Lines Matching +full:chip +full:- +full:relative

20 	  while U-Boot is running, but once U-Boot exits it will not be
21 	  stored. U-Boot will therefore always start up with a default
31 	  - CONFIG_ENV_OFFSET:
32 	  - CONFIG_ENV_SIZE:
39 	  in the chip address.
41 	  - CONFIG_ENV_EEPROM_IS_ON_I2C
45 	  - CONFIG_I2C_ENV_EEPROM_BUS
88 	   "embedded" in the text segment with the U-Boot code. This
94 	   4 kB sectors - with U-Boot code before and after it. With
97 	   between U-Boot and the environment.
106 	   CONFIG_ENV_OFFSET is used relative to CONFIG_SYS_FLASH_BASE.
131 	   when your environment is "embedded" within U-Boot code,
133 	   for U-Boot code. It should be pointed out that this is
149 	  source code will make it necessary to adapt <board>/u-boot.lds*
180 	  If offset is positive (the usual case), it is treated as relative to
182 	  as relative to the end of the MMC partition. This can be useful if
217 	  - CONFIG_ENV_OFFSET:
218 	  - CONFIG_ENV_SIZE:
224 	  - CONFIG_ENV_OFFSET_REDUND (optional):
232 	  - CONFIG_ENV_RANGE (optional):
240 	  - CONFIG_ENV_OFFSET_OOB (optional):
243 	  environment from block zero's out-of-band data.  The
249 	bool "Environment in a non-volatile RAM"
252 	  Define this if you have some non-volatile memory device
256 	  - CONFIG_ENV_ADDR:
257 	  - CONFIG_ENV_SIZE:
271 	  - CONFIG_ENV_ADDR:
272 	  - CONFIG_ENV_SIZE:
286 	  - CONFIG_ENV_ADDR:
287 	  - CONFIG_ENV_SIZE:
308 	  - CONFIG_ENV_OFFSET:
309 	  - CONFIG_ENV_SIZE:
315 	  - CONFIG_ENV_SECT_SIZE:
319 	  - CONFIG_ENV_OFFSET_REDUND (optional):
338 	  Value the SPI bus and chip select for environment.
341 	bool "SPI flash chip select for environment"
344 	  Force the SPI chip select for environment.
348 	int "Value of SPI flash chip select for environment"
351 	  Value of the SPI chip select for environment.
384 	  environment.  This has the benefit of wear-leveling the environment
387 	  - CONFIG_ENV_UBI_PART:
391 	  - CONFIG_ENV_UBI_VOLUME:
396 	  - CONFIG_ENV_UBI_VOLUME_REDUND:
415 	default "0:auto" if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA = -1
416 	default "1:auto" if ARCH_SUNXI && MMC_SUNXI_SLOT_EXTRA != -1
423 	       - "D:P": device D partition P. Error occurs if device D has no
425 	       - "D:0": device D.
426 	       - "D" or "D:": device D partition 1 if device D has partition
429 	       - "D:auto": first partition in device D with bootable flag set.
455 	       - "D:P": device D partition P. Error occurs if device D has no
457 	       - "D:0": device D.
458 	       - "D" or "D:": device D partition 1 if device D has partition
461 	       - "D:auto": first partition in device D with bootable flag set.
497 	hex "Environment Sector-Size"
537 	bool "Add run-time information to the environment"
540 	  run-time determined information about the hardware to the