/*
// Copyright (c) 2019 Intel Corporation
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//      http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
*/
#pragma once
#include <registries.hpp>

namespace redfish::message_registries::openbmc
{
const Header header = {
    .copyright = "Copyright 2018 OpenBMC. All rights reserved.",
    .type = "#MessageRegistry.v1_0_0.MessageRegistry",
    .id = "OpenBMC.0.1.0",
    .name = "OpenBMC Message Registry",
    .language = "en",
    .description = "This registry defines the base messages for OpenBMC.",
    .registryPrefix = "OpenBMC",
    .registryVersion = "0.1.0",
    .owningEntity = "OpenBMC",
};
const std::array registry = {
    MessageEntry{
        "ADDDCCorrectable",
        {
            .description = "Indicates an ADDDC Correctable Error.",
            .message =
                "ADDDC Correctable Error.Socket=%1 Channel=%2 DIMM=%3 Rank=%4.",
            .severity = "Warning",
            .numberOfArgs = 4,
            .paramTypes =
                {
                    "number",
                    "string",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "BIOSBoot",
        {
            .description =
                "Indicates BIOS has transitioned control to the OS Loader.",
            .message = "BIOS System Boot.",
            .severity = "OK",
            .numberOfArgs = 0,
            .paramTypes = {},
            .resolution = "None.",
        }},
    MessageEntry{
        "BIOSPOSTError",
        {
            .description = "Indicates BIOS POST has encountered an error.",
            .message = "BIOS POST Error. Error Code=%1",
            .severity = "Warning",
            .numberOfArgs = 1,
            .paramTypes = {"number"},
            .resolution = "None.",
        }},
    MessageEntry{"BIOSRecoveryComplete",
                 {
                     .description = "Indicates BIOS Recovery has completed.",
                     .message = "BIOS Recovery Complete.",
                     .severity = "OK",
                     .numberOfArgs = 0,
                     .paramTypes = {},
                     .resolution = "None.",
                 }},
    MessageEntry{"BIOSRecoveryStart",
                 {
                     .description = "Indicates BIOS Recovery has started.",
                     .message = "BIOS Recovery Start.",
                     .severity = "Warning",
                     .numberOfArgs = 0,
                     .paramTypes = {},
                     .resolution = "None.",
                 }},
    MessageEntry{"CPUError",
                 {
                     .description = "Indicates that a CPU Error occurred of "
                                    "the specified type or cause.",
                     .message = "CPU Error Occurred: %1.",
                     .severity = "Critical",
                     .numberOfArgs = 1,
                     .paramTypes = {"string"},
                     .resolution = "None.",
                 }},
    MessageEntry{
        "DCPowerOff",
        {
            .description = "Indicates that the system DC power is off.",
            .message = "Host system DC power is off",
            .severity = "OK",
            .numberOfArgs = 0,
            .paramTypes = {},
            .resolution = "None.",
        }},
    MessageEntry{"DCPowerOn",
                 {
                     .description = "Indicates that the system DC power is on.",
                     .message = "Host system DC power is on",
                     .severity = "OK",
                     .numberOfArgs = 0,
                     .paramTypes = {},
                     .resolution = "None.",
                 }},
    MessageEntry{
        "EventLogCleared",
        {
            .description = "Indicates that the event log has been cleared.",
            .message = "Event Log Cleared.",
            .severity = "OK",
            .numberOfArgs = 0,
            .paramTypes = {},
            .resolution = "None.",
        }},
    MessageEntry{
        "FanInserted",
        {
            .description = "Indicates that a system fan has been inserted.",
            .message = "%1 inserted.",
            .severity = "OK",
            .numberOfArgs = 1,
            .paramTypes = {"string"},
            .resolution = "None.",
        }},
    MessageEntry{"FanRedundancyLost",
                 {
                     .description =
                         "Indicates that system fan redundancy has been lost.",
                     .message = "Fan redundancy lost.",
                     .severity = "Warning",
                     .numberOfArgs = 0,
                     .paramTypes = {},
                     .resolution = "None.",
                 }},
    MessageEntry{
        "FanRedundancyRegained",
        {
            .description =
                "Indicates that system fan redundancy has been regained.",
            .message = "Fan redundancy regained.",
            .severity = "OK",
            .numberOfArgs = 0,
            .paramTypes = {},
            .resolution = "None.",
        }},
    MessageEntry{
        "FanRemoved",
        {
            .description = "Indicates that a system fan has been removed.",
            .message = "%1 removed.",
            .severity = "OK",
            .numberOfArgs = 1,
