Lines Matching +full:tpl +full:- +full:support

20 	  while U-Boot is running, but once U-Boot exits it will not be
21 	  stored. U-Boot will therefore always start up with a default
31 	  - CONFIG_ENV_OFFSET:
32 	  - CONFIG_ENV_SIZE:
41 	  - CONFIG_ENV_EEPROM_IS_ON_I2C
45 	  - CONFIG_I2C_ENV_EEPROM_BUS
88 	   "embedded" in the text segment with the U-Boot code. This
94 	   4 kB sectors - with U-Boot code before and after it. With
97 	   between U-Boot and the environment.
131 	   when your environment is "embedded" within U-Boot code,
133 	   for U-Boot code. It should be pointed out that this is
149 	  source code will make it necessary to adapt <board>/u-boot.lds*
217 	  - CONFIG_ENV_OFFSET:
218 	  - CONFIG_ENV_SIZE:
224 	  - CONFIG_ENV_OFFSET_REDUND (optional):
232 	  - CONFIG_ENV_RANGE (optional):
240 	  - CONFIG_ENV_OFFSET_OOB (optional):
242 	  Enables support for dynamically retrieving the offset of the
243 	  environment from block zero's out-of-band data.  The
249 	bool "Environment in a non-volatile RAM"
252 	  Define this if you have some non-volatile memory device
256 	  - CONFIG_ENV_ADDR:
257 	  - CONFIG_ENV_SIZE:
271 	  - CONFIG_ENV_ADDR:
272 	  - CONFIG_ENV_SIZE:
286 	  - CONFIG_ENV_ADDR:
287 	  - CONFIG_ENV_SIZE:
308 	  - CONFIG_ENV_OFFSET:
309 	  - CONFIG_ENV_SIZE:
315 	  - CONFIG_ENV_SECT_SIZE:
319 	  - CONFIG_ENV_OFFSET_REDUND (optional):
384 	  environment.  This has the benefit of wear-leveling the environment
387 	  - CONFIG_ENV_UBI_PART:
391 	  - CONFIG_ENV_UBI_VOLUME:
396 	  - CONFIG_ENV_UBI_VOLUME_REDUND:
415 	default "0:auto" if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA = -1
416 	default "1:auto" if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA != -1
423 	       - "D:P": device D partition P. Error occurs if device D has no
425 	       - "D:0": device D.
426 	       - "D" or "D:": device D partition 1 if device D has partition
429 	       - "D:auto": first partition in device D with bootable flag set.
455 	       - "D:P": device D partition P. Error occurs if device D has no
457 	       - "D:0": device D.
458 	       - "D" or "D:": device D partition 1 if device D has partition
461 	       - "D:auto": first partition in device D with bootable flag set.
497 	hex "Environment Sector-Size"
537 	bool "Add run-time information to the environment"
540 	  run-time determined information about the hardware to the
603 	bool "TPL Environment is not stored"
606 	  Similar to ENV_IS_NOWHERE, used for TPL environment.
609 	bool "TPL Environment in an MMC device"
614 	  Similar to ENV_IS_IN_MMC, used for TPL environment.
617 	bool "TPL Environment is in a FAT filesystem"
622 	  Similar to ENV_IS_IN_FAT, used for TPL environment.
625 	bool "TPL Environment is in a EXT4 filesystem"
630 	  Similar to ENV_IS_IN_EXT4, used for TPL environment.
633 	bool "TPL Environment in a NAND device"
638 	  Similar to ENV_IS_IN_NAND, used for TPL environment.
641 	bool "TPL Environment is in SPI flash"
646 	  Similar to ENV_IS_IN_SPI_FLASH, used for TPL environment.
649 	bool "TPL Environment in flash memory"
654 	  Similar to ENV_IS_IN_FLASH, used for TPL environment.