# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/pci/snps,dw-pcie.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Synopsys DesignWare PCIe interface

maintainers:
  - Jingoo Han <jingoohan1@gmail.com>
  - Gustavo Pimentel <gustavo.pimentel@synopsys.com>

description: |
  Synopsys DesignWare PCIe host controller

allOf:
  - $ref: /schemas/pci/pci-bus.yaml#

properties:
  compatible:
    anyOf:
      - {}
      - const: snps,dw-pcie

  reg:
    description: |
      It should contain Data Bus Interface (dbi) and config registers for all
      versions.
      For designware core version >= 4.80, it may contain ATU address space.
    minItems: 2
    maxItems: 5

  reg-names:
    minItems: 2
    maxItems: 5
    items:
      enum: [ dbi, dbi2, config, atu, app, elbi, mgmt, ctrl, parf, cfg, link,
              ulreg, smu, mpu, apb, phy ]

  num-lanes:
    description: |
      number of lanes to use (this property should be specified unless
      the link is brought already up in firmware)
    maximum: 16

  reset-gpio:
    description: GPIO pin number of PERST# signal
    maxItems: 1
    deprecated: true

  reset-gpios:
    description: GPIO controlled connection to PERST# signal
    maxItems: 1

  interrupts: true

  interrupt-names: true

  clocks: true

  snps,enable-cdm-check:
    type: boolean
    description: |
      This is a boolean property and if present enables
      automatic checking of CDM (Configuration Dependent Module) registers
      for data corruption. CDM registers include standard PCIe configuration
      space registers, Port Logic registers, DMA and iATU (internal Address
      Translation Unit) registers.

  num-viewport:
    $ref: /schemas/types.yaml#/definitions/uint32
    maximum: 256
    description: |
      number of view ports configured in hardware. If a platform
      does not specify it, the driver autodetects it.
    deprecated: true

additionalProperties: true

required:
  - reg
  - reg-names
  - compatible

examples:
  - |
    bus {
      #address-cells = <1>;
      #size-cells = <1>;
      pcie@dfc00000 {
        device_type = "pci";
        compatible = "snps,dw-pcie";
        reg = <0xdfc00000 0x0001000>, /* IP registers */
              <0xd0000000 0x0002000>; /* Configuration space */
        reg-names = "dbi", "config";
        #address-cells = <3>;
        #size-cells = <2>;
        ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000>,
                 <0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>;
        interrupts = <25>, <24>;
        #interrupt-cells = <1>;
        num-lanes = <1>;
      };
    };