            .paramTypes = {"string"},
            .resolution = "None.",
        }},
    MessageEntry{
        "FirmwareUpdateCompleted",
        {
            .description =
                "Indicates a firmware update has completed successfully.",
            .message = "%1 firmware update to version %2 completed "
                       "successfully.",
            .severity = "OK",
            .numberOfArgs = 2,
            .paramTypes = {"string", "string"},
            .resolution = "None.",
        }},
    MessageEntry{"FirmwareUpdateFailed",
                 {
                     .description = "Indicates a firmware update has failed.",
                     .message = "%1 firmware update to version %2 failed.",
                     .severity = "Warning",
                     .numberOfArgs = 2,
                     .paramTypes = {"string", "string"},
                     .resolution = "None.",
                 }},
    MessageEntry{"FirmwareUpdateStarted",
                 {
                     .description = "Indicates a firmware update has started.",
                     .message = "%1 firmware update to version %2 started.",
                     .severity = "OK",
                     .numberOfArgs = 2,
                     .paramTypes = {"string", "string"},
                     .resolution = "None.",
                 }},
    MessageEntry{
        "GeneralFirmwareSecurityViolation",
        {
            .description =
                "Indicates a general firmware security violation has occurred.",
            .message = "Firmware security violation: %1.",
            .severity = "Critical",
            .numberOfArgs = 1,
            .paramTypes = {"string"},
            .resolution = "None.",
        }},
    MessageEntry{
        "InvalidLoginAttempted",
        {
            .description =
                "Indicates that a login was attempted on the specified "
                "interface with an invalid username or password.",
            .message = "Invalid username or password attempted on %1.",
            .severity = "Warning",
            .numberOfArgs = 1,
            .paramTypes = {"string"},
            .resolution = "None.",
        }},
    MessageEntry{
        "InventoryAdded",
        {
            .description =
                "Indicates that an inventory item with the specified model, "
                "type, and serial number was installed.",
            .message = "%1 %2 with serial number %3 was installed.",
            .severity = "OK",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "string",
                    "string",
                    "string",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "InventoryRemoved",
        {
            .description =
                "Indicates that an inventory item with the specified model, "
                "type, and serial number was removed.",
            .message = "%1 %2 with serial number %3 was removed.",
            .severity = "OK",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "string",
                    "string",
                    "string",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "IntelUPILinkWidthReducedToHalf",
        {
            .description =
                "Indicates Intel UPI link width has reduced to half width.",
            .message = "Intel UPI link width reduced to half. Node=%1.",
            .severity = "Warning",
            .numberOfArgs = 1,
            .paramTypes =
                {
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "IntelUPILinkWidthReducedToQuarter",
        {
            .description =
                "Indicates Intel UPI link width has reduced to quarter width.",
            .message = "Intel UPI link width reduced to quarter. Node=%1.",
            .severity = "Warning",
            .numberOfArgs = 1,
            .paramTypes =
                {
                    "number",
                },
            .resolution = "None.",
        }},

    MessageEntry{
        "IPMIWatchdog",
        {
            .description = "Indicates that there is a host watchdog event.",
            .message = "Host Watchdog Event: %1",
            .severity = "OK",
            .numberOfArgs = 1,
            .paramTypes =
                {
                    "string",
                },
            .resolution = "None.",
        }},

    MessageEntry{
        "LegacyPCIPERR",
        {
            .description = "Indicates a Legacy PCI PERR.",
            .message = "Legacy PCI PERR. Bus=%1 Device=%2 Function=%3.",
            .severity = "Warning",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "LegacyPCISERR",
        {
            .description = "Indicates a Legacy PCI SERR.",
            .message = "Legacy PCI SERR. Bus=%1 Device=%2 Function=%3.",
            .severity = "Critical",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{"ManufacturingModeEntered",
                 {
                     .description = "Indicates that Factory, Manufacturing, or "
                                    "Test mode has been entered.",
                     .message = "Entered Manufacturing Mode.",
                     .severity = "Warning",
                     .numberOfArgs = 0,
                     .paramTypes = {},
                     .resolution = "None.",
