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; }; pioE: gpio@fffffa00 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x200>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; #interrupt-cells = <2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 5>; }; }; dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"; atmel,usart-mode = ; reg = <0xffffee00 0x200>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; clock-names = "usart"; status = "disabled"; }; usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; atmel,usart-mode = ; interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 7>; clock-names = "usart"; status = "disabled"; }; usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; atmel,usart-mode = ; interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; clocks = <&pmc PMC_TYPE_PERIPHERAL 8>; clock-names = "usart"; status = "disabled"; }; usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; atmel,usart-mode = ; interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 9>; clock-names = "usart"; status = "disabled"; }; usart3: serial@fff98000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff98000 0x200>; atmel,usart-mode = ; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 5>; atmel,use-dma-rx; atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; clocks = <&pmc PMC_TYPE_PERIPHERAL 10>; clock-names = "usart"; status = "disabled"; }; macb0: ethernet@fffbc000 { compatible = "cdns,at91sam9260-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_PERIPHERAL 25>; clock-names = "hclk", "pclk"; status = "disabled"; }; trng@fffcc000 { compatible = "atmel,at91sam9g45-trng"; reg = <0xfffcc000 0x100>; interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 6>; }; i2c0: i2c@fff84000 { compatible = "atmel,at91sam9g10-i2c"; reg = <0xfff84000 0x100>; interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c0>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 12>; status = "disabled"; }; i2c1: i2c@fff88000 { compatible = "atmel,at91sam9g10-i2c"; reg = <0xfff88000 0x100>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 13>; status = "disabled"; }; ssc0: ssc@fff9c000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xfff9c000 0x4000>; interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; clocks = <&pmc PMC_TYPE_PERIPHERAL 16>; clock-names = "pclk"; status = "disabled"; }; ssc1: ssc@fffa0000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xfffa0000 0x4000>; interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; clocks = <&pmc PMC_TYPE_PERIPHERAL 17>; clock-names = "pclk"; status = "disabled"; }; ac97: sound@fffac000 { compatible = "atmel,at91sam9263-ac97c"; reg = <0xfffac000 0x4000>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 4>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ac97>; clocks = <&pmc PMC_TYPE_PERIPHERAL 24>; clock-names = "ac97_clk"; status = "disabled"; }; adc0: adc@fffb0000 { compatible = "atmel,at91sam9g45-adc"; reg = <0xfffb0000 0x100>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&adc_op_clk>; clock-names = "adc_clk", "adc_op_clk"; atmel,adc-channels-used = <0xff>; atmel,adc-vref = <3300>; atmel,adc-startup-time = <40>; }; isi@fffb4000 { compatible = "atmel,at91sam9g45-isi"; reg = <0xfffb4000 0x4000>; interrupts = <26 IRQ_TYPE_LEVEL_HIGH 5>; clocks = <&pmc PMC_TYPE_PERIPHERAL 26>; clock-names = "isi_clk"; status = "disabled"; port { #address-cells = <1>; #size-cells = <0>; }; }; pwm0: pwm@fffb8000 { compatible = "atmel,at91sam9rl-pwm"; reg = <0xfffb8000 0x300>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>; #pwm-cells = <3>; clocks = <&pmc PMC_TYPE_PERIPHERAL 19>; status = "disabled"; }; mmc0: mmc@fff80000 { compatible = "atmel,hsmci"; reg = <0xfff80000 0x600>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 11>; clock-names = "mci_clk"; status = "disabled"; }; mmc1: mmc@fffd0000 { compatible = "atmel,hsmci"; reg = <0xfffd0000 0x600>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>; dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>; dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 29>; clock-names = "mci_clk"; status = "disabled"; }; watchdog@fffffd40 { compatible = "atmel,at91sam9260-wdt"; reg = <0xfffffd40 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&clk32k>; atmel,watchdog-type = "hardware"; atmel,reset-type = "all"; atmel,dbg-halt; status = "disabled"; }; spi0: spi@fffa4000 { #address-cells = <1>; #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xfffa4000 0x200>; interrupts = <14 4 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 14>; clock-names = "spi_clk"; status = "disabled"; }; spi1: spi@fffa8000 { #address-cells = <1>; #size-cells = <0>; compatible = "atmel,at91rm9200-spi"; reg = <0xfffa8000 0x200>; interrupts = <15 4 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; clocks = <&pmc PMC_TYPE_PERIPHERAL 15>; clock-names = "spi_clk"; status = "disabled"; }; usb2: gadget@fff78000 { compatible = "atmel,at91sam9g45-udc"; reg = <0x00600000 0x80000 0xfff78000 0x400>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_CORE PMC_UTMI>; clock-names = "pclk", "hclk"; status = "disabled"; }; clk32k: clock-controller@fffffd50 { compatible = "atmel,at91sam9x5-sckc"; reg = <0xfffffd50 0x4>; clocks = <&slow_xtal>; #clock-cells = <0>; }; rtc@fffffd20 { compatible = "atmel,at91sam9260-rtt"; reg = <0xfffffd20 0x10>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&clk32k>; status = "disabled"; }; rtc@fffffdb0 { compatible = "atmel,at91rm9200-rtc"; reg = <0xfffffdb0 0x30>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; clocks = <&clk32k>; status = "disabled"; }; gpbr: syscon@fffffd60 { compatible = "atmel,at91sam9260-gpbr", "syscon"; reg = <0xfffffd60 0x10>; status = "disabled"; }; }; fb0: fb@500000 { compatible = "atmel,at91sam9g45-lcdc"; reg = <0x00500000 0x1000>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fb>; clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>; clock-names = "hclk", "lcdc_clk"; status = "disabled"; }; usb0: ohci@700000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>; clock-names = "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; usb1: ehci@800000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>; clock-names = "usb_clk", "ehci_clk"; status = "disabled"; }; ebi: ebi@10000000 { compatible = "atmel,at91sam9g45-ebi"; #address-cells = <2>; #size-cells = <1>; atmel,smc = <&smc>; atmel,matrix = <&matrix>; reg = <0x10000000 0x80000000>; ranges = <0x0 0x0 0x10000000 0x10000000 0x1 0x0 0x20000000 0x10000000 0x2 0x0 0x30000000 0x10000000 0x3 0x0 0x40000000 0x10000000 0x4 0x0 0x50000000 0x10000000 0x5 0x0 0x60000000 0x10000000>; clocks = <&pmc PMC_TYPE_CORE PMC_MCK>; status = "disabled"; nand_controller: nand-controller { compatible = "atmel,at91sam9g45-nand-controller"; #address-cells = <2>; #size-cells = <1>; ranges; status = "disabled"; }; }; }; i2c-gpio-0 { compatible = "i2c-gpio"; gpios = <&pioA 20 GPIO_ACTIVE_HIGH /* sda */ &pioA 21 GPIO_ACTIVE_HIGH /* scl */ >; i2c-gpio,sda-open-drain; i2c-gpio,scl-open-drain; i2c-gpio,delay-us = <5>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; };