// SPDX-License-Identifier: GPL-2.0+ /dts-v1/; #include "aspeed-g5.dtsi" #include #include #include #include /{ model = "ASRock E3C256D4I BMC"; compatible = "asrock,e3c256d4i-bmc", "aspeed,ast2500"; aliases { serial4 = &uart5; i2c20 = &i2c2mux0ch0; i2c21 = &i2c2mux0ch1; i2c22 = &i2c2mux0ch2; i2c23 = &i2c2mux0ch3; }; chosen { stdout-path = &uart5; bootargs = "console=tty0 console=ttyS4,115200 earlycon"; }; memory@80000000 { reg = <0x80000000 0x20000000>; }; leds { compatible = "gpio-leds"; heartbeat { gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>; linux,default-trigger = "timer"; }; system-fault { gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>; panic-indicator; }; }; iio-hwmon { compatible = "iio-hwmon"; io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>; }; }; &fmc { status = "okay"; flash@0 { status = "okay"; m25p,fast-read; label = "bmc"; spi-max-frequency = <100000000>; /* 100 MHz */ #include "openbmc-flash-layout-64.dtsi" }; }; &uart1 { status = "okay"; }; &uart2 { status = "okay"; }; &uart3 { status = "okay"; }; &uart4 { status = "okay"; }; &uart5 { status = "okay"; }; &uart_routing { status = "okay"; }; &mac0 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>; nvmem-cells = <ð0_macaddress>; nvmem-cell-names = "mac-address"; }; &i2c0 { status = "okay"; }; &i2c1 { status = "okay"; }; &i2c2 { status = "okay"; i2c-mux@70 { compatible = "nxp,pca9545"; reg = <0x70>; #address-cells = <1>; #size-cells = <0>; i2c2mux0ch0: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; }; i2c2mux0ch1: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; }; i2c2mux0ch2: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; }; i2c2mux0ch3: i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; }; }; }; &i2c3 { status = "okay"; }; &i2c4 { status = "okay"; }; &i2c5 { status = "okay"; }; &i2c6 { status = "okay"; }; &i2c7 { status = "okay"; }; &i2c9 { status = "okay"; }; &i2c10 { status = "okay"; }; &i2c11 { status = "okay"; vrm@60 { compatible = "renesas,isl69269", "isl69269"; reg = <0x60>; }; }; &i2c12 { status = "okay"; /* FRU eeprom */ eeprom@57 { compatible = "st,24c128", "atmel,24c128"; #address-cells = <1>; #size-cells = <1>; reg = <0x57>; pagesize = <16>; eth0_macaddress: macaddress@3f80 { reg = <0x3f80 6>; }; }; }; &video { status = "okay"; }; &vhub { status = "okay"; }; &lpc_ctrl { status = "okay"; }; &lpc_snoop { status = "okay"; snoop-ports = <0x80>; }; &kcs3 { status = "okay"; aspeed,lpc-io-reg = <0xca2>; }; &peci0 { status = "okay"; }; &wdt1 { aspeed,reset-mask = <(AST2500_WDT_RESET_DEFAULT & ~AST2500_WDT_RESET_LPC)>; }; &wdt2 { aspeed,reset-mask = <(AST2500_WDT_RESET_DEFAULT & ~AST2500_WDT_RESET_LPC)>; }; &pwm_tacho { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm0_default /* CPU */ &pinctrl_pwm2_default /* rear */ &pinctrl_pwm4_default>; /* front */ /* CPU */ fan@0 { reg = <0x00>; aspeed,fan-tach-ch = /bits/ 8 <0x00>; }; /* rear */ fan@2 { reg = <0x02>; aspeed,fan-tach-ch = /bits/ 8 <0x02>; }; /* front */ fan@4 { reg = <0x04>; aspeed,fan-tach-ch = /bits/ 8 <0x04>; }; }; &gpio { status = "okay"; gpio-line-names = /* A */ "", "", "NMI_BTN_N", "BMC_NMI", "", "", "", "", /* B */ "", "", "", "", "", "", "", "", /* C */ "", "", "", "", "", "", "", "", /* D */ "BMC_PSIN", "BMC_PSOUT", "BMC_RESETCON", "RESETCON", "", "", "", "", /* E */ "", "", "", "", "", "", "", "", /* F */ "LOCATORLED_STATUS_N", "LOCATORBTN", "", "", "", "", "BMC_PCH_SCI_LPC", "BMC_NCSI_MUX_CTL", /* G */ "HWM_BAT_EN", "CHASSIS_ID0", "CHASSIS_ID1", "CHASSIS_ID2", "", "", "", "", /* H */ "FM_ME_RCVR_N", "O_PWROK", "", "D4_DIMM_EVENT_3V_N", "MFG_MODE_N", "BMC_RTCRST", "BMC_HB_LED_N", "BMC_CASEOPEN", /* I */ "", "", "", "", "", "", "", "", /* J */ "BMC_READY", "BMC_PCH_BIOS_CS_N", "BMC_SMI", "", "", "", "", "", /* K */ "", "", "", "", "", "", "", "", /* L */ "", "", "", "", "", "", "", "", /* M */ "", "", "", "", "", "", "", "", /* N */ "", "", "", "", "", "", "", "", /* O */ "", "", "", "", "", "", "", "", /* P */ "", "", "", "", "", "", "", "", /* Q */ "", "", "", "", "", "", "", "", /* R */ "", "", "", "", "", "", "", "", /* S */ "PCHHOT_BMC_N", "", "RSMRST", "", "", "", "", "", /* T */ "", "", "", "", "", "", "", "", /* U */ "", "", "", "", "", "", "", "", /* V */ "", "", "", "", "", "", "", "", /* W */ "", "", "", "", "", "", "", "", /* X */ "", "", "", "", "", "", "", "", /* Y */ "SLP_S3", "SLP_S5", "", "", "", "", "", "", /* Z */ "CPU_CATERR_BMC_N", "", "SYSTEM_FAULT_LED_N", "BMC_THROTTLE_N", "", "", "", "", /* AA */ "CPU1_THERMTRIP_LATCH_N", "", "CPU1_PROCHOT_N", "", "", "", "IRQ_SMI_ACTIVE_N", "FM_BIOS_POST_CMPLT_N", /* AB */ "", "", "ME_OVERRIDE", "BMC_DMI_MODIFY", "", "", "", "", /* AC */ "", "", "", "", "", "", "", ""; }; &adc { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_adc0_default /* 3VSB */ &pinctrl_adc1_default /* 5VSB */ &pinctrl_adc2_default /* CPU1 */ &pinctrl_adc3_default /* VCCSA */ &pinctrl_adc4_default /* VCCM */ &pinctrl_adc5_default /* V10M */ &pinctrl_adc6_default /* VCCIO */ &pinctrl_adc7_default /* VCCGT */ &pinctrl_adc8_default /* VPPM */ &pinctrl_adc9_default /* BAT */ &pinctrl_adc10_default /* 3V */ &pinctrl_adc11_default /* 5V */ &pinctrl_adc12_default /* 12V */ &pinctrl_adc13_default /* GND */ &pinctrl_adc14_default /* GND */ &pinctrl_adc15_default>; /* GND */ };