Lines Matching +full:0 +full:x00f00000

14 #define CONFIG_SYS_SDRAM_SIZE		0x40000000
16 #define CONFIG_SYS_MEMTEST_START	0x80000000
17 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
24 #define I2C_MUX_IO_ADDR		0x24
25 #define I2C_MUX_IO2_ADDR	0x25
26 #define I2C_MUX_IO_0		0
28 #define SW_BOOT_MASK		0x03
29 #define SW_BOOT_EMU		0x02
30 #define SW_BOOT_BANK1		0x00
31 #define SW_BOOT_BANK2		0x01
32 #define SW_REV_MASK		0xF8
33 #define SW_REV_A		0xF8
34 #define SW_REV_B		0xF0
35 #define SW_REV_C		0xE8
36 #define SW_REV_C1		0xE0
37 #define SW_REV_C2		0xD8
38 #define SW_REV_D		0xD0
39 #define SW_REV_E		0xC8
40 #define __PHY_MASK		0xF9
41 #define __PHY_ETH2_MASK		0xFB
42 #define __PHY_ETH1_MASK		0xFD
55 #define CONFIG_SYS_MEMTEST_START	0x80000000
56 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
60 	"verify=no\0"				\
61 	"fdt_high=0xffffffffffffffff\0"		\
62 	"initrd_high=0xffffffffffffffff\0"	\
63 	"fdt_addr=0x00f00000\0"			\
64 	"kernel_addr=0x01000000\0"		\
65 	"kernelheader_addr=0x800000\0"		\
66 	"scriptaddr=0x80000000\0"		\
67 	"scripthdraddr=0x80080000\0"		\
68 	"fdtheader_addr_r=0x80100000\0"		\
69 	"kernelheader_addr_r=0x80200000\0"	\
70 	"kernel_addr_r=0x81000000\0"		\
71 	"fdt_addr_r=0x90000000\0"		\
72 	"load_addr=0xa0000000\0"		\
73 	"kernel_size=0x2800000\0"		\
74 	"kernelheader_size=0x40000\0"		\
75 	"console=ttyS0,115200\0"		\
77 	"boot_scripts=ls1012ardb_boot.scr\0"	\
78 	"boot_script_hdr=hdr_ls1012ardb_bs.out\0"	\
88 	      "done\0"				\
95 		"\0"					  \
103 		"source ${scriptaddr}\0"	  \
104 	"installer=load mmc 0:2 $load_addr "	\
106 		   "bootm $load_addr#$board\0"	\
112 		"bootm $load_addr#$board\0"