                 }},
    MessageEntry{"MemoryECCCorrectable",
                 {
                     .description = "Indicates a Correctable Memory ECC error.",
                     .message = "Memory ECC correctable error. Socket=%1 "
                                "Channel=%2 DIMM=%3 Rank=%4.",
                     .severity = "Warning",
                     .numberOfArgs = 4,
                     .paramTypes =
                         {
                             "number",
                             "string",
                             "number",
                             "number",
                         },
                     .resolution = "None.",
                 }},
    MessageEntry{
        "MemoryECCUncorrectable",
        {
            .description = "Indicates an Uncorrectable Memory ECC error.",
            .message = "Memory ECC uncorrectable error. Socket=%1 Channel=%2 "
                       "DIMM=%3 Rank=%4.",
            .severity = "Critical",
            .numberOfArgs = 4,
            .paramTypes =
                {
                    "number",
                    "string",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "MemoryParityCommandAndAddress",
        {
            .description = "Indicates a Command and Address parity error.",
            .message = "Command and Address parity error. Socket=%1 Channel=%2 "
                       "DIMM=%3 ChannelValid=%4 DIMMValid=%5.",
            .severity = "Critical",
            .numberOfArgs = 5,
            .paramTypes =
                {
                    "number",
                    "string",
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{"MemoryParityNotKnown",
                 {
                     .description = "Indicates an unknown parity error.",
                     .message = "Memory parity error. Socket=%1 Channel=%2 "
                                "DIMM=%3 ChannelValid=%4 DIMMValid=%5.",
                     .severity = "Critical",
                     .numberOfArgs = 5,
                     .paramTypes =
                         {
                             "number",
                             "string",
                             "number",
                             "number",
                             "number",
                         },
                     .resolution = "None.",
                 }},
    MessageEntry{
        "MemoryRASConfigurationDisabled",
        {
            .description =
                "Indicates Memory RAS Disabled Configuration Status.",
            .message = "Memory RAS Configuration Disabled. Error=%1 Mode=%2.",
            .severity = "OK",
            .numberOfArgs = 2,
            .paramTypes =
                {
                    "string",
                    "string",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "MemoryRASConfigurationEnabled",
        {
            .description = "Indicates Memory RAS Enabled Configuration Status.",
            .message = "Memory RAS Configuration Enabled. Error=%1 Mode=%2.",
            .severity = "OK",
            .numberOfArgs = 2,
            .paramTypes =
                {
                    "string",
                    "string",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "MemoryRASModeDisabled",
        {
            .description = "Indicates Memory RAS Disabled Mode Selection.",
            .message = "Memory RAS Mode Select Disabled. Prior Mode=%1 "
                       "Selected Mode=%2.",
            .severity = "OK",
            .numberOfArgs = 2,
            .paramTypes =
                {
                    "string",
                    "string",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "MemoryRASModeEnabled",
        {
            .description = "Indicates Memory RAS Enabled Mode Selection.",
            .message = "Memory RAS Mode Select Enabled. Prior Mode=%1 Selected "
                       "Mode=%2.",
            .severity = "OK",
            .numberOfArgs = 2,
            .paramTypes =
                {
                    "string",
                    "string",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "MemoryThermTrip",
        {
            .description =
                "Indicates that the system memory ThermTrip is asserted.",
            .message = "Memory ThermTrip asserted.",
            .severity = "Critical",
            .numberOfArgs = 0,
            .paramTypes = {},
            .resolution = "None.",
        }},
    MessageEntry{
        "MirroringRedundancyDegraded",
        {
            .description =
                "Indicates the mirroring redundancy state is degraded.",
            .message = "Mirroring redundancy state degraded. Socket=%1 "
                       "Channel=%2 DIMM=%3 Pair=%4 Rank=%5.",
            .severity = "Warning",
            .numberOfArgs = 5,
            .paramTypes =
                {
                    "number",
                    "string",
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "MirroringRedundancyFull",
        {
            .description =
                "Indicates the mirroring redundancy state is fully redundant.",
            .message = "Mirroring redundancy state fully redundant. Socket=%1 "
                       "Channel=%2 DIMM=%3 Pair=%4 Rank=%5.",
