What: /sys/block//alignment_offset Date: April 2009 Contact: Martin K. Petersen Description: Storage devices may report a physical block size that is bigger than the logical block size (for instance a drive with 4KB physical sectors exposing 512-byte logical blocks to the operating system). This parameter indicates how many bytes the beginning of the device is offset from the disk's natural alignment. What: /sys/block//discard_alignment Date: May 2011 Contact: Martin K. Petersen Description: Devices that support discard functionality may internally allocate space in units that are bigger than the exported logical block size. The discard_alignment parameter indicates how many bytes the beginning of the device is offset from the internal allocation unit's natural alignment. What: /sys/block//diskseq Date: February 2021 Contact: Matteo Croce Description: The /sys/block//diskseq files reports the disk sequence number, which is a monotonically increasing number assigned to every drive. Some devices, like the loop device, refresh such number every time the backing file is changed. The value type is 64 bit unsigned. What: /sys/block//inflight Date: October 2009 Contact: Jens Axboe , Nikanth Karthikesan Description: Reports the number of I/O requests currently in progress (pending / in flight) in a device driver. This can be less than the number of requests queued in the block device queue. The report contains 2 fields: one for read requests and one for write requests. The value type is unsigned int. Cf. Documentation/block/stat.rst which contains a single value for requests in flight. This is related to /sys/block//queue/nr_requests and for SCSI device also its queue_depth. What: /sys/block//integrity/device_is_integrity_capable Date: July 2014 Contact: Martin K. Petersen Description: Indicates whether a storage device is capable of storing integrity metadata. Set if the device is T10 PI-capable. What: /sys/block//integrity/format Date: June 2008 Contact: Martin K. Petersen Description: Metadata format for integrity capable block device. E.g. T10-DIF-TYPE1-CRC. What: /sys/block//integrity/protection_interval_bytes Date: July 2015 Contact: Martin K. Petersen Description: Describes the number of data bytes which are protected by one integrity tuple. Typically the device's logical block size. What: /sys/block//integrity/read_verify Date: June 2008 Contact: Martin K. Petersen Description: Indicates whether the block layer should verify the integrity of read requests serviced by devices that support sending integrity metadata. What: /sys/block//integrity/tag_size Date: June 2008 Contact: Martin K. Petersen Description: Number of bytes of integrity tag space available per 512 bytes of data. What: /sys/block//integrity/write_generate Date: June 2008 Contact: Martin K. Petersen Description: Indicates whether the block layer should automatically generate checksums for write requests bound for devices that support receiving integrity metadata. What: /sys/block///alignment_offset Date: April 2009 Contact: Martin K. Petersen Description: Storage devices may report a physical block size that is bigger than the logical block size (for instance a drive with 4KB physical sectors exposing 512-byte logical blocks to the operating system). This parameter indicates how many bytes the beginning of the partition is offset from the disk's natural alignment. What: /sys/block///discard_alignment Date: May 2011 Contact: Martin K. Petersen Description: Devices that support discard functionality may internally allocate space in units that are bigger than the exported logical block size. The discard_alignment parameter indicates how many bytes the beginning of the partition is offset from the internal allocation unit's natural alignment. What: /sys/block///stat Date: February 2008 Contact: Jerome Marchand Description: The /sys/block///stat files display the I/O statistics of partition . The format is the same as the format of /sys/block//stat. What: /sys/block//queue/add_random Date: June 2010 Contact: linux-block@vger.kernel.org Description: [RW] This file allows to turn off the disk entropy contribution. Default value of this file is '1'(on). What: /sys/block//queue/chunk_sectors Date: September 2016 Contact: Hannes Reinecke Description: [RO] chunk_sectors has different meaning depending on the type of the disk. For a RAID device (dm-raid), chunk_sectors indicates the size in 512B sectors of the RAID volume stripe segment. For a zoned block