# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/net/ti,k3-am654-cpsw-nuss.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: The TI AM654x/J721E/AM642x SoC Gigabit Ethernet MAC (Media Access Controller) maintainers: - Grygorii Strashko - Sekhar Nori description: The TI AM654x/J721E SoC Gigabit Ethernet MAC (CPSW2G NUSS) has two ports (one external) and provides Ethernet packet communication for the device. The TI AM642x SoC Gigabit Ethernet MAC (CPSW3G NUSS) has three ports (two external) and provides Ethernet packet communication and switching. The internal Communications Port Programming Interface (CPPI5) (Host port 0). Host Port 0 CPPI Packet Streaming Interface interface supports 8 TX channels and one RX channels and operating by NAVSS Unified DMA Peripheral Root Complex (UDMA-P) controller. CPSWxG features updated Address Lookup Engine (ALE). priority level Quality Of Service (QOS) support (802.1p) Support for Audio/Video Bridging (P802.1Qav/D6.0) Support for IEEE 1588 Clock Synchronization (2008 Annex D, Annex E and Annex F) Flow Control (802.3x) Support Time Sensitive Network Support IEEE P902.3br/D2.0 Interspersing Express Traffic IEEE 802.1Qbv/D2.2 Enhancements for Scheduled Traffic Configurable number of addresses plus VLANs Configurable number of classifier/policers VLAN support, 802.1Q compliant, Auto add port VLAN for untagged frames on ingress, Auto VLAN removal on egress and auto pad to minimum frame size. RX/TX csum offload Management Data Input/Output (MDIO) interface for PHYs management RMII/RGMII Interfaces support new version of Common Platform Time Sync (CPTS) The CPSWxG NUSS is integrated into device MCU domain named MCU_CPSW0 on AM654x/J721E SoC. device MAIN domain named CPSW0 on AM642x SoC. Specifications can be found at https://www.ti.com/lit/pdf/spruid7 https://www.ti.com/lit/zip/spruil1 https://www.ti.com/lit/pdf/spruim2 properties: "#address-cells": true "#size-cells": true compatible: enum: - ti,am654-cpsw-nuss - ti,j7200-cpswxg-nuss - ti,j721e-cpsw-nuss - ti,j721e-cpswxg-nuss - ti,am642-cpsw-nuss reg: maxItems: 1 description: The physical base address and size of full the CPSWxG NUSS IO range reg-names: items: - const: cpsw_nuss ranges: true dma-coherent: true clocks: maxItems: 1 description: CPSWxG NUSS functional clock clock-names: items: - const: fck assigned-clock-parents: true assigned-clocks: true power-domains: maxItems: 1 dmas: maxItems: 9 dma-names: items: - const: tx0 - const: tx1 - const: tx2 - const: tx3 - const: tx4 - const: tx5 - const: tx6 - const: tx7 - const: rx ethernet-ports: type: object properties: '#address-cells': const: 1 '#size-cells': const: 0 patternProperties: "^port@[1-8]$": type: object description: CPSWxG NUSS external ports $ref: ethernet-controller.yaml# unevaluatedProperties: false properties: reg: minimum: 1 maximum: 8 description: CPSW port number phys: maxItems: 1 description: phandle on phy-gmii-sel PHY label: description: label associated with this port ti,mac-only: $ref: /schemas/types.yaml#/definitions/flag description: Specifies the port works in mac-only mode. ti,syscon-efuse: $ref: /schemas/types.yaml#/definitions/phandle-array items: - items: - description: Phandle to the system control device node which provides access to efuse - description: offset to efuse registers??? description: Phandle to the system control device node which provides access to efuse IO range with MAC addresses required: - reg - phys additionalProperties: false patternProperties: "^mdio@[0-9a-f]+$": type: object $ref: "ti,davinci-mdio.yaml#" description: CPSW MDIO bus. "^cpts@[0-9a-f]+": type: object $ref: "ti,k3-am654-cpts.yaml#" description: CPSW Common Platform Time Sync (CPTS) module. required: - compatible - reg - reg-names - ranges - clocks - clock-names - power-domains - dmas - dma-names - '#address-cells' - '#size-cells' allOf: - if: not: properties: compatible: contains: const: ti,j721e-cpswxg-nuss then: properties: ethernet-ports: patternProperties: "^port@[5-8]$": false "^port@[1-4]$": properties: reg: minimum: 1 maximum: 4 - if: not: properties: compatible: contains: enum: - ti,j721e-cpswxg-nuss - ti,j7200-cpswxg-nuss then: properties: ethernet-ports: patternProperties: "^port@[3-8]$": false "^port@[1-2]$": properties: reg: minimum: 1 maximum: 2 additionalProperties: false examples: - | #include #include #include #include #include bus { #address-cells = <2>; #size-cells = <2>; mcu_cpsw: ethernet@46000000 { compatible = "ti,am654-cpsw-nuss"; #address-cells = <2>; #size-cells = <2>; reg = <0x0 0x46000000 0x0 0x200000>; reg-names = "cpsw_nuss"; ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>; dma-coherent; clocks = <&k3_clks 5 10>; clock-names = "fck"; power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>; pinctrl-names = "default"; pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>; dmas = <&mcu_udmap 0xf000>, <&mcu_udmap 0xf001>, <&mcu_udmap 0xf002>, <&mcu_udmap 0xf003>, <&mcu_udmap 0xf004>, <&mcu_udmap 0xf005>, <&mcu_udmap 0xf006>, <&mcu_udmap 0xf007>, <&mcu_udmap 0x7000>; dma-names = "tx0", "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7", "rx"; ethernet-ports { #address-cells = <1>; #size-cells = <0>; cpsw_port1: port@1 { reg = <1>; ti,mac-only; label = "port1"; ti,syscon-efuse = <&mcu_conf 0x200>; phys = <&phy_gmii_sel 1>; phy-mode = "rgmii-rxid"; phy-handle = <&phy0>; }; }; davinci_mdio: mdio@f00 { compatible = "ti,cpsw-mdio","ti,davinci_mdio"; reg = <0x0 0xf00 0x0 0x100>; #address-cells = <1>; #size-cells = <0>; clocks = <&k3_clks 5 10>; clock-names = "fck"; bus_freq = <1000000>; phy0: ethernet-phy@0 { reg = <0>; ti,rx-internal-delay = ; ti,fifo-depth = ; }; }; }; cpts@3d000 { compatible = "ti,am65-cpts"; reg = <0x0 0x3d000 0x0 0x400>; clocks = <&k3_clks 18 2>; clock-names = "cpts"; interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "cpts"; ti,cpts-ext-ts-inputs = <4>; ti,cpts-periodic-outputs = <2>; }; };