            .severity = "OK",
            .numberOfArgs = 5,
            .paramTypes =
                {
                    "number",
                    "string",
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "NMIButtonPressed",
        {
            .description = "Indicates that the NMI button was pressed.",
            .message = "NMI Button Pressed.",
            .severity = "Critical",
            .numberOfArgs = 0,
            .paramTypes = {},
            .resolution = "None.",
        }},
    MessageEntry{"NMIDiagnosticInterrupt",
                 {
                     .description = "Indicates that an NMI Diagnostic "
                                    "Interrupt has been generated.",
                     .message = "NMI Diagnostic Interrupt.",
                     .severity = "Critical",
                     .numberOfArgs = 0,
                     .paramTypes = {},
                     .resolution = "None.",
                 }},
    MessageEntry{
        "PCIeCorrectableAdvisoryNonFatal",
        {
            .description =
                "Indicates a PCIe Correctable Advisory Non-fatal Error.",
            .message = "PCIe Correctable Advisory Non-fatal Error. Bus=%1 "
                       "Device=%2 Function=%3.",
            .severity = "Warning",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "PCIeCorrectableBadDLLP",
        {
            .description = "Indicates a PCIe Correctable Bad DLLP Error.",
            .message =
                "PCIe Correctable Bad DLLP. Bus=%1 Device=%2 Function=%3.",
            .severity = "Warning",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "PCIeCorrectableBadTLP",
        {
            .description = "Indicates a PCIe Correctable Bad TLP Error.",
            .message =
                "PCIe Correctable Bad TLP. Bus=%1 Device=%2 Function=%3.",
            .severity = "Warning",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "PCIeCorrectableHeaderLogOverflow",
        {
            .description =
                "Indicates a PCIe Correctable Header Log Overflow Error.",
            .message = "PCIe Correctable Header Log Overflow. Bus=%1 Device=%2 "
                       "Function=%3.",
            .severity = "Warning",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "PCIeCorrectableInternal",
        {
            .description = "Indicates a PCIe Correctable Internal Error.",
            .message = "PCIe Correctable Internal Error. Bus=%1 Device=%2 "
                       "Function=%3.",
            .severity = "Warning",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{"PCIeCorrectableLinkBWChanged",
                 {
                     .description =
                         "Indicates a PCIe Correctable Link BW Changed Error.",
                     .message = "PCIe Correctable Link BW Changed. Bus=%1 "
                                "Device=%2 Function=%3.",
                     .severity = "Warning",
                     .numberOfArgs = 3,
                     .paramTypes =
                         {
                             "number",
                             "number",
                             "number",
                         },
                     .resolution = "None.",
                 }},
    MessageEntry{
        "PCIeCorrectableReceiverError",
        {
            .description = "Indicates a PCIe Correctable Receiver Error.",
            .message = "PCIe Correctable Receiver Error. Bus=%1 Device=%2 "
                       "Function=%3.",
            .severity = "Warning",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "PCIeCorrectableReplayNumRollover",
        {
            .description = "Indicates a PCIe Correctable Replay Num Rollover.",
            .message = "PCIe Correctable Replay Num Rollover. Bus=%1 Device=%2 "
                       "Function=%3.",
            .severity = "Warning",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "PCIeCorrectableReplayTimerTimeout",
        {
            .description = "Indicates a PCIe Correctable Replay Timer Timeout.",
            .message = "PCIe Correctable Replay Timer Timeout. Bus=%1 "
                       "Device=%2 Function=%3.",
            .severity = "Warning",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{"PCIeCorrectableUnspecifiedAERError",
                 {
                     .description =
                         "Indicates a PCIe Correctable Unspecified AER Error.",
                     .message = "PCIe Correctable Unspecified AER Error. "
                                "Bus=%1 Device=%2 Function=%3.",
                     .severity = "Warning",
                     .numberOfArgs = 3,
                     .paramTypes =
                         {
                             "number",
                             "number",
                             "number",
                         },
                     .resolution = "None.",
                 }},
    MessageEntry{
        "PCIeFatalACSViolation",
        {
            .description = "Indicates a PCIe ACS Violation Error.",
            .message =
                "PCIe Fatal ACS Violation. Bus=%1 Device=%2 Function=%3.",
            .severity = "Error",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "PCIeFatalAtomicEgressBlocked",