device, either host-aware or host-managed, chunk_sectors indicates the size in 512B sectors of the zones of the device, with the eventual exception of the last zone of the device which may be smaller. What: /sys/block//queue/dax Date: June 2016 Contact: linux-block@vger.kernel.org Description: [RO] This file indicates whether the device supports Direct Access (DAX), used by CPU-addressable storage to bypass the pagecache. It shows '1' if true, '0' if not. What: /sys/block//queue/discard_granularity Date: May 2011 Contact: Martin K. Petersen Description: [RO] Devices that support discard functionality may internally allocate space using units that are bigger than the logical block size. The discard_granularity parameter indicates the size of the internal allocation unit in bytes if reported by the device. Otherwise the discard_granularity will be set to match the device's physical block size. A discard_granularity of 0 means that the device does not support discard functionality. What: /sys/block//queue/discard_max_bytes Date: May 2011 Contact: Martin K. Petersen Description: [RW] While discard_max_hw_bytes is the hardware limit for the device, this setting is the software limit. Some devices exhibit large latencies when large discards are issued, setting this value lower will make Linux issue smaller discards and potentially help reduce latencies induced by large discard operations. What: /sys/block//queue/discard_max_hw_bytes Date: July 2015 Contact: linux-block@vger.kernel.org Description: [RO] Devices that support discard functionality may have internal limits on the number of bytes that can be trimmed or unmapped in a single operation. The `discard_max_hw_bytes` parameter is set by the device driver to the maximum number of bytes that can be discarded in a single operation. Discard requests issued to the device must not exceed this limit. A `discard_max_hw_bytes` value of 0 means that the device does not support discard functionality. What: /sys/block//queue/discard_zeroes_data Date: May 2011 Contact: Martin K. Petersen Description: [RO] Will always return 0. Don't rely on any specific behavior for discards, and don't read this file. What: /sys/block//queue/fua Date: May 2018 Contact: linux-block@vger.kernel.org Description: [RO] Whether or not the block driver supports the FUA flag for write requests. FUA stands for Force Unit Access. If the FUA flag is set that means that write requests must bypass the volatile cache of the storage device. What: /sys/block//queue/hw_sector_size Date: January 2008 Contact: linux-block@vger.kernel.org Description: [RO] This is the hardware sector size of the device, in bytes. What: /sys/block//queue/independent_access_ranges/ Date: October 2021 Contact: linux-block@vger.kernel.org Description: [RO] The presence of this sub-directory of the /sys/block/xxx/queue/ directory indicates that the device is capable of executing requests targeting different sector ranges in parallel. For instance, single LUN multi-actuator hard-disks will have an independent_access_ranges directory if the device correctly advertizes the sector ranges of its actuators. The independent_access_ranges directory contains one directory per access range, with each range described using the sector (RO) attribute file to indicate the first sector of the range and the nr_sectors (RO) attribute file to indicate the total number of sectors in the range starting from the first sector of the range. For example, a dual-actuator hard-disk will have the following independent_access_ranges entries.:: $ tree /sys/block//queue/independent_access_ranges/ /sys/block//queue/independent_access_ranges/ |-- 0 | |-- nr_sectors | `-- sector `-- 1 |-- nr_sectors `-- sector The sector and nr_sectors attributes use 512B sector unit, regardless of the actual block size of the device. Independent access ranges do not overlap and include all sectors within the device capacity. The access ranges are numbered in increasing order of the range start sector, that is, the sector attribute of range 0 always has the value 0. What: /sys/block//queue/io_poll Date: November 2015 Contact: linux-block@vger.kernel.org Description: [RW] When read, this file shows whether polling is enabled (1) or disabled (0). Writing '0' to this file will disable polling for this device. Writing any non-zero value will enable this feature. What: /sys/block//queue/io_poll_delay Date: November 2016 Contact: linux-block@vger.kernel.org Description: [RW] If polling is