Kconfig - OpenGrok cross reference for /openbmc/u-boot/drivers/serial/Kconfig

11 	  Select a default baudrate, where "default" has a driver-specific
37 	bool "Provide a serial driver"
41 	  In very space-constrained devices even the full UART driver is too
44 	  the full UART driver will be omitted, thus saving space.
47 	bool "Provide a serial driver in SPL"
51 	  In very space-constrained devices even the full UART driver is too
54 	  the full UART driver will be omitted, thus saving space.
57 	bool "Provide a serial driver in TPL"
61 	  In very space-constrained devices even the full UART driver is too
64 	  the full UART driver will be omitted, thus saving space.
104 	  Enable driver model for serial. This replaces
113 	  Enable RX buffer support for the serial driver. This enables
141 	  Enable driver model for serial in SPL. This replaces
151 	  Enable driver model for serial in TPL. This replaces
175 	  support quite easily. Remember that you cannot use driver model and
178 	  You must not use this UART once driver model is working and the
190 	  Select this to enable a debug UART using the altera_jtag_uart driver.
191 	  You will need to provide parameters to make this work. The driver will
192 	  be available until the real driver model serial is running.
197 	  Select this to enable a debug UART using the altera_uart driver.
198 	  You will need to provide parameters to make this work. The driver will
199 	  be available until the real driver model serial is running.
205 	  Select this to enable a debug UART using the ar933x uart driver.
207 	  driver will be available until the real driver model serial is
214 	  Select this to enable a debug UART using the ARC UART driver.
216 	  driver will be available until the real driver model serial is
222 	  Select this to enable a debug UART using the atmel usart driver. You
223 	  will need to provide parameters to make this work. The driver will
224 	  be available until the real driver-model serial is running.
231 	  will need to provide parameters to make this work. The driver will
232 	  be available until the real driver model serial is running.
237 	  Select this to enable a debug UART using the ns16550 driver. You
238 	  will need to provide parameters to make this work. The driver will
239 	  be available until the real driver model serial is running.
253 	  Select this to enable a debug UART using the serial_s5p driver. You
254 	  will need to provide parameters to make this work. The driver will
255 	  be available until the real driver-model serial is running.
261 	  Select this to enable a debug UART using the serial_meson driver. You
262 	  will need to provide parameters to make this work. The driver will
263 	  be available until the real driver-model serial is running.
268 	  Select this to enable a debug UART using the serial_uartlite driver.
269 	  You will need to provide parameters to make this work. The driver will
270 	  be available until the real driver-model serial is running.
286 	  Select this to enable a debug UART using the serial_mvebu driver. You
287 	  will need to provide parameters to make this work. The driver will
288 	  be available until the real driver-model serial is running.
293 	  Select this to enable a debug UART using the serial_zynq driver. You
294 	  will need to provide parameters to make this work. The driver will
295 	  be available until the real driver-model serial is running.
301 	  Select this to enable a debug UART using the serial_leon3 driver. You
302 	  will need to provide parameters to make this work. The driver will
303 	  be available until the real driver model serial is running.
308 	  Select this to enable a debug UART using the pl01x driver with the
310 	  work. The driver will be available until the real driver model
316 	  Select this to enable a debug UART using the pl01x driver with the
318 	  work. The driver will be available until the real driver model
325 	  Select this to enable a debug UART using the serial_pic32 driver. You
326 	  will need to provide parameters to make this work. The driver will
327 	  be available until the real driver model serial is running.
333 	  Select this to enable a debug UART using the serial_mxc driver. You
334 	  will need to provide parameters to make this work. The driver will
335 	  be available until the real driver model serial is running.
341 	  Select this to enable the debug UART using the sandbox driver. This
343 	  start up driver model. The driver will be available until the real
344 	  driver model serial is running.
349 	  Select this to enable a debug UART using the serial_sifive driver. You
350 	  will need to provide parameters to make this work. The driver will
351 	  be available until the real driver-model serial is running.
357 	  Select this to enable a debug UART using the serial_stm32 driver
359 	  The driver will be available until the real driver model
368 	  driver will be available until the real driver-model serial is
374 	  Select this to enable a debug UART using the omap ns16550 driver.
375 	  You will need to provide parameters to make this work. The driver
376 	  will be available until the real driver model serial is running.
383 	  UART driver.
385 	  driver will be available until the real driver model serial is
493 	  devices. This driver uses driver model and requires a device
523 	  Select this to enable an overriding PL011 driver for BCM283X SoCs
550 	  Choose this option to add support for UART driver on the Marvell
591 	  This uses the ns16550 driver as a library.
594 	bool "ARM PL010 driver"
600 	bool "ARM PL011 driver"
606 	bool "ARM PL010 and PL011 driver"
617 	  This uses the ns16550 driver, converting the platdata from of-platdata
706 	  This driver supports the SiFive UART. If unsure say N.
728 	  This driver supports the Cadence UART. It is found e.g. in Xilinx
736 	  devices. This driver uses driver model and requires a device
742 	bool "Console driver for MPC8XX"