        {
            .description = "Indicates a PCIe Atomic Egress Blocked Error.",
            .message = "PCIe Fatal Atomic Egress Blocked. Bus=%1 Device=%2 "
                       "Function=%3.",
            .severity = "Error",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "PCIeFatalCompleterAbort",
        {
            .description = "Indicates a PCIe Completer Abort Error.",
            .message =
                "PCIe Fatal Completer Abort. Bus=%1 Device=%2 Function=%3.",
            .severity = "Error",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "PCIeFatalCompletionTimeout",
        {
            .description = "Indicates a PCIe Completion Timeout Error.",
            .message =
                "PCIe Fatal Completion Timeout. Bus=%1 Device=%2 Function=%3.",
            .severity = "Error",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "PCIeFatalDataLinkLayerProtocol",
        {
            .description = "Indicates a PCIe Data Link Layer Protocol Error.",
            .message =
                "PCIe Fatal Data Link Layer Protocol Error. Bus=%1 Device=%2 "
                "Function=%3.",
            .severity = "Error",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "PCIeFatalECRCError",
        {
            .description = "Indicates a PCIe ECRC Error.",
            .message = "PCIe Fatal ECRC Error. Bus=%1 Device=%2 Function=%3.",
            .severity = "Error",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "PCIeFatalFlowControlProtocol",
        {
            .description = "Indicates a PCIe Flow Control Protocol Error.",
            .message =
                "PCIe Fatal Flow Control Protocol Error. Bus=%1 Device=%2 "
                "Function=%3.",
            .severity = "Error",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "PCIeFatalMalformedTLP",
        {
            .description = "Indicates a PCIe Malformed TLP Error.",
            .message =
                "PCIe Fatal Malformed TLP Error. Bus=%1 Device=%2 Function=%3.",
            .severity = "Error",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{"PCIeFatalMCBlockedTLP",
                 {
                     .description = "Indicates a PCIe MC Blocked TLP Error.",
                     .message = "PCIe Fatal MC Blocked TLP Error. Bus=%1 "
                                "Device=%2 Function=%3.",
                     .severity = "Error",
                     .numberOfArgs = 3,
                     .paramTypes =
                         {
                             "number",
                             "number",
                             "number",
                         },
                     .resolution = "None.",
                 }},
    MessageEntry{
        "PCIeFatalPoisonedTLP",
        {
            .description = "Indicates a PCIe Poisoned TLP Error.",
            .message =
                "PCIe Fatal Poisoned TLP Error. Bus=%1 Device=%2 Function=%3.",
            .severity = "Error",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "PCIeFatalReceiverBufferOverflow",
        {
            .description = "Indicates a PCIe Receiver Buffer Overflow Error.",
            .message = "PCIe Fatal Receiver Buffer Overflow. Bus=%1 Device=%2 "
                       "Function=%3.",
            .severity = "Error",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "PCIeFatalReceivedErrNonFatalMessage",
        {
            .description =
                "Indicates a PCIe Received ERR_NONFATAL Message Error.",
            .message =
                "PCIe Fatal Received ERR_NONFATAL Message. Bus=%1 Device=%2 "
                "Function=%3.",
            .severity = "Error",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{"PCIeFatalReceivedFatalMessageFromDownstream",
                 {
                     .description = "Indicates a PCIe Received Fatal Message "
                                    "From Downstream Error.",
                     .message =
                         "PCIe Fatal Received Fatal Message From Downstream. "
                         "Bus=%1 Device=%2 Function=%3.",
                     .severity = "Error",
                     .numberOfArgs = 3,
                     .paramTypes =
                         {
                             "number",
                             "number",
                             "number",
                         },
                     .resolution = "None.",
                 }},
    MessageEntry{
        "PCIeFatalSurpriseLinkDown",
        {
            .description = "Indicates a PCIe Surprise Link Down Error.",
            .message = "PCIe Fatal Surprise Link Down Error. Bus=%1 Device=%2 "
                       "Function=%3.",
            .severity = "Error",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "PCIeFatalTLPPrefixBlocked",
        {
            .description = "Indicates a PCIe TLP Prefix Blocked Error.",
            .message = "PCIe Fatal TLP Prefix Blocked Error. Bus=%1 Device=%2 "
                       "Function=%3.",
            .severity = "Error",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "PCIeFatalUncorrectableInternal",
        {
            .description = "Indicates a PCIe Uncorrectable Internal Error.",
            .message =
                "PCIe Fatal Uncorrectable Internal Error. Bus=%1 Device=%2 "