enabled, this controls what kind of polling will be performed. It defaults to -1, which is classic polling. In this mode, the CPU will repeatedly ask for completions without giving up any time. If set to 0, a hybrid polling mode is used, where the kernel will attempt to make an educated guess at when the IO will complete. Based on this guess, the kernel will put the process issuing IO to sleep for an amount of time, before entering a classic poll loop. This mode might be a little slower than pure classic polling, but it will be more efficient. If set to a value larger than 0, the kernel will put the process issuing IO to sleep for this amount of microseconds before entering classic polling. What: /sys/block//queue/io_timeout Date: November 2018 Contact: Weiping Zhang Description: [RW] io_timeout is the request timeout in milliseconds. If a request does not complete in this time then the block driver timeout handler is invoked. That timeout handler can decide to retry the request, to fail it or to start a device recovery strategy. What: /sys/block//queue/iostats Date: January 2009 Contact: linux-block@vger.kernel.org Description: [RW] This file is used to control (on/off) the iostats accounting of the disk. What: /sys/block//queue/logical_block_size Date: May 2009 Contact: Martin K. Petersen Description: [RO] This is the smallest unit the storage device can address. It is typically 512 bytes. What: /sys/block//queue/max_active_zones Date: July 2020 Contact: Niklas Cassel Description: [RO] For zoned block devices (zoned attribute indicating "host-managed" or "host-aware"), the sum of zones belonging to any of the zone states: EXPLICIT OPEN, IMPLICIT OPEN or CLOSED, is limited by this value. If this value is 0, there is no limit. If the host attempts to exceed this limit, the driver should report this error with BLK_STS_ZONE_ACTIVE_RESOURCE, which user space may see as the EOVERFLOW errno. What: /sys/block//queue/max_discard_segments Date: February 2017 Contact: linux-block@vger.kernel.org Description: [RO] The maximum number of DMA scatter/gather entries in a discard request. What: /sys/block//queue/max_hw_sectors_kb Date: September 2004 Contact: linux-block@vger.kernel.org Description: [RO] This is the maximum number of kilobytes supported in a single data transfer. What: /sys/block//queue/max_integrity_segments Date: September 2010 Contact: linux-block@vger.kernel.org Description: [RO] Maximum number of elements in a DMA scatter/gather list with integrity data that will be submitted by the block layer core to the associated block driver. What: /sys/block//queue/max_open_zones Date: July 2020 Contact: Niklas Cassel Description: [RO] For zoned block devices (zoned attribute indicating "host-managed" or "host-aware"), the sum of zones belonging to any of the zone states: EXPLICIT OPEN or IMPLICIT OPEN, is limited by this value. If this value is 0, there is no limit. What: /sys/block//queue/max_sectors_kb Date: September 2004 Contact: linux-block@vger.kernel.org Description: [RW] This is the maximum number of kilobytes that the block layer will allow for a filesystem request. Must be smaller than or equal to the maximum size allowed by the hardware. What: /sys/block//queue/max_segment_size Date: March 2010 Contact: linux-block@vger.kernel.org Description: [RO] Maximum size in bytes of a single element in a DMA scatter/gather list. What: /sys/block//queue/max_segments Date: March 2010 Contact: linux-block@vger.kernel.org Description: [RO] Maximum number of elements in a DMA scatter/gather list that is submitted to the associated block driver. What: /sys/block//queue/minimum_io_size Date: April 2009 Contact: Martin K. Petersen Description: [RO] Storage devices may report a granularity or preferred minimum I/O size which is the smallest request the device can perform without incurring a performance penalty. For disk drives this is often the physical block size. For RAID arrays it is often the stripe chunk size. A properly aligned multiple of minimum_io_size is the preferred request size for workloads where a high number of I/O operations is desired. What: /sys/block//queue/nomerges Date: January 2010 Contact: linux-block@vger.kernel.org Description: [RW] Standard I/O elevator operations include attempts to merge contiguous I/Os. For known random I/O loads these attempts will always fail and result in extra cycles being spent in the kernel. This allows one to turn off this behavior on one of two ways: When set to 1, complex