What: /sys/bus/cxl/flush Date: Januarry, 2022 KernelVersion: v5.18 Contact: linux-cxl@vger.kernel.org Description: (WO) If userspace manually unbinds a port the kernel schedules all descendant memdevs for unbind. Writing '1' to this attribute flushes that work. What: /sys/bus/cxl/devices/memX/firmware_version Date: December, 2020 KernelVersion: v5.12 Contact: linux-cxl@vger.kernel.org Description: (RO) "FW Revision" string as reported by the Identify Memory Device Output Payload in the CXL-2.0 specification. What: /sys/bus/cxl/devices/memX/ram/size Date: December, 2020 KernelVersion: v5.12 Contact: linux-cxl@vger.kernel.org Description: (RO) "Volatile Only Capacity" as bytes. Represents the identically named field in the Identify Memory Device Output Payload in the CXL-2.0 specification. What: /sys/bus/cxl/devices/memX/pmem/size Date: December, 2020 KernelVersion: v5.12 Contact: linux-cxl@vger.kernel.org Description: (RO) "Persistent Only Capacity" as bytes. Represents the identically named field in the Identify Memory Device Output Payload in the CXL-2.0 specification. What: /sys/bus/cxl/devices/memX/serial Date: January, 2022 KernelVersion: v5.18 Contact: linux-cxl@vger.kernel.org Description: (RO) 64-bit serial number per the PCIe Device Serial Number capability. Mandatory for CXL devices, see CXL 2.0 8.1.12.2 Memory Device PCIe Capabilities and Extended Capabilities. What: /sys/bus/cxl/devices/memX/numa_node Date: January, 2022 KernelVersion: v5.18 Contact: linux-cxl@vger.kernel.org Description: (RO) If NUMA is enabled and the platform has affinitized the host PCI device for this memory device, emit the CPU node affinity for this device. What: /sys/bus/cxl/devices/*/devtype Date: June, 2021 KernelVersion: v5.14 Contact: linux-cxl@vger.kernel.org Description: (RO) CXL device objects export the devtype attribute which mirrors the same value communicated in the DEVTYPE environment variable for uevents for devices on the "cxl" bus. What: /sys/bus/cxl/devices/*/modalias Date: December, 2021 KernelVersion: v5.18 Contact: linux-cxl@vger.kernel.org Description: (RO) CXL device objects export the modalias attribute which mirrors the same value communicated in the MODALIAS environment variable for uevents for devices on the "cxl" bus. What: /sys/bus/cxl/devices/portX/uport Date: June, 2021 KernelVersion: v5.14 Contact: linux-cxl@vger.kernel.org Description: (RO) CXL port objects are enumerated from either a platform firmware device (ACPI0017 and ACPI0016) or PCIe switch upstream port with CXL component registers. The 'uport' symlink connects the CXL portX object to the device that published the CXL port capability. What: /sys/bus/cxl/devices/{port,endpoint}X/parent_dport Date: January, 2023 KernelVersion: v6.3 Contact: linux-cxl@vger.kernel.org Description: (RO) CXL port objects are instantiated for each upstream port in a CXL/PCIe switch, and for each endpoint to map the corresponding memory device into the CXL port hierarchy. When a descendant CXL port (switch or endpoint) is enumerated it is useful to know which 'dport' object in the parent CXL port routes to this descendant. The 'parent_dport' symlink points to the device representing the downstream port of a CXL switch that routes to {port,endpoint}X. What: /sys/bus/cxl/devices/portX/dportY Date: June, 2021 KernelVersion: v5.14 Contact: linux-cxl@vger.kernel.org Description: (RO) CXL port objects are enumerated from either a platform firmware device (ACPI0017 and ACPI0016) or PCIe switch upstream port with CXL component registers. The 'dportY' symlink identifies one or more downstream ports that the upstream port may target in its decode of CXL memory resources. The 'Y' integer reflects the hardware port unique-id used in the hardware decoder target list. What: /sys/bus/cxl/devices/decoderX.Y Date: June, 2021 KernelVersion: v5.14 Contact: linux-cxl@vger.kernel.org Description: (RO) CXL decoder objects are enumerated from either a platform firmware description, or a CXL HDM decoder register set in a PCIe device (see CXL 2.0 section 8.2.5.12 CXL HDM Decoder Capability Structure). The 'X' in decoderX.Y represents the cxl_port container of this decoder, and 'Y' represents the instance id of a given decoder resource. What: /sys/bus/cxl/devices/decoderX.Y/{start,size} Date: June, 2021 KernelVersion: v5.14 Contact: linux-cxl@vger.kernel.org Description: (RO) The 'start' and 'size' attributes together convey the physical address base and number of bytes mapped in the decoder's decode window. For decoders of devtype "cxl_decoder_root" the address range is fixed. For decoders of devtype "cxl_decoder_switch" the address is bounded by the decode range of the cxl_port ancestor of the decoder's cxl_port, and dynamically updates based on the active memory regions in that address space. What: /sys/bus/cxl/devices/decoderX.Y/locked Date: June, 2021 KernelVersion: v5.14 Contact: