configs/km/km_arm.h

42 #define CONFIG_SYS_MEMTEST_START 0x00400000	/* 4M */
43 #define CONFIG_SYS_MEMTEST_END	0x007fffff	/*(_8M -1) */
44 #define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
47 #define CONFIG_KM_PNVRAM	0x80000
49 #define CONFIG_KM_PHRAM		0x17F000
51 #define CONFIG_KM_CRAMFS_ADDR	0x2400000
52 #define CONFIG_KM_KERNEL_ADDR	0x2000000	/* 3098KBytes */
53 #define CONFIG_KM_FDT_ADDR	0x23E0000	/*  128KBytes */
58 		" boardid=0x${IVM_BoardId} hwkey=0x${IVM_HWKey}"
61 	"u-boot="CONFIG_HOSTNAME "/u-boot.kwb\0"		\
63 	"set_fdthigh=setenv fdt_high ${kernelmem}\0"			\
69 		"appended one; fi\0"					\
104 #define BOOTFLASH_START		0x0
117 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
124 #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
125 #define CONFIG_PHY_BASE_ADR	0
140 #define CONFIG_SYS_I2C_BUSES	{	{0, {I2C_NULL_HOP} }, \
141 					{0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
142 					{0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
143 					{0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
144 					{0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
145 					{0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
157 #define KM_KIRKWOOD_SOFT_I2C_GPIOS	0x0300
160 #define I2C_ACTIVE	__set_direction(KM_KIRKWOOD_SDA_PIN, 0)
162 #define I2C_READ	(kw_gpio_get_value(KM_KIRKWOOD_SDA_PIN) ? 1 : 0)
170 #define	CONFIG_SYS_I2C_SOFT_SLAVE	0x0
178 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
185 #define CONFIG_ENV_OFFSET		0xc0000     /* no bracets! */
186 #define CONFIG_ENV_SIZE			0x02000     /* Size of Environment */
187 #define CONFIG_ENV_SECT_SIZE		0x10000
190 #define CONFIG_ENV_TOTAL_SIZE		0x20000     /* no bracets! */
192 #define CONFIG_SYS_DEF_EEPROM_ADDR	0x50
195 #define CONFIG_ENV_OFFSET		0x0 /* no bracets! */
196 #define CONFIG_ENV_SIZE			(0x2000 - CONFIG_ENV_OFFSET)
198 #define CONFIG_ENV_OFFSET_REDUND	0x2000 /* no bracets! */
206 #define CONFIG_SYS_KW_SPI_MPP	0x0
208 #define FLASH_GPIO_PIN			0x00010000
213 		"sf probe 0;sf erase 0 +${filesize};"			\
214 		"sf write ${load_addr_r} 0 ${filesize};\0"
218 	"newenv=sf probe 0;"						\
220 		__stringify(CONFIG_ENV_TOTAL_SIZE)"\0"
223 	"newenv=setenv addr 0x100000 && "				\
225 		"mw.b ${addr} 0 4 && "					\
229 		" ${addr} " __stringify(CONFIG_ENV_OFFSET_REDUND) " 4\0"
243 	"arch=arm\0"							\
251 #define CONFIG_SYS_SDRAM_BASE		0x00000000
258 #define CONFIG_KM_RESERVED_PRAM 0x801000