merge checks are disabled, but the simple one-shot merges with the previous I/O request are enabled. When set to 2, all merge tries are disabled. The default value is 0 - which enables all types of merge tries. What: /sys/block//queue/nr_requests Date: July 2003 Contact: linux-block@vger.kernel.org Description: [RW] This controls how many requests may be allocated in the block layer for read or write requests. Note that the total allocated number may be twice this amount, since it applies only to reads or writes (not the accumulated sum). To avoid priority inversion through request starvation, a request queue maintains a separate request pool per each cgroup when CONFIG_BLK_CGROUP is enabled, and this parameter applies to each such per-block-cgroup request pool. IOW, if there are N block cgroups, each request queue may have up to N request pools, each independently regulated by nr_requests. What: /sys/block//queue/nr_zones Date: November 2018 Contact: Damien Le Moal Description: [RO] nr_zones indicates the total number of zones of a zoned block device ("host-aware" or "host-managed" zone model). For regular block devices, the value is always 0. What: /sys/block//queue/optimal_io_size Date: April 2009 Contact: Martin K. Petersen Description: [RO] Storage devices may report an optimal I/O size, which is the device's preferred unit for sustained I/O. This is rarely reported for disk drives. For RAID arrays it is usually the stripe width or the internal track size. A properly aligned multiple of optimal_io_size is the preferred request size for workloads where sustained throughput is desired. If no optimal I/O size is reported this file contains 0. What: /sys/block//queue/physical_block_size Date: May 2009 Contact: Martin K. Petersen Description: [RO] This is the smallest unit a physical storage device can write atomically. It is usually the same as the logical block size but may be bigger. One example is SATA drives with 4KB sectors that expose a 512-byte logical block size to the operating system. For stacked block devices the physical_block_size variable contains the maximum physical_block_size of the component devices. What: /sys/block//queue/read_ahead_kb Date: May 2004 Contact: linux-block@vger.kernel.org Description: [RW] Maximum number of kilobytes to read-ahead for filesystems on this block device. What: /sys/block//queue/rotational Date: January 2009 Contact: linux-block@vger.kernel.org Description: [RW] This file is used to stat if the device is of rotational type or non-rotational type. What: /sys/block//queue/rq_affinity Date: September 2008 Contact: linux-block@vger.kernel.org Description: [RW] If this option is '1', the block layer will migrate request completions to the cpu "group" that originally submitted the request. For some workloads this provides a significant reduction in CPU cycles due to caching effects. For storage configurations that need to maximize distribution of completion processing setting this option to '2' forces the completion to run on the requesting cpu (bypassing the "group" aggregation logic). What: /sys/block//queue/scheduler Date: October 2004 Contact: linux-block@vger.kernel.org Description: [RW] When read, this file will display the current and available IO schedulers for this block device. The currently active IO scheduler will be enclosed in [] brackets. Writing an IO scheduler name to this file will switch control of this block device to that new IO scheduler. Note that writing an IO scheduler name to this file will attempt to load that IO scheduler module, if it isn't already present in the system. What: /sys/block//queue/stable_writes Date: September 2020 Contact: linux-block@vger.kernel.org Description: [RW] This file will contain '1' if memory must not be modified while it is being used in a write request to this device. When this is the case and the kernel is performing writeback of a page, the kernel will wait for writeback to complete before allowing the page to be modified again, rather than allowing immediate modification as is normally the case. This restriction arises when the device accesses the memory multiple times where the same data must be seen every time -- for example, once to calculate a checksum and once to actually write the data. If no such restriction exists, this file will contain '0'. This file is writable for testing purposes. What: /sys/block//queue/throttle_sample_time Date: March 2017 Contact: linux-block@vger.kernel.org Description: [RW] This