include/configs/ls1043a_common.h

38 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
44 #define CONFIG_SYS_DDR_SDRAM_BASE	0x80000000
45 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY	0
47 #define CONFIG_SYS_DDR_BLOCK2_BASE      0x880000000ULL
67 #define CONFIG_SPL_TEXT_BASE		0x10000000
68 #define CONFIG_SPL_MAX_SIZE		0x17000
69 #define CONFIG_SPL_STACK		0x1001e000
70 #define CONFIG_SPL_PAD_TO		0x1d000
74 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
75 #define CONFIG_SPL_BSS_START_ADDR	0x8f000000
76 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
86 #define CONFIG_SYS_MONITOR_LEN		(0x100000 + CONFIG_U_BOOT_HDR_SIZE)
88 #define CONFIG_SYS_MONITOR_LEN		0x100000
95 #define CONFIG_SPL_TEXT_BASE		0x10000000
96 #define CONFIG_SPL_MAX_SIZE		0x1a000
97 #define CONFIG_SPL_STACK		0x1001d000
100 #define CONFIG_SYS_SPL_MALLOC_START	0x80200000
101 #define CONFIG_SPL_BSS_START_ADDR	0x80100000
102 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000
103 #define CONFIG_SPL_BSS_MAX_SIZE		0x80000
116 #define CONFIG_SYS_MONITOR_LEN		(0x100000 + CONFIG_U_BOOT_HDR_SIZE)
118 #define CONFIG_SYS_MONITOR_LEN		0x100000
132  * CONFIG_SYS_TEXT_BASE is linked to 0x60000000 for booting
134 #define CONFIG_SYS_FLASH_BASE			0x60000000
136 #define CONFIG_SYS_FLASH_BASE_PHYS_EARLY	0x00000000
183 #define CONFIG_SYS_FM_MURAM_SIZE	0x60000
186 #define CONFIG_SYS_FMAN_FW_ADDR		0x900000
187 #define CONFIG_SYS_QE_FW_ADDR		0x940000
192 /* Store Fman ucode at offeset 0x900000(72 blocks). */
197  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
199  * 0x2000 (16 blocks), 8 + 2040 + 16 = 2064, enlarge it to 18432(0x4800).
202 #define CONFIG_SYS_FMAN_FW_ADDR		(512 * 0x4800)
203 #define CONFIG_SYS_QE_FW_ADDR		(512 * 0x4A00)
206 #define CONFIG_SYS_FMAN_FW_ADDR		0x40900000
210 #define CONFIG_SYS_FMAN_FW_ADDR		0x60900000
211 #define CONFIG_SYS_QE_FW_ADDR		0x60940000
214 #define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
215 #define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
220 #define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
228 	func(MMC, mmc, 0) \
229 	func(USB, usb, 0) \
236 	"hwconfig=fsl_ddr:bank_intlv=auto\0"	\
237 	"fdt_high=0xffffffffffffffff\0"		\
238 	"initrd_high=0xffffffffffffffff\0"	\
239 	"fdt_addr=0x64f00000\0"		 	\
240 	"kernel_addr=0x61000000\0"		\
241 	"scriptaddr=0x80000000\0"		\
242 	"scripthdraddr=0x80080000\0"		\
243 	"fdtheader_addr_r=0x80100000\0"		\
244 	"kernelheader_addr_r=0x80200000\0"	\
245 	"kernel_addr_r=0x81000000\0"		\
246 	"kernel_start=0x1000000\0"		\
247 	"kernelheader_start=0x800000\0"		\
248 	"fdt_addr_r=0x90000000\0"		\
249 	"load_addr=0xa0000000\0"		\
250 	"kernelheader_addr=0x60800000\0"	\
251 	"kernel_size=0x2800000\0"		\
252 	"kernelheader_size=0x40000\0"		\
253 	"kernel_addr_sd=0x8000\0"		\
254 	"kernel_size_sd=0x14000\0"		\
255 	"kernelhdr_addr_sd=0x4000\0"		\
256 	"kernelhdr_size_sd=0x10\0"		\
257 	"console=ttyS0,115200\0"		\
258 	"boot_os=y\0"				\
259 	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"	\
261 	"boot_scripts=ls1043ardb_boot.scr\0"	\
262 	"boot_script_hdr=hdr_ls1043ardb_bs.out\0"	\
272 		"done\0"			\
280 		"source ${scriptaddr}\0"			\
286 		"bootm $load_addr#$board\0"	\
292 		"bootm $load_addr#$board\0"	    \
298 		"bootm $load_addr#$board\0"	\
305 		"bootm $load_addr#$board\0"