145 	usbdbg("stall ep: %d", ep_num);  in udc_stall_ep()
266 		usbdbg("EP0 OUT packet ACK, sent zero-length packet");  in aspeed_udc_ep0_out()
287 	usbdbg("urb->buffer: %p, buffer_length: %d, actual_length: %d, sent:%d",  in aspeed_udc_ep0_tx()
297 		usbdbg("send address %x", (u32)cp);  in aspeed_udc_ep0_tx()
307 		usbdbg("ep sent: %d, tx_packetSize: %d, last: %d",  in aspeed_udc_ep0_tx()
324 	usbdbg("aspeed_udc_ep0_in");  in aspeed_udc_ep0_in()
333 		usbdbg("ACK on EP0 control write status stage packet");  in aspeed_udc_ep0_in()
360 			usbdbg("control read data stage complete");  in aspeed_udc_ep0_in()
372 			usbdbg("ACK control read data stage packet");  in aspeed_udc_ep0_in()
384 	usbdbg("-> Entering device setup");  in aspeed_udc_setup_handle()
402 			usbdbg("set addr: %x", ep0_urb->device_request.wValue);  in aspeed_udc_setup_handle()
411 			usbdbg("set configuration");  in aspeed_udc_setup_handle()
432 		usbdbg("control read on EP0");  in aspeed_udc_setup_handle()
443 	usbdbg("<- Leaving device setup");  in aspeed_udc_setup_handle()
456 		usbdbg("ISR_BUS_RESET");  in udc_irq()
462 		usbdbg("ISR_BUS_SUSPEND");  in udc_irq()
468 		usbdbg("ISR_SUSPEND_RESUME");  in udc_irq()
496 		usbdbg("SETUP");  in udc_irq()
541 		usbdbg("ISR_EP_NAK");  in udc_irq()
575 	usbdbg("setting up endpoint id: %d", id);  in udc_setup_ep()
598 	usbdbg("addr %x, num %d, dir %s, type %s, packet size %d",  in udc_setup_ep()
654 	usbdbg("UDC connect");  in udc_connect()
662 	usbdbg("UDC disconnect");  in udc_disconnect()
669 	usbdbg("enable UDC");  in udc_enable()
681 	usbdbg("disable UDC");  in udc_disable()
696 	usbdbg("udc_startup_events");  in udc_startup_events()
711 	usbdbg("udc_init");  in udc_init()