                "Function=%3.",
            .severity = "Error",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "PCIeFatalUnexpectedCompletion",
        {
            .description = "Indicates a PCIe Unexpected Completion Error.",
            .message = "PCIe Fatal Unexpected Completion. Bus=%1 Device=%2 "
                       "Function=%3.",
            .severity = "Error",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "PCIeFatalUnspecifiedNonAERFatalError",
        {
            .description = "Indicates a PCIe Unspecified Non-AER Fatal Error.",
            .message = "PCIe Fatal Unspecified Non-AER Fatal Error. Bus=%1 "
                       "Device=%2 Function=%3.",
            .severity = "Error",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "PCIeFatalUnsupportedRequest",
        {
            .description = "Indicates a PCIe Unsupported Request Error.",
            .message =
                "PCIe Fatal Unsupported Request. Bus=%1 Device=%2 Function=%3.",
            .severity = "Error",
            .numberOfArgs = 3,
            .paramTypes =
                {
                    "number",
                    "number",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "PowerButtonPressed",
        {
            .description = "Indicates that the power button was pressed.",
            .message = "Power Button Pressed.",
            .severity = "OK",
            .numberOfArgs = 0,
            .paramTypes = {},
            .resolution = "None.",
        }},
    MessageEntry{"PowerRestorePolicyApplied",
                 {
                     .description = "Indicates that power was restored and the "
                                    "BMC has applied the restore policy.",
                     .message = "Power restore policy applied.",
                     .severity = "OK",
                     .numberOfArgs = 0,
                     .paramTypes = {},
                     .resolution = "None.",
                 }},
    MessageEntry{
        "PowerSupplyConfigurationError",
        {
            .description = "Indicates an error in power supply configuration.",
            .message = "Power supply %1 configuration error.",
            .severity = "Critical",
            .numberOfArgs = 1,
            .paramTypes = {"string"},
            .resolution = "None.",
        }},
    MessageEntry{
        "PowerSupplyFanFailed",
        {
            .description =
                "Indicates that the specified power supply fan has failed.",
            .message = "Power supply %1 fan %2 failed.",
            .severity = "Critical",
            .numberOfArgs = 2,
            .paramTypes = {"string", "string"},
            .resolution = "None.",
        }},
    MessageEntry{
        "PowerSupplyFanRecovered",
        {
            .description =
                "Indicates that the power supply fan recovered from a failure.",
            .message = "Power supply %1 fan %2 recovered.",
            .severity = "OK",
            .numberOfArgs = 2,
            .paramTypes = {"string", "string"},
            .resolution = "None.",
        }},
    MessageEntry{"PowerSupplyFailed",
                 {
                     .description = "Indicates that a power supply has failed.",
                     .message = "Power supply %1 failed.",
                     .severity = "Critical",
                     .numberOfArgs = 1,
                     .paramTypes = {"string"},
                     .resolution = "None.",
                 }},
    MessageEntry{"PowerSupplyFailurePredicted",
                 {
                     .description =
                         "Indicates that a power supply is predicted to fail.",
                     .message = "Power supply %1 failure predicted.",
                     .severity = "Warning",
                     .numberOfArgs = 1,
                     .paramTypes = {"string"},
                     .resolution = "None.",
                 }},
    MessageEntry{
        "PowerSupplyInserted",
        {
            .description = "Indicates that a power supply has been inserted.",
            .message = "Power supply %1 inserted.",
            .severity = "OK",
            .numberOfArgs = 1,
            .paramTypes = {"string"},
            .resolution = "None.",
        }},
    MessageEntry{
        "PowerSupplyPowerGoodFailed",
        {
            .description = "Indicates that the power supply power good signal "
                           "failed to assert within the specified time.",
            .message = "Power supply power good failed to assert within %1 "
                       "milliseconds.",
            .severity = "Critical",
            .numberOfArgs = 1,
            .paramTypes = {"number"},
            .resolution = "None.",
        }},
    MessageEntry{"PowerSupplyPowerLost",
                 {
                     .description =
                         "Indicates that a power supply has lost input power.",
                     .message = "Power supply %1 power lost.",
                     .severity = "Critical",
                     .numberOfArgs = 1,
                     .paramTypes = {"string"},
                     .resolution = "None.",
                 }},
    MessageEntry{
        "PowerSupplyPowerRestored",
