What:		/sys/bus/platform/devices/GGL0001:*/BINF.2
Date:		May 2022
KernelVersion:	5.19
Description:
		This file shows information about the current boot of
		the active EC firmware.
		  * 0 - Read only (recovery) firmware.
		  * 1 - Rewritable firmware.

What:		/sys/bus/platform/devices/GGL0001:*/BINF.3
Date:		May 2022
KernelVersion:	5.19
Description:
		This file shows information about the current boot of
		the active main	firmware type.
		  * 0 - Recovery.
		  * 1 - Normal.
		  * 2 - Developer.
		  * 3 - Netboot (factory installation only).

What:		/sys/bus/platform/devices/GGL0001:*/CHSW
Date:		May 2022
KernelVersion:	5.19
Description:
		This file shows the switch position for the Chrome OS specific
		hardware switches.
		  * 0   - No changes.
		  * 2   - Recovery button was pressed when firmware booted.
		  * 4   - Recovery button was pressed when EC firmware booted.
		  * 32  - Developer switch was enabled when firmware booted.
		  * 512 - Firmware write protection was disabled when firmware
			  booted.

What:		/sys/bus/platform/devices/GGL0001:*/FMAP
Date:		May 2022
KernelVersion:	5.19
Description:
		This file shows the physical memory address of the start of
		the main processor firmware flashmap.

What:		/sys/bus/platform/devices/GGL0001:*/FRID
Date:		May 2022
KernelVersion:	5.19
Description:
		This file shows the firmware version for the read-only portion
		of the main processor firmware.

What:		/sys/bus/platform/devices/GGL0001:*/FWID
Date:		May 2022
KernelVersion:	5.19
Description:
		This file shows the firmware version for the rewritable portion
		of the main processor firmware.

What:		/sys/bus/platform/devices/GGL0001:*/GPIO.X/GPIO.0
Date:		May 2022
KernelVersion:	5.19
Description:
		This file shows the type of the GPIO signal for the Chrome OS
		specific GPIO assignments.
		  * 1   - Recovery button.
		  * 2   - Developer mode switch.
		  * 3   - Firmware write protection switch.
		  * 256 to 511 - Debug header GPIO 0 to GPIO 255.

What:		/sys/bus/platform/devices/GGL0001:*/GPIO.X/GPIO.1
Date:		May 2022
KernelVersion:	5.19
Description:
		This file shows the signal attributes of the GPIO signal.
		  * 0 - Signal is active low.
		  * 1 - Signal is active high.

What:		/sys/bus/platform/devices/GGL0001:*/GPIO.X/GPIO.2
Date:		May 2022
KernelVersion:	5.19
Description:
		This file shows the GPIO number on the specified GPIO
		controller.

What:		/sys/bus/platform/devices/GGL0001:*/GPIO.X/GPIO.3
Date:		May 2022
KernelVersion:	5.19
Description:
		This file shows the name of the GPIO controller.

What:		/sys/bus/platform/devices/GGL0001:*/HWID
Date:		May 2022
KernelVersion:	5.19
Description:
		This file shows the hardware ID for the Chromebook.

What:		/sys/bus/platform/devices/GGL0001:*/MECK
Date:		May 2022
KernelVersion:	5.19
Description:
		This binary file returns the SHA-1 or SHA-256 hash that is
		read out of the Management Engine extended registers during
		boot. The hash is exported vi ACPI so the OS can verify that
		the Management Engine firmware has not changed. If Management
		Engine is not present, or if the firmware was unable to read the
		extended registers, this buffer size can be zero.

What:		/sys/bus/platform/devices/GGL0001:*/VBNV.0
Date:		May 2022
KernelVersion:	5.19
Description:
		This file shows the offset in CMOS bank 0 of the verified boot
		non-volatile storage block, counting from the first writable
		CMOS byte (that is, 'offset = 0' is the byte following the 14
		bytes of clock data).

What:		/sys/bus/platform/devices/GGL0001:*/VBNV.1
Date:		May 2022
KernelVersion:	5.19
Description:
		This file shows the size in bytes of the verified boot
		non-volatile storage block.

What:		/sys/bus/platform/devices/GGL0001:*/VDAT
Date:		May 2022
KernelVersion:	5.19
Description:
		This binary file returns the verified boot data block shared
		between the firmware verification step and the kernel
		verification step.