include/configs/cm_fx6.h

27 #define CONFIG_SYS_MEMTEST_START	0x10000000
28 #define CONFIG_SYS_MEMTEST_END		0x10010000
55 	"fdt_high=0xffffffff\0" \
56 	"initrd_high=0xffffffff\0" \
57 	"fdt_addr_r=0x18000000\0" \
58 	"ramdisk_addr_r=0x13000000\0" \
59 	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
60 	"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
61 	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
62 	"fdtfile=undefined\0" \
63 	"stdin=serial,usbkbd\0" \
64 	"stdout=serial,vga\0" \
65 	"stderr=serial,vga\0" \
66 	"panel=HDMI\0" \
67 	"autoload=no\0" \
68 	"uImage=uImage-cm-fx6\0" \
69 	"zImage=zImage-cm-fx6\0" \
70 	"kernel=uImage-cm-fx6\0" \
71 	"dtb=cm-fx6.dtb\0" \
72 	"console=ttymxc3,115200\0" \
73 	"ethprime=FEC0\0" \
74 	"video_hdmi=mxcfb0:dev=hdmi,1920x1080M-32@50,if=RGB32\0" \
75 	"video_dvi=mxcfb0:dev=dvi,1280x800M-32@50,if=RGB32\0" \
76 	"doboot=bootm ${kernel_addr_r}\0" \
77 	"doloadfdt=false\0" \
78 	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
79 	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
82 		"setenv doloadfdt true;\0" \
85 		"setenv doloadfdt false;\0"\
86 	"mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
87 	"sataroot=/dev/sda2 rw rootwait\0" \
88 	"nandroot=/dev/mtdblock4 rw\0" \
89 	"nandrootfstype=ubifs\0" \
91 		"${video} ${extrabootargs}\0" \
93 		"${video} ${extrabootargs}\0" \
97 		"${video} ${extrabootargs}\0" \
104 		"fi;\0" \
107 		"mmc rescan && mmc read 10042000 a 400 && go 10042000\0" \
108 	"loadkernel=load ${storagetype} ${storagedev} ${kernel_addr_r} ${kernel};\0"\
109 	"loadfdt=load ${storagetype} ${storagedev} ${fdt_addr_r} ${dtb};\0" \
110 	"nandloadkernel=nand read ${kernel_addr_r} 0 780000;\0" \
111 	"nandloadfdt=nand read ${fdt_addr_r} 780000 80000;\0" \
112 	"setupmmcboot=setenv storagetype mmc; setenv storagedev 2;\0" \
113 	"setupsataboot=setenv storagetype sata; setenv storagedev 0;\0" \
114 	"setupnandboot=setenv storagetype nand;\0" \
116 			"run ${storagetype}args; run doboot;\0" \
122 		"fi;\0" \
127 		"run trybootk;\0" \
139 		"run nandboot;\0" \
144 			"echo WARNING: Could not determine dtb to use; fi; \0" \
150 	func(USB, usb, 0) \
152 	func(SATA, sata, 0)
161 #define CONFIG_SYS_NAND_BASE		0x40000000
170 #define CONFIG_FEC_MXC_PHYADDR		0
180 #define CONFIG_MXC_USB_FLAGS		0
193 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
200 #define CONFIG_DWC_AHSATA_PORT_ID	0