# OpenBMC Anti-patterns From [Wikipedia](https://en.wikipedia.org/wiki/Anti-pattern): "An anti-pattern is a common response to a recurring problem that is usually ineffective and risks being highly counterproductive." The developers of OpenBMC do not get 100% of decisions right 100% of the time. That, combined with the fact that software development is often an exercise in copying and pasting, results in mistakes happening over and over again. This page aims to document some of the anti-patterns that exist in OpenBMC to ease the job of those reviewing code. If an anti-pattern is spotted, rather that repeating the same explanations over and over, a link to this document can be provided. ## Anti-pattern template [one line description] ### Identification (1 paragraph) Describe how to spot the anti-pattern. ### Description (1 paragraph) Describe the negative effects of the anti-pattern. ### Background (1 paragraph) Describe why the anti-pattern exists. If you don't know, try running git blame and look at who wrote the code originally, and ask them on the mailing list or in IRC what their original intent was, so it can be documented here (and you may possibly discover it isn't as much of an anti-pattern as you thought). If you are unable to determine why the anti-pattern exists, put: "Unknown" here. ### Resolution (1 paragraph) Describe the preferred way to solve the problem solved by the anti-pattern and the positive effects of solving it in the manner described. ## Custom ArgumentParser object ### Identification The ArgumentParser object is typically present to wrap calls to get options. It abstracts away the parsing and provides a `[]` operator to access the parameters. ### Description Writing a custom ArgumentParser object creates nearly duplicate code in a repository. The ArgumentParser itself is the same, however, the options provided differ. Writing a custom argument parser re-invents the wheel on c++ command line argument parsing. ### Background The ArgumentParser exists because it was in place early and then copied into each new repository as an easy way to handle argument parsing. ### Resolution The CLI11 library was designed and implemented specifically to support modern argument parsing. It handles the cases seen in OpenBMC daemons and has some handy built-in validators, and allows easy customizations to validation. ## Explicit AC_MSG_ERROR on PKG_CHECK_MODULES failure ### Identification ``` PKG_CHECK_MODULES( [PHOSPHOR_LOGGING], [phosphor-logging], [], [AC_MSG_ERROR([Could not find phosphor-logging...openbmc/phosphor-logging package required])]) ``` ### Description The autotools PKG_CHECK_MODULES macro provides the ability to specify an "if found" and "if not found" behavior. By default, the "if not found" behavior will list the package not found. In many cases, this is sufficient to a developer to know what package is missing. In most cases, it's another OpenBMC package. If the library sought's name isn't related to the package providing it, then the failure message should be set to something more useful to the developer. ### Resolution Use the default macro behavior when it is clear that the missing package is another OpenBMC package. ``` PKG_CHECK_MODULES([PHOSPHOR_LOGGING], [phosphor-logging]) ``` ## Explicit listing of shared library packages in RDEPENDS in bitbake metadata ### Identification ``` RDEPENDS_${PN} = "libsystemd" ``` ### Description Out of the box bitbake examines built applications, automatically adds runtime dependencies and thus ensures any library packages dependencies are automatically added to images, sdks, etc. There is no need to list them explicitly in a recipe. Dependencies change over time, and listing them explicitly is likely prone to errors - the net effect being unnecessary shared library packages being installed into images. Consult https://www.yoctoproject.org/docs/latest/mega-manual/mega-manual.html#var-RDEPENDS for information on when to use explicit runtime dependencies. ### Background The initial bitbake metadata author for OpenBMC was not aware that bitbake added these dependencies automatically. Initial bitbake metadata therefore listed shared library dependencies explicitly, and was subsequently copy pasted. ### Resolution Do not list shared library packages in RDEPENDS. This eliminates the possibility of installing unnecessary shared library packages due to unmaintained library dependency lists in bitbake metadata. ## Use of /usr/bin/env in systemd service files ### Identification In systemd unit files: ``` [Service] ExecStart=/usr/bin/env some-application ``` ### Description Outside of OpenBMC, most applications that provide systemd unit files don't launch applications in this way. So if nothing else, this just looks strange and violates the [princple of least astonishment](https://en.wikipedia.org/wiki/Principle_of_least_astonishment). ### Background This anti-pattern exists because a requirement exists to enable live patching of applications on read-only filesystems. Launching applications in this way was part of the implementation that satisfied the live patch requirement. For example: ``` /usr/bin/phosphor-hwmon ``` on a read-only filesystem becomes: ``` /usr/local/bin/phosphor-hwmon` ``` on a writeable /usr/local filesystem. ### Resolution The /usr/bin/env method only enables live patching of applications. A method that supports live patching of any file in the read-only filesystem has emerged. Assuming a writeable filesystem exists _somewhere_ on the bmc, something like: ``` mkdir -p /var/persist/usr mkdir -p /var/persist/work/usr mount -t overlay -o lowerdir=/usr,upperdir=/var/persist/usr,workdir=/var/persist/work/usr overlay /usr ``` can enable live system patching without any additional requirements on how applications are launched from systemd service files. This is the preferred method for enabling live system patching as it allows OpenBMC developers to write systemd service files in the same way as most other projects. To undo existing instances of this anti-pattern remove /usr/bin/env from systemd service files and replace with the fully qualified path to the application being launched. For example, given an application in /usr/bin: ``` sed -i s,/usr/bin/env ,/usr/bin/, foo.service ``` ## Placement of applications in /sbin or /usr/sbin ### Identification OpenBMC applications that are installed in /usr/sbin. $sbindir in bitbake metadata, makefiles or configure scripts. ### Description