linux-cxl@vger.kernel.org Description: (RO) CXL HDM decoders have the capability to lock the configuration until the next device reset. For decoders of devtype "cxl_decoder_root" there is no standard facility to unlock them. For decoders of devtype "cxl_decoder_switch" a secondary bus reset, of the PCIe bridge that provides the bus for this decoders uport, unlocks / resets the decoder. What: /sys/bus/cxl/devices/decoderX.Y/target_list Date: June, 2021 KernelVersion: v5.14 Contact: linux-cxl@vger.kernel.org Description: (RO) Display a comma separated list of the current decoder target configuration. The list is ordered by the current configured interleave order of the decoder's dport instances. Each entry in the list is a dport id. What: /sys/bus/cxl/devices/decoderX.Y/cap_{pmem,ram,type2,type3} Date: June, 2021 KernelVersion: v5.14 Contact: linux-cxl@vger.kernel.org Description: (RO) When a CXL decoder is of devtype "cxl_decoder_root", it represents a fixed memory window identified by platform firmware. A fixed window may only support a subset of memory types. The 'cap_*' attributes indicate whether persistent memory, volatile memory, accelerator memory, and / or expander memory may be mapped behind this decoder's memory window. What: /sys/bus/cxl/devices/decoderX.Y/target_type Date: June, 2021 KernelVersion: v5.14 Contact: linux-cxl@vger.kernel.org Description: (RO) When a CXL decoder is of devtype "cxl_decoder_switch", it can optionally decode either accelerator memory (type-2) or expander memory (type-3). The 'target_type' attribute indicates the current setting which may dynamically change based on what memory regions are activated in this decode hierarchy. What: /sys/bus/cxl/devices/endpointX/CDAT Date: July, 2022 KernelVersion: v6.0 Contact: linux-cxl@vger.kernel.org Description: (RO) If this sysfs entry is not present no DOE mailbox was found to support CDAT data. If it is present and the length of the data is 0 reading the CDAT data failed. Otherwise the CDAT data is reported. What: /sys/bus/cxl/devices/decoderX.Y/mode Date: May, 2022 KernelVersion: v6.0 Contact: linux-cxl@vger.kernel.org Description: (RW) When a CXL decoder is of devtype "cxl_decoder_endpoint" it translates from a host physical address range, to a device local address range. Device-local address ranges are further split into a 'ram' (volatile memory) range and 'pmem' (persistent memory) range. The 'mode' attribute emits one of 'ram', 'pmem', 'mixed', or 'none'. The 'mixed' indication is for error cases when a decoder straddles the volatile/persistent partition boundary, and 'none' indicates the decoder is not actively decoding, or no DPA allocation policy has been set. 'mode' can be written, when the decoder is in the 'disabled' state, with either 'ram' or 'pmem' to set the boundaries for the next allocation. What: /sys/bus/cxl/devices/decoderX.Y/dpa_resource Date: May, 2022 KernelVersion: v6.0 Contact: linux-cxl@vger.kernel.org Description: (RO) When a CXL decoder is of devtype "cxl_decoder_endpoint", and its 'dpa_size' attribute is non-zero, this attribute indicates the device physical address (DPA) base address of the allocation. What: /sys/bus/cxl/devices/decoderX.Y/dpa_size Date: May, 2022 KernelVersion: v6.0 Contact: linux-cxl@vger.kernel.org Description: (RW) When a CXL decoder is of devtype "cxl_decoder_endpoint" it translates from a host physical address range, to a device local address range. The range, base address plus length in bytes, of DPA allocated to this decoder is conveyed in these 2 attributes. Allocations can be mutated as long as the decoder is in the disabled state. A write to 'dpa_size' releases the previous DPA allocation and then attempts to allocate from the free capacity in the device partition referred to by 'decoderX.Y/mode'. Allocate and free requests can only be performed on the highest instance number disabled decoder with non-zero size. I.e. allocations are enforced to occur in increasing 'decoderX.Y/id' order and frees are enforced to occur in decreasing 'decoderX.Y/id' order. What: /sys/bus/cxl/devices/decoderX.Y/interleave_ways Date: May, 2022 KernelVersion: v6.0 Contact: linux-cxl@vger.kernel.org Description: (RO) The number of targets across which this decoder's host physical address (HPA) memory range is interleaved. The device maps every Nth block of HPA (of size == 'interleave_granularity') to consecutive DPA addresses. The decoder's position in the interleave is determined by the device's (endpoint or switch) switch ancestry. For root decoders their interleave is specified by platform firmware and they only specify a downstream target order for host bridges. What: /sys/bus/cxl/devices/decoderX.Y/interleave_granularity Date: May, 2022 KernelVersion: v6.0 Contact: linux-cxl@vger.kernel.org Description: (RO) The number of consecutive bytes of host physical address space this decoder claims at address N before the decode