Lines Matching full:used
82 disable dcdc1. On A23 / A31 / A33 (axp221) boards dcdc1 is used for
85 save battery. On A31 devices dcdc1 is also used for VCC-IO. On A83T
86 dcdc1 is used for VCC-IO, nand, usb0, sd , etc. On A80 dcdc1 normally
101 On A31 boards dcdc2 is used for VDD-GPU and should be 1.2V.
102 On A23/A33 boards dcdc2 is used for VDD-SYS and should be 1.1V.
104 On A83T boards dcdc2 is used for VDD-CPUA(cluster 0) and should be 0.9V.
122 On A80 boards dcdc3 is used for VDD-CPUA(cluster 0) and should be 0.9V.
123 On A83T boards dcdc3 is used for VDD-CPUB(cluster 1) and should be 0.9V.
137 On A31 boards dcdc4 is used for VDD-SYS and should be 1.2V.
140 On A83T boards dcdc4 is used for VDD-GPU.
150 should be 1.5V, 1.35V if DDR3L is used.
161 On A31 boards aldo1 is often used to power the wifi module.
162 On A23 / A33 boards aldo1 is used for VCC-IO and should be 3.0V.
164 On A83T / H8 boards aldo1 is used for MIPI CSI, DSI, HDMI, EFUSE, and
179 On A31 boards aldo2 may be used for LPDDR2 then it should be 1.8V.
180 On A23 / A33 boards aldo2 is used for VDD-DLL and should be 2.5V.
196 On A80 boards aldo3 is normally not used.
258 disable dldo1. On sun6i (A31) boards with ethernet dldo1 is often used
260 used to power the wifi.
311 disable eldo3. On some A31(s) tablets it might be used to supply
324 used.
356 is typically used to power the VDD-CPU and should be 1200mV.
365 GPIO and it is commonly used with the OMAP3 family of processors