Installing OpenBMC applications in /usr/sbin violates the [principle of least astonishment](https://en.wikipedia.org/wiki/Principle_of_least_astonishment) and more importantly violates the [FHS](https://en.wikipedia.org/wiki/Filesystem_Hierarchy_Standard). ### Background The sbin anti-pattern exists because the FHS was misinterpreted at an early point in OpenBMC project history, and has proliferated ever since. From the hier(7) man page: ``` /usr/bin This is the primary directory for executable programs. Most programs executed by normal users which are not needed for booting or for repairing the system and which are not installed locally should be placed in this directory. /usr/sbin This directory contains program binaries for system administration which are not essential for the boot process, for mounting /usr, or for system repair. ``` The FHS description for /usr/sbin refers to "system administration" but the de-facto interpretation of the system being administered refers to the OS installation and not a system in the OpenBMC sense of managed system. As such OpenBMC applications should be installed in /usr/bin. ### Resolution Install OpenBMC applications in /usr/bin/. ## Handling unexpected error codes and exceptions ### Identification The anti-pattern is for an application to continue processing after it encounters unexpected conditions in the form of error codes and exceptions and not capturing the data needed to resolve the problem. Example C++ code: ``` using InternalFailure = sdbusplus::xyz::openbmc_project::Common::Error::InternalFailure; try { ... use d-Bus APIs... } catch (InternalFailure& e) { phosphor::logging::commit(); } ``` ### Description Suppressing unexpected errors can lead an application to incorrect or erratic behavior which can affect the service it provides and the overall system. Writing a log entry instead of a core dump may not give enough information to debug a truly unexpected problem, so developers do not get a chance to investigate problems and the system's reliability does not improve over time. ### Background Programmers want their application to continue processing when it encounters conditions it can recover from. Sometimes they try too hard and continue when it is not appropriate. Programmers also want to log what is happening in the application, so they write log entries that give debug data when something goes wrong, typically targeted for their use. They don't consider how the log entry is consumed by the BMC administrator or automated service tools. The `InternalFailure` in the [Phosphor logging README][] is overused. [Phosphor logging README]: https://github.com/openbmc/phosphor-logging/blob/master/README.md ### Resolution Several items are needed: 1. Check all places where a return code or errno value is given. Strongly consider that a default error handler should throw an exception, for example `std::system_error`. 2. Have a good reason to handle specific error codes. See below. 3. Have a good reason to handle specific exceptions. Allow other exceptions to propagate. 4. Document (in terms of impacts to other services) what happens when this service fails, stops, or is restarted. Use that to inform the recovery strategy. In the error handler: 1. Consider what data (if any) should be logged. Determine who will consume the log entry: BMC developers, administrator, or an analysis tool. Usually the answer is more than one of these. The following example log entries use an IPMI request to set network access on, but the user input is invalid. - BMC Developer: Reference internal applications, services, pids, etc. the developer would be familiar with. Example: `ipmid service successfully processed a network setting packet, however the user input of USB0 is not a valid network interface to configure.` - Administrator: Reference the external interfaces of the BMC such as the REST API. They can respond to feedback about invalid input, or a need to restart the BMC. Example: `The network interface of USB0 is not a valid option. Retry the IPMI command with a valid interface.` - Analyzer tool: Consider breaking the log down and including several properties which an analyzer can leverage. For instance, tagging the log with 'Internal' is not helpful. However, breaking that down into something like [UserInput][IPMI][Network] tells at a quick glance that the input received for configuring the network via an IPMI command was invalid. Categorization and system impact are key things to focus on when creating logs for an analysis application. Example: `[UserInput][IPMI][Network][Config][Warning] Interface USB0 not valid.` 2. Determine if the application can fully recover from the condition. If not, don't continue. Allow the system to determine if it writes a core dump or restarts the service. If there are severe impacts when the service fails, consider using a better error recovery mechanism. ## Non-standard debug application options and logging ### Identification An application uses non-standard methods on startup to indicate verbose logging and/or does not utilize standard systemd-journald debug levels for logging. ### Description When debugging issues within OpenBMC that cross multiple applications, it's very difficult to enable the appropriate debug when different applications have different mechanisms for enabling debug. For example, different OpenBMC applications take the following as command line parameters to enable extra debug: - 0xff, --vv, -vv, -v, --verbose, Along these same lines, some applications then have their own internal methods of writing debug data. They use std::cout, printf, fprintf, ... Doing this causes other issues when trying to compare debug data across different applications that may be having their buffers flushed at different times (and picked up by journald). ### Background Everyone has their own ways to debug. There was no real standard within OpenBMC on how to do it so everyone came up with whatever they were familiar with. ### Resolution If an OpenBMC application is to support enhanced debug via a command line then it will support the standard "-v,--verbose" option. In general, OpenBMC developers should utilize the "debug" journald level for debug messages. This can be enabled/disabled globally and would apply to all applications. If a developer believes this would cause too much debug data in certain cases then they can protect these journald debug calls around a --verbose command line option.