# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/pinctrl/brcm,ns-pinmux.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Broadcom Northstar pins mux controller

maintainers:
  - Rafał Miłecki <rafal@milecki.pl>

description:
  Some of Northstar SoCs's pins can be used for various purposes thanks to the
  mux controller. This binding allows describing mux controller and listing
  available functions. They can be referenced later by other bindings to let
  system configure controller correctly.

  A list of pins varies across chipsets so few bindings are available.

properties:
  compatible:
    enum:
      - brcm,bcm4708-pinmux
      - brcm,bcm4709-pinmux
      - brcm,bcm53012-pinmux

  reg:
    maxItems: 1

  reg-names:
    const: cru_gpio_control

patternProperties:
  '-pins$':
    type: object
    description: pin node
    $ref: pinmux-node.yaml#

    properties:
      function:
        enum: [ spi, i2c, pwm, uart1, mdio, uart2, sdio ]
      groups:
        minItems: 1
        maxItems: 4
        items:
          enum: [ spi_grp, i2c_grp, pwm0_grp, pwm1_grp, pwm2_grp, pwm3_grp,
                  uart1_grp, mdio_grp, uart2_grp, sdio_pwr_grp, sdio_1p8v_grp ]

    required:
      - function
      - groups

    additionalProperties: false

allOf:
  - if:
      properties:
        compatible:
          contains:
            const: brcm,bcm4708-pinmux
    then:
      patternProperties:
        '-pins$':
          properties:
            function:
              enum: [ spi, i2c, pwm, uart1 ]
            groups:
              items:
                enum: [ spi_grp, i2c_grp, pwm0_grp, pwm1_grp, pwm2_grp, pwm3_grp,
                        uart1_grp ]

required:
  - reg
  - reg-names

additionalProperties: false

examples:
  - |
    cru@1800c100 {
        compatible = "simple-bus";
        reg = <0x1800c100 0x1a4>;
        ranges;
        #address-cells = <1>;
        #size-cells = <1>;

        pin-controller@1c0 {
            compatible = "brcm,bcm4708-pinmux";
            reg = <0x1c0 0x24>;
            reg-names = "cru_gpio_control";

            spi-pins {
                function = "spi";
                groups = "spi_grp";
            };
        };
    };