rotates to the next target in the interleave at address N + interleave_granularity (assuming N is aligned to interleave_granularity). What: /sys/bus/cxl/devices/decoderX.Y/create_pmem_region Date: May, 2022 KernelVersion: v6.0 Contact: linux-cxl@vger.kernel.org Description: (RW) Write a string in the form 'regionZ' to start the process of defining a new persistent memory region (interleave-set) within the decode range bounded by root decoder 'decoderX.Y'. The value written must match the current value returned from reading this attribute. An atomic compare exchange operation is done on write to assign the requested id to a region and allocate the region-id for the next creation attempt. EBUSY is returned if the region name written does not match the current cached value. What: /sys/bus/cxl/devices/decoderX.Y/delete_region Date: May, 2022 KernelVersion: v6.0 Contact: linux-cxl@vger.kernel.org Description: (WO) Write a string in the form 'regionZ' to delete that region, provided it is currently idle / not bound to a driver. What: /sys/bus/cxl/devices/regionZ/uuid Date: May, 2022 KernelVersion: v6.0 Contact: linux-cxl@vger.kernel.org Description: (RW) Write a unique identifier for the region. This field must be set for persistent regions and it must not conflict with the UUID of another region. What: /sys/bus/cxl/devices/regionZ/interleave_granularity Date: May, 2022 KernelVersion: v6.0 Contact: linux-cxl@vger.kernel.org Description: (RW) Set the number of consecutive bytes each device in the interleave set will claim. The possible interleave granularity values are determined by the CXL spec and the participating devices. What: /sys/bus/cxl/devices/regionZ/interleave_ways Date: May, 2022 KernelVersion: v6.0 Contact: linux-cxl@vger.kernel.org Description: (RW) Configures the number of devices participating in the region is set by writing this value. Each device will provide 1/interleave_ways of storage for the region. What: /sys/bus/cxl/devices/regionZ/size Date: May, 2022 KernelVersion: v6.0 Contact: linux-cxl@vger.kernel.org Description: (RW) System physical address space to be consumed by the region. When written trigger the driver to allocate space out of the parent root decoder's address space. When read the size of the address space is reported and should match the span of the region's resource attribute. Size shall be set after the interleave configuration parameters. Once set it cannot be changed, only freed by writing 0. The kernel makes no guarantees that data is maintained over an address space freeing event, and there is no guarantee that a free followed by an allocate results in the same address being allocated. What: /sys/bus/cxl/devices/regionZ/mode Date: January, 2023 KernelVersion: v6.3 Contact: linux-cxl@vger.kernel.org Description: (RO) The mode of a region is established at region creation time and dictates the mode of the endpoint decoder that comprise the region. For more details on the possible modes see /sys/bus/cxl/devices/decoderX.Y/mode What: /sys/bus/cxl/devices/regionZ/resource Date: May, 2022 KernelVersion: v6.0 Contact: linux-cxl@vger.kernel.org Description: (RO) A region is a contiguous partition of a CXL root decoder address space. Region capacity is allocated by writing to the size attribute, the resulting physical address space determined by the driver is reflected here. It is therefore not useful to read this before writing a value to the size attribute. What: /sys/bus/cxl/devices/regionZ/target[0..N] Date: May, 2022 KernelVersion: v6.0 Contact: linux-cxl@vger.kernel.org Description: (RW) Write an endpoint decoder object name to 'targetX' where X is the intended position of the endpoint device in the region interleave and N is the 'interleave_ways' setting for the region. ENXIO is returned if the write results in an impossible to map decode scenario, like the endpoint is unreachable at that position relative to the root decoder interleave. EBUSY is returned if the position in the region is already occupied, or if the region is not in a state to accept interleave configuration changes. EINVAL is returned if the object name is not an endpoint decoder. Once all positions have been successfully written a final validation for decode conflicts is performed before activating the region. What: /sys/bus/cxl/devices/regionZ/commit Date: May, 2022 KernelVersion: v6.0 Contact: linux-cxl@vger.kernel.org Description: (RW) Write a boolean 'true' string value to this attribute to trigger the region to transition from the software programmed state to the actively decoding in hardware state. The commit operation in addition to validating that the region is in proper configured state, validates that the decoders are being committed in spec mandated order (last committed decoder id + 1), and checks that the hardware accepts the commit request. Reading this value indicates whether the region is committed or not.