include/configs/ge_bx50v3.h

43 #define CONFIG_DWC_AHSATA_PORT_ID	0
50 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
57 #define CONFIG_MXC_USB_FLAGS	0
78 #define CONFIG_LOADADDR	0x12000000
81 	"bootcause=POR\0" \
82 	"image=/boot/fitImage\0" \
83 	"fdt_high=0xffffffff\0" \
84 	"dev=mmc\0" \
85 	"devnum=1\0" \
86 	"rootdev=mmcblk0p\0" \
87 	"quiet=quiet loglevel=0\0" \
88 	"console=" CONSOLE_DEV "\0" \
93 		"${videoargs}" "\0" \
95 		"if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \
96 			"then setenv quiet; fi\0" \
98 		"ext2load ${dev} ${devnum}:${partnum} 0x7000A000 " \
99 		"/boot/bootcause/firstboot\0" \
101 		"setexpr partnum 3 - ${partnum}\0" \
109 		"mw.b 0x7000A000 0xbc; " \
110 		"mw.b 0x7000A001 0x00; " \
111 		"ext4write ${dev} ${devnum}:5 0x7000A000 /boot/failures 2\0" \
115 		"run hasfirstboot || setenv partnum 0; " \
116 		"if test ${partnum} != 0; then " \
120 		"run failbootcmd\0" \
122 		"ext2load ${dev} ${devnum}:${partnum} ${loadaddr} ${image}\0" \
126 		"bootm ${loadaddr}#conf@${confidx}\0" \
130 		"setenv partnum 0 && echo MISSING IMAGE;" \
132 		"run failbootcmd\0" \
153 #define CONFIG_SYS_MEMTEST_START       0x10000000
154 #define CONFIG_SYS_MEMTEST_END         0x10010000
155 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
184 #define CONFIG_SYS_CONSOLE_FG_COL 0xFF
185 #define CONFIG_SYS_CONSOLE_BG_COL 0x00
204 #define CONFIG_SYS_I2C_RTC_ADDR	0x32
216 #define CONFIG_SYS_I2C_BUSES	{	{0, {I2C_NULL_HOP} }, \
219 					{0, {{I2C_MUX_PCA9547, 0x70, 0} } }, \
220 					{0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
221 					{0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
222 					{0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
223 					{0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
224 					{0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
225 					{0, {{I2C_MUX_PCA9547, 0x70, 6} } }, \
226 					{0, {{I2C_MUX_PCA9547, 0x70, 7} } }, \