        {
            .description =
                "Indicates that a power supply input power was restored.",
            .message = "Power supply %1 power restored.",
            .severity = "OK",
            .numberOfArgs = 1,
            .paramTypes = {"string"},
            .resolution = "None.",
        }},
    MessageEntry{"PowerSupplyPredictedFailureRecovered",
                 {
                     .description = "Indicates that a power supply recovered "
                                    "from a predicted failure.",
                     .message = "Power supply %1 predicted failure recovered.",
                     .severity = "OK",
                     .numberOfArgs = 1,
                     .paramTypes = {"string"},
                     .resolution = "None.",
                 }},
    MessageEntry{
        "PowerSupplyRecovered",
        {
            .description =
                "Indicates that a power supply recovered from a failure.",
            .message = "Power supply %1 recovered.",
            .severity = "OK",
            .numberOfArgs = 1,
            .paramTypes = {"string"},
            .resolution = "None.",
        }},
    MessageEntry{
        "PowerSupplyRemoved",
        {
            .description = "Indicates that a power supply has been removed.",
            .message = "Power supply %1 removed.",
            .severity = "Warning",
            .numberOfArgs = 1,
            .paramTypes = {"string"},
            .resolution = "None.",
        }},
    MessageEntry{
        "ResetButtonPressed",
        {
            .description = "Indicates that the reset button was pressed.",
            .message = "Reset Button Pressed.",
            .severity = "OK",
            .numberOfArgs = 0,
            .paramTypes = {},
            .resolution = "None.",
        }},
    MessageEntry{"SELEntryAdded",
                 {
                     .description = "Indicates a SEL entry was added using the "
                                    "Add SEL Entry or Platform Event command.",
                     .message = "SEL Entry Added: %1",
                     .severity = "OK",
                     .numberOfArgs = 1,
                     .paramTypes =
                         {
                             "string",
                         },
                     .resolution = "None.",
                 }},
    MessageEntry{
        "SensorThresholdCriticalHighGoingHigh",
        {
            .description = "Indicates that a threshold sensor has crossed a "
                           "critical high threshold going high.",
            .message = "%1 sensor crossed a critical high threshold going "
                       "high. Reading=%2 Threshold=%3.",
            .severity = "Critical",
            .numberOfArgs = 3,
            .paramTypes = {"string", "number", "number"},
            .resolution = "Check the sensor or subsystem for errors.",
        }},
    MessageEntry{
        "SensorThresholdCriticalHighGoingLow",
        {
            .description = "Indicates that a threshold sensor has crossed a "
                           "critical high threshold going low.",
            .message = "%1 sensor crossed a critical high threshold going low. "
                       "Reading=%2 Threshold=%3.",
            .severity = "OK",
            .numberOfArgs = 3,
            .paramTypes = {"string", "number", "number"},
            .resolution = "None.",
        }},
    MessageEntry{
        "SensorThresholdCriticalLowGoingHigh",
        {
            .description = "Indicates that a threshold sensor has crossed a "
                           "critical low threshold going high.",
            .message = "%1 sensor crossed a critical low threshold going high. "
                       "Reading=%2 Threshold=%3.",
            .severity = "OK",
            .numberOfArgs = 3,
            .paramTypes = {"string", "number", "number"},
            .resolution = "None.",
        }},
    MessageEntry{
        "SensorThresholdCriticalLowGoingLow",
        {
            .description = "Indicates that a threshold sensor has crossed a "
                           "critical low threshold going low.",
            .message = "%1 sensor crossed a critical low threshold going low. "
                       "Reading=%2 Threshold=%3.",
            .severity = "Critical",
            .numberOfArgs = 3,
            .paramTypes = {"string", "number", "number"},
            .resolution = "Check the sensor or subsystem for errors.",
        }},
    MessageEntry{
        "SensorThresholdWarningHighGoingHigh",
        {
            .description = "Indicates that a threshold sensor has crossed a "
                           "warning high threshold going high.",
            .message = "%1 sensor crossed a warning high threshold going high. "
                       "Reading=%2 Threshold=%3.",
            .severity = "Warning",
            .numberOfArgs = 3,
            .paramTypes = {"string", "number", "number"},
            .resolution = "Check the sensor or subsystem for errors.",
        }},
    MessageEntry{
        "SensorThresholdWarningHighGoingLow",
        {
            .description = "Indicates that a threshold sensor has crossed a "
                           "warning high threshold going low.",
