Lines Matching full:mv

81 	Set the voltage (mV) to program the axp pmic dcdc1 at, set to 0 to
98 	Set the voltage (mV) to program the axp pmic dcdc2 at, set to 0 to
116 	Set the voltage (mV) to program the axp pmic dcdc3 at, set to 0 to
134 	Set the voltage (mV) to program the axp pmic dcdc4 at, set to 0 to
147 	Set the voltage (mV) to program the axp pmic dcdc5 at, set to 0 to
159 	Set the voltage (mV) to program the axp pmic aldo1 at, set to 0 to
175 	Set the voltage (mV) to program the axp pmic aldo2 at, set to 0 to
191 	Set the voltage (mV) to program the axp pmic aldo3 at, set to 0 to
218 	bool "1.6 mV per uS"
220 	Increases the voltage by 1.6 mV per uS until the final voltage has
221 	been reached. Note that the scaling is in 25 mV steps and thus
222 	the slew rate in reality is about 25 mV/31.250 uS.
225 	bool "0.8 mV per uS"
227 	Increases the voltage by 0.8 mV per uS until the final voltage has
228 	been reached. Note that the scaling is in 25 mV steps however and thus
229 	the slew rate in reality is about 25 mV/15.625 uS.
248 	Set the voltage (mV) to program the axp pmic aldo4 at, set to 0 to
257 	Set the voltage (mV) to program the axp pmic dldo1 at, set to 0 to
268 	Set the voltage (mV) to program the axp pmic dldo2 at, set to 0 to
277 	Set the voltage (mV) to program the axp pmic dldo3 at, set to 0 to
285 	Set the voltage (mV) to program the axp pmic dldo4 at, set to 0 to
293 	Set the voltage (mV) to program the axp pmic eldo1 at, set to 0 to
301 	Set the voltage (mV) to program the axp pmic eldo2 at, set to 0 to
310 	Set the voltage (mV) to program the axp pmic eldo3 at, set to 0 to
321 	Set the voltage (mV) to program the axp pmic fldo1 at, set to 0 to
331 	Set the voltage (mV) to program the axp pmic fldo2 at, set to 0 to
340 	Set the voltage (mV) to program the axp pmic fldo3 at, set to 0 to
355 	Set the voltage (mV) to program the SY8106A pmic VOUT1. This
356 	is typically used to power the VDD-CPU and should be 1200mV.
357 	Values can range from 680mV till 1950mV.