Kconfig - OpenGrok cross reference for /openbmc/u-boot/drivers/power/Kconfig

19 	---help---
27 	---help---
36 	---help---
45 	---help---
54 	---help---
62 	---help---
69 	---help---
80 	---help---
83 	generic 3.3V IO voltage for external devices like the lcd-panal and
85 	save battery. On A31 devices dcdc1 is also used for VCC-IO. On A83T
86 	dcdc1 is used for VCC-IO, nand, usb0, sd , etc. On A80 dcdc1 normally
97 	---help---
100 	On A10(s) / A13 / A20 boards dcdc2 is VDD-CPU and should be 1.4V.
101 	On A31 boards dcdc2 is used for VDD-GPU and should be 1.2V.
102 	On A23/A33 boards dcdc2 is used for VDD-SYS and should be 1.1V.
104 	On A83T boards dcdc2 is used for VDD-CPUA(cluster 0) and should be 0.9V.
105 	On R40 boards dcdc2 is VDD-CPU and should be 1.1V
115 	---help---
118 	On A10(s) / A13 / A20 boards with an axp209 dcdc3 is VDD-INT-DLL and
120 	On A10s boards with an axp152 dcdc3 is VCC-DRAM and should be 1.5V.
121 	On A23 / A31 / A33 boards dcdc3 is VDD-CPU and should be 1.2V.
122 	On A80 boards dcdc3 is used for VDD-CPUA(cluster 0) and should be 0.9V.
123 	On A83T boards dcdc3 is used for VDD-CPUB(cluster 1) and should be 0.9V.
124 	On R40 boards dcdc3 is VDD-SYS and VDD-GPU and should be 1.1V.
133 	---help---
136 	On A10s boards with an axp152 dcdc4 is VDD-INT-DLL and should be 1.25V.
137 	On A31 boards dcdc4 is used for VDD-SYS and should be 1.2V.
139 	On A80 boards dcdc4 powers VDD-SYS, HDMI, USB OTG and should be 0.9V.
140 	On A83T boards dcdc4 is used for VDD-GPU.
146 	---help---
149 	On A23 / A31 / A33 / A80 / A83T / R40 boards dcdc5 is VCC-DRAM and
158 	---help---
162 	On A23 / A33 boards aldo1 is used for VCC-IO and should be 3.0V.
174 	---help---
180 	On A23 / A33 boards aldo2 is used for VDD-DLL and should be 2.5V.
182 	On A83T / H8 boards aldo2 powers VDD-DLL, VCC18-PLL, CPVDD, VDD18-ADC,
190 	---help---
194 	On A23 / A31 / A33 / R40 boards aldo3 is VCC-PLL and AVCC and should
197 	On A83T / H8 boards aldo3 is AVCC, VCC-PL, and VCC-LED, and should be
204 	---help---
213 	---help---
219 	---help---
226 	---help---
238 	---help---
247 	---help---
256 	---help---
267 	---help---
276 	---help---
284 	---help---
292 	---help---
300 	---help---
309 	---help---
320 	---help---
323 	On A83T / H8 boards fldo1 is VCC-HSIC and should be 1.2V if HSIC is
330 	---help---
333 	On A83T / H8 boards fldo2 is VCC-CPUS and should be 0.9V.
339 	---help---
347 	---help---
354 	---help---
356 	is typically used to power the VDD-CPU and should be 1200mV.
363 	---help---