# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/ata/ahci-platform.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: AHCI SATA Controller

description: |
  SATA nodes are defined to describe on-chip Serial ATA controllers.
  Each SATA controller should have its own node.

  It is possible, but not required, to represent each port as a sub-node.
  It allows to enable each port independently when dealing with multiple
  PHYs.

maintainers:
  - Hans de Goede <hdegoede@redhat.com>
  - Jens Axboe <axboe@kernel.dk>

select:
  properties:
    compatible:
      contains:
        enum:
          - brcm,iproc-ahci
          - cavium,octeon-7130-ahci
          - hisilicon,hisi-ahci
          - ibm,476gtr-ahci
          - marvell,armada-3700-ahci
          - marvell,armada-8k-ahci
          - marvell,berlin2q-ahci
          - snps,dwc-ahci
          - snps,spear-ahci
  required:
    - compatible

allOf:
  - $ref: "sata-common.yaml#"


properties:
  compatible:
    oneOf:
      - items:
          - enum:
              - brcm,iproc-ahci
              - marvell,armada-8k-ahci
              - marvell,berlin2-ahci
              - marvell,berlin2q-ahci
          - const: generic-ahci
      - items:
          - enum:
              - rockchip,rk3568-dwc-ahci
          - const: snps,dwc-ahci
      - enum:
          - cavium,octeon-7130-ahci
          - hisilicon,hisi-ahci
          - ibm,476gtr-ahci
          - marvell,armada-3700-ahci
          - snps,dwc-ahci
          - snps,spear-ahci

  reg:
    minItems: 1
    maxItems: 2

  reg-names:
    maxItems: 1

  clocks:
    description:
      Clock IDs array as required by the controller.
    minItems: 1
    maxItems: 3

  clock-names:
    description:
      Names of clocks corresponding to IDs in the clock property.
    minItems: 1
    maxItems: 3

  interrupts:
    maxItems: 1

  ahci-supply:
    description:
      regulator for AHCI controller

  dma-coherent: true

  phy-supply:
    description:
      regulator for PHY power

  phys:
    description:
      List of all PHYs on this controller
    maxItems: 1

  phy-names:
    description:
      Name specifier for the PHYs
    maxItems: 1

  ports-implemented:
    $ref: '/schemas/types.yaml#/definitions/uint32'
    description: |
      Mask that indicates which ports that the HBA supports
      are available for software to use. Useful if PORTS_IMPL
      is not programmed by the BIOS, which is true with
      some embedded SoCs.
    maximum: 0x1f

  power-domains:
    maxItems: 1

  resets:
    maxItems: 1

  target-supply:
    description:
      regulator for SATA target power

required:
  - compatible
  - reg
  - interrupts

patternProperties:
  "^sata-port@[0-9a-f]+$":
    type: object
    additionalProperties: false
    description:
      Subnode with configuration of the Ports.

    properties:
      reg:
        maxItems: 1

      phys:
        maxItems: 1

      phy-names:
        maxItems: 1

      target-supply:
        description:
          regulator for SATA target power

    required:
      - reg

    anyOf:
      - required: [ phys ]
      - required: [ target-supply ]

unevaluatedProperties: false

examples:
  - |
    sata@ffe08000 {
        compatible = "snps,spear-ahci";
        reg = <0xffe08000 0x1000>;
        interrupts = <115>;
    };
  - |
    #include <dt-bindings/interrupt-controller/arm-gic.h>
    #include <dt-bindings/clock/berlin2q.h>
    sata@f7e90000 {
        compatible = "marvell,berlin2q-ahci", "generic-ahci";
        reg = <0xf7e90000 0x1000>;
        interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
        clocks = <&chip CLKID_SATA>;
        #address-cells = <1>;
        #size-cells = <0>;

        sata0: sata-port@0 {
            reg = <0>;
            phys = <&sata_phy 0>;
            target-supply = <&reg_sata0>;
        };

        sata1: sata-port@1 {
            reg = <1>;
            phys = <&sata_phy 1>;
            target-supply = <&reg_sata1>;
        };
    };