Lines Matching +full:0 +full:x3c000000
29 #define LS1088ARDB_PB_BOARD 0x4A
34 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
39 #define CONFIG_SYS_FSL_QSPI_BASE 0x20000000
42 #define CONFIG_SYS_FSL_QSPI_BASE 0x20000000
43 #define CONFIG_ENV_OFFSET 0x300000 /* 3MB */
52 #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
53 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
55 #define CONFIG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL
75 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2)
86 * During booting, IFC is mapped at the region of 0x30000000.
89 * 0x30000000 - 0x37ffffff : 128MB : NOR flash
90 * 0x38000000 - 0x3BFFFFFF : 64MB : Promjet
91 * 0x3C000000 - 0x40000000 : 64MB : FPGA etc
95 * 0x5_1000_0000..0x5_1fff_ffff Memory Hole
96 * 0x5_2000_0000..0x5_3fff_ffff IFC CSx (FPGA, NAND and others 512MB)
97 * 0x5_4000_0000..0x5_7fff_ffff ASIC or others 1GB
98 * 0x5_8000_0000..0x5_bfff_ffff IFC CS0 1GB (NOR/Promjet)
99 * 0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet)
101 * For e.g. NOR flash at CS0 will be mapped to 0x580000000 after relocation.
105 * CONFIG_SYS_TEXT_BASE is linked to 0x30000000 for booting
108 #define CONFIG_SYS_FLASH_BASE 0x580000000ULL
109 #define CONFIG_SYS_FLASH_BASE_PHYS 0x80000000
110 #define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000
112 #define CONFIG_SYS_FLASH1_BASE_PHYS 0xC0000000
113 #define CONFIG_SYS_FLASH1_BASE_PHYS_EARLY 0x8000000
120 #define QIXIS_BASE_PHYS 0x20000000
121 #define QIXIS_BASE_PHYS_EARLY 0xC000000
124 #define CONFIG_SYS_NAND_BASE 0x530000000ULL
125 #define CONFIG_SYS_NAND_BASE_PHYS 0x30000000
130 #define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000
131 #define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000
132 #define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000
133 #define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000
134 #define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH 0x200000
135 #define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET 0x07000000
156 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
183 "hwconfig=fsl_ddr:bank_intlv=auto\0" \
184 "loadaddr=0x80100000\0" \
185 "kernel_addr=0x100000\0" \
186 "ramdisk_addr=0x800000\0" \
187 "ramdisk_size=0x2000000\0" \
188 "fdt_high=0xa0000000\0" \
189 "initrd_high=0xffffffffffffffff\0" \
190 "kernel_start=0x581000000\0" \
191 "kernel_load=0xa0000000\0" \
192 "kernel_size=0x2800000\0" \
193 "console=ttyAMA0,38400n8\0" \
194 "mcinitcmd=fsl_mc start mc 0x580a00000" \
195 " 0x580e00000 \0"
199 #define CONFIG_BOOTCOMMAND "sf probe 0:0;" \
200 "sf read 0x80001000 0xd00000 0x100000;"\
201 " fsl_mc lazyapply dpl 0x80001000 &&" \
205 #define CONFIG_BOOTCOMMAND "mmcinfo;mmc read 0x80001000 0x6800 0x800;"\
206 " fsl_mc lazyapply dpl 0x80001000 &&" \
210 #define CONFIG_BOOTCOMMAND "fsl_mc lazyapply dpl 0x580d00000 &&" \
225 #define CONFIG_SPL_BSS_START_ADDR 0x80100000
226 #define CONFIG_SPL_BSS_MAX_SIZE 0x00100000
228 #define CONFIG_SPL_MAX_SIZE 0x16000
229 #define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
231 #define CONFIG_SPL_TEXT_BASE 0x1800a000
233 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000
234 #define CONFIG_SYS_SPL_MALLOC_START 0x80200000
244 #define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
246 #define CONFIG_SYS_MONITOR_LEN 0x100000