is the time window that blk-throttle samples data, in millisecond. blk-throttle makes decision based on the samplings. Lower time means cgroups have more smooth throughput, but higher CPU overhead. This exists only when CONFIG_BLK_DEV_THROTTLING_LOW is enabled. What: /sys/block//queue/wbt_lat_usec Date: November 2016 Contact: linux-block@vger.kernel.org Description: [RW] If the device is registered for writeback throttling, then this file shows the target minimum read latency. If this latency is exceeded in a given window of time (see wb_window_usec), then the writeback throttling will start scaling back writes. Writing a value of '0' to this file disables the feature. Writing a value of '-1' to this file resets the value to the default setting. What: /sys/block//queue/write_cache Date: April 2016 Contact: linux-block@vger.kernel.org Description: [RW] When read, this file will display whether the device has write back caching enabled or not. It will return "write back" for the former case, and "write through" for the latter. Writing to this file can change the kernels view of the device, but it doesn't alter the device state. This means that it might not be safe to toggle the setting from "write back" to "write through", since that will also eliminate cache flushes issued by the kernel. What: /sys/block//queue/write_same_max_bytes Date: January 2012 Contact: Martin K. Petersen Description: [RO] Some devices support a write same operation in which a single data block can be written to a range of several contiguous blocks on storage. This can be used to wipe areas on disk or to initialize drives in a RAID configuration. write_same_max_bytes indicates how many bytes can be written in a single write same command. If write_same_max_bytes is 0, write same is not supported by the device. What: /sys/block//queue/write_zeroes_max_bytes Date: November 2016 Contact: Chaitanya Kulkarni Description: [RO] Devices that support write zeroes operation in which a single request can be issued to zero out the range of contiguous blocks on storage without having any payload in the request. This can be used to optimize writing zeroes to the devices. write_zeroes_max_bytes indicates how many bytes can be written in a single write zeroes command. If write_zeroes_max_bytes is 0, write zeroes is not supported by the device. What: /sys/block//queue/zone_append_max_bytes Date: May 2020 Contact: linux-block@vger.kernel.org Description: [RO] This is the maximum number of bytes that can be written to a sequential zone of a zoned block device using a zone append write operation (REQ_OP_ZONE_APPEND). This value is always 0 for regular block devices. What: /sys/block//queue/zone_write_granularity Date: January 2021 Contact: linux-block@vger.kernel.org Description: [RO] This indicates the alignment constraint, in bytes, for write operations in sequential zones of zoned block devices (devices with a zoned attributed that reports "host-managed" or "host-aware"). This value is always 0 for regular block devices. What: /sys/block//queue/zoned Date: September 2016 Contact: Damien Le Moal Description: [RO] zoned indicates if the device is a zoned block device and the zone model of the device if it is indeed zoned. The possible values indicated by zoned are "none" for regular block devices and "host-aware" or "host-managed" for zoned block devices. The characteristics of host-aware and host-managed zoned block devices are described in the ZBC (Zoned Block Commands) and ZAC (Zoned Device ATA Command Set) standards. These standards also define the "drive-managed" zone model. However, since drive-managed zoned block devices do not support zone commands, they will be treated as regular block devices and zoned will report "none". What: /sys/block//stat Date: February 2008 Contact: Jerome Marchand Description: The /sys/block//stat files displays the I/O statistics of disk . They contain 11 fields: == ============================================== 1 reads completed successfully 2 reads merged 3 sectors read 4 time spent reading (ms) 5 writes completed 6 writes merged 7 sectors written 8 time spent writing (ms) 9 I/Os currently in progress 10 time spent doing I/Os (ms) 11 weighted time spent doing I/Os (ms) 12 discards completed 13 discards merged 14 sectors discarded 15 time spent discarding (ms) 16 flush requests completed 17 time spent flushing (ms) == ============================================== For more details refer Documentation/admin-guide/iostats.rst