include/configs/dragonboard410c.h

1 /* SPDX-License-Identifier: GPL-2.0+ */
3  * Board configuration file for Dragonboard 410C
12 #include <asm/arch/sysmap-apq8016.h>
15 #define PHYS_SDRAM_1			0x80000000
17 #define PHYS_SDRAM_1_SIZE		0x3da00000
19 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x7fff0)
20 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x80000)
28 #define CONFIG_SYS_LDSCRIPT "board/qualcomm/dragonboard410c/u-boot.lds"
30 /* Fixup - in init code we switch from device to host mode,
38 /* Disabled by default as some sub-commands can brick eMMC */
45 	func(USB, usb, 0) \
47 	func(MMC, mmc, 0) \
54 "part start mmc 0 "#part" start && "\
55 "part size mmc 0 "#part" size && "\
60 "mmc dev 0 && "\
63 "tftp $loadaddr dragonboard/rescue/gpt_both0.bin && "\
64 "mmc write $loadaddr 0 43 && " \
66 REFLASH(dragonboard/rescue/NON-HLOS.bin, 1)\
67 REFLASH(dragonboard/rescue/sbl1.mbn, 2)\
68 REFLASH(dragonboard/rescue/rpm.mbn, 3)\
69 REFLASH(dragonboard/rescue/tz.mbn, 4)\
70 REFLASH(dragonboard/rescue/hyp.mbn, 5)\
71 REFLASH(dragonboard/rescue/sec.dat, 6)\
72 REFLASH(dragonboard/rescue/emmc_appsboot.mbn, 7)\
73 REFLASH(dragonboard/u-boot.img, 8)\
79 	"reflash="CONFIG_ENV_REFLASH"\0"\
80 	"loadaddr=0x81000000\0" \
81 	"fdt_high=0xffffffffffffffff\0" \
82 	"initrd_high=0xffffffffffffffff\0" \
83 	"linux_image=Image\0" \
84 	"kernel_addr_r=0x81000000\0"\
85 	"fdtfile=qcom/apq8016-sbc.dtb\0" \
86 	"fdt_addr_r=0x83000000\0"\
87 	"ramdisk_addr_r=0x84000000\0"\
88 	"scriptaddr=0x90000000\0"\
89 	"pxefile_addr_r=0x90100000\0"\
92 #define CONFIG_ENV_SIZE			0x2000
93 #define CONFIG_SYS_MMC_ENV_DEV		0	/* mmc0 = emmc, mmc1 = sd */
94 #define CONFIG_SYS_MMC_ENV_PART 2 /* Set env partition to BOOT2 partition */