            .message = "%1 sensor crossed a warning high threshold going low. "
                       "Reading=%2 Threshold=%3.",
            .severity = "OK",
            .numberOfArgs = 3,
            .paramTypes = {"string", "number", "number"},
            .resolution = "None.",
        }},
    MessageEntry{
        "SensorThresholdWarningLowGoingHigh",
        {
            .description = "Indicates that a threshold sensor has crossed a "
                           "warning low threshold going high.",
            .message = "%1 sensor crossed a warning low threshold going high. "
                       "Reading=%2 Threshold=%3.",
            .severity = "OK",
            .numberOfArgs = 3,
            .paramTypes = {"string", "number", "number"},
            .resolution = "None.",
        }},
    MessageEntry{
        "SensorThresholdWarningLowGoingLow",
        {
            .description = "Indicates that a threshold sensor has crossed a "
                           "warning low threshold going low.",
            .message = "%1 sensor crossed a warning low threshold going low. "
                       "Reading=%2 Threshold=%3.",
            .severity = "Warning",
            .numberOfArgs = 3,
            .paramTypes = {"string", "number", "number"},
            .resolution = "Check the sensor or subsystem for errors.",
        }},
    MessageEntry{"ServiceFailure",
                 {
                     .description =
                         "Indicates that a service has exited unsuccessfully.",
                     .message = "Service %1 has exited unsuccessfully.",
                     .severity = "Warning",
                     .numberOfArgs = 1,
                     .paramTypes = {"string"},
                     .resolution = "None.",
                 }},
    MessageEntry{"SparingRedundancyDegraded",
                 {
                     .description =
                         "Indicates the sparing redundancy state is degraded.",
                     .message = "Sparing redundancy state degraded. Socket=%1 "
                                "Channel=%2 DIMM=%3 Domain=%4 Rank=%5.",
                     .severity = "Warning",
                     .numberOfArgs = 5,
                     .paramTypes =
                         {
                             "number",
                             "string",
                             "number",
                             "string",
                             "number",
                         },
                     .resolution = "None.",
                 }},
    MessageEntry{
        "SparingRedundancyFull",
        {
            .description =
                "Indicates the sparing redundancy state is fully redundant.",
            .message = "Sparing redundancy state fully redundant. Socket=%1 "
                       "Channel=%2 DIMM=%3 Domain=%4 Rank=%5.",
            .severity = "OK",
            .numberOfArgs = 5,
            .paramTypes =
                {
                    "number",
                    "string",
                    "number",
                    "string",
                    "number",
                },
            .resolution = "None.",
        }},
    MessageEntry{
        "SsbThermalTrip",
        {
            .description =
                "Indicates that an SSB Thermal trip has been asserted.",
            .message = "SSB Thermal trip.",
            .severity = "Critical",
            .numberOfArgs = 0,
            .paramTypes = {},
            .resolution = "None.",
        }},
    MessageEntry{"SystemPowerGoodFailed",
                 {
                     .description =
                         "Indicates that the system power good signal failed "
                         "to assert within the specified time (VR failure).",
                     .message = "System power good failed to assert within %1 "
                                "milliseconds (VR failure).",
                     .severity = "Critical",
                     .numberOfArgs = 1,
                     .paramTypes = {"number"},
                     .resolution = "None.",
                 }},
    MessageEntry{"SystemPowerLost",
                 {
                     .description = "Indicates that power was lost while the "
                                    "system was powered on.",
                     .message = "System Power Lost.",
                     .severity = "Critical",
                     .numberOfArgs = 0,
                     .paramTypes = {},
                     .resolution = "None.",
                 }},
    MessageEntry{
        "SystemPowerOffFailed",
        {
            .description = "Indicates that the system failed to power off.",
            .message = "System Power-Off Failed.",
            .severity = "Critical",
            .numberOfArgs = 0,
            .paramTypes = {},
            .resolution = "None.",
        }},
    MessageEntry{
        "SystemPowerOnFailed",
        {
            .description = "Indicates that the system failed to power on.",
            .message = "System Power-On Failed.",
            .severity = "Critical",
            .numberOfArgs = 0,
            .paramTypes = {},
            .resolution = "None.",
        }},
};
} // namespace redfish::message_registries::openbmc