Lines Matching +full:dll +full:- +full:config
17 config SUNXI_NO_PMIC
19 ---help---
22 config AXP152_POWER
27 ---help---
31 config AXP209_POWER
36 ---help---
40 config AXP221_POWER
45 ---help---
49 config AXP809_POWER
54 ---help---
57 config AXP818_POWER
62 ---help---
66 config SY8106A_POWER
69 ---help---
75 config AXP_DCDC1_VOLT
80 ---help---
83 generic 3.3V IO voltage for external devices like the lcd-panal and
85 save battery. On A31 devices dcdc1 is also used for VCC-IO. On A83T
86 dcdc1 is used for VCC-IO, nand, usb0, sd , etc. On A80 dcdc1 normally
89 config AXP_DCDC2_VOLT
97 ---help---
100 On A10(s) / A13 / A20 boards dcdc2 is VDD-CPU and should be 1.4V.
101 On A31 boards dcdc2 is used for VDD-GPU and should be 1.2V.
102 On A23/A33 boards dcdc2 is used for VDD-SYS and should be 1.1V.
104 On A83T boards dcdc2 is used for VDD-CPUA(cluster 0) and should be 0.9V.
105 On R40 boards dcdc2 is VDD-CPU and should be 1.1V
107 config AXP_DCDC3_VOLT
115 ---help---
118 On A10(s) / A13 / A20 boards with an axp209 dcdc3 is VDD-INT-DLL and
120 On A10s boards with an axp152 dcdc3 is VCC-DRAM and should be 1.5V.
121 On A23 / A31 / A33 boards dcdc3 is VDD-CPU and should be 1.2V.
122 On A80 boards dcdc3 is used for VDD-CPUA(cluster 0) and should be 0.9V.
123 On A83T boards dcdc3 is used for VDD-CPUB(cluster 1) and should be 0.9V.
124 On R40 boards dcdc3 is VDD-SYS and VDD-GPU and should be 1.1V.
126 config AXP_DCDC4_VOLT
133 ---help---
136 On A10s boards with an axp152 dcdc4 is VDD-INT-DLL and should be 1.25V.
137 On A31 boards dcdc4 is used for VDD-SYS and should be 1.2V.
139 On A80 boards dcdc4 powers VDD-SYS, HDMI, USB OTG and should be 0.9V.
140 On A83T boards dcdc4 is used for VDD-GPU.
142 config AXP_DCDC5_VOLT
146 ---help---
149 On A23 / A31 / A33 / A80 / A83T / R40 boards dcdc5 is VCC-DRAM and
152 config AXP_ALDO1_VOLT
158 ---help---
162 On A23 / A33 boards aldo1 is used for VCC-IO and should be 3.0V.
167 config AXP_ALDO2_VOLT
174 ---help---
180 On A23 / A33 boards aldo2 is used for VDD-DLL and should be 2.5V.
182 On A83T / H8 boards aldo2 powers VDD-DLL, VCC18-PLL, CPVDD, VDD18-ADC,
185 config AXP_ALDO3_VOLT
190 ---help---
194 On A23 / A31 / A33 / R40 boards aldo3 is VCC-PLL and AVCC and should
197 On A83T / H8 boards aldo3 is AVCC, VCC-PL, and VCC-LED, and should be
204 ---help---
211 config AXP_ALDO3_VOLT_SLOPE_NONE
213 ---help---
217 config AXP_ALDO3_VOLT_SLOPE_16
219 ---help---
224 config AXP_ALDO3_VOLT_SLOPE_08
226 ---help---
234 config AXP_ALDO3_INRUSH_QUIRK
238 ---help---
243 config AXP_ALDO4_VOLT
247 ---help---
252 config AXP_DLDO1_VOLT
256 ---help---
262 config AXP_DLDO2_VOLT
267 ---help---
272 config AXP_DLDO3_VOLT
276 ---help---
280 config AXP_DLDO4_VOLT
284 ---help---
288 config AXP_ELDO1_VOLT
292 ---help---
296 config AXP_ELDO2_VOLT
300 ---help---
304 config AXP_ELDO3_VOLT
309 ---help---
316 config AXP_FLDO1_VOLT
320 ---help---
323 On A83T / H8 boards fldo1 is VCC-HSIC and should be 1.2V if HSIC is
326 config AXP_FLDO2_VOLT
330 ---help---
333 On A83T / H8 boards fldo2 is VCC-CPUS and should be 0.9V.
335 config AXP_FLDO3_VOLT
339 ---help---
343 config AXP_SW_ON
347 ---help---
350 config SY8106A_VOUT1_VOLT
354 ---help---
356 is typically used to power the VDD-CPU and should be 1200mV.
359 config TWL4030_POWER
363 ---help---