560 	default:  in e1000_init_eeprom_params()
571 			/* Set to default value for initial eeprom read. */  in e1000_init_eeprom_params()
1309 	default:  in e1000_is_second_port()
1473 		default:  in e1000_set_mac_type()
1585 	default:  in e1000_set_mac_type()
1822 		default:  in e1000_initialize_hardware_bits()
1933 	default:  in e1000_init_hw()
1998 	default:  in e1000_init_hw()
2080 	 * that determine the hardware's default PAUSE (flow control) mode,  in e1000_setup_link()
2101 		default:  in e1000_setup_link()
2158 	 * registers to their default values.  This is done even if flow  in e1000_setup_link()
2175 	 * these registers will be set to a default threshold that may be  in e1000_setup_link()
2275 	default:  in e1000_setup_fiber_link()
2722 		default:  in e1000_copper_link_igp_setup()
2743 		  * resolution as hardware default. */  in e1000_copper_link_igp_setup()
2788 		default:  in e1000_copper_link_igp_setup()
2903 		 *   MDI/MDI-X = 0 (default)  in e1000_copper_link_ggp_setup()
2924 		default:  in e1000_copper_link_ggp_setup()
2930 		 *   disable_polarity_correction = 0 (default)  in e1000_copper_link_ggp_setup()
3045 	 *   MDI/MDI-X = 0 (default)  in e1000_copper_link_mgp_setup()
3064 	default:  in e1000_copper_link_mgp_setup()
3070 	 *   disable_polarity_correction = 0 (default)  in e1000_copper_link_mgp_setup()
3138 	 * parameter.  If this variable is zero, then set it to the default.  in e1000_copper_link_autoneg()
3262 	default:  in e1000_setup_copper_link()
3281 	default:  in e1000_setup_copper_link()
3464 	default:  in e1000_phy_setup_autoneg()
3619 	default:  in e1000_force_mac_fc()
4550 	default:  in e1000_get_phy_cfg_done()
4723 		default:  in e1000_phy_init_script()
4807 	default:  in e1000_phy_reset()
4869 	default:  in e1000_set_phy_type()
4976 	default:  in e1000_detect_gig_phy()
5018 	default:  in e1000_set_media_type()
5033 		default:  in e1000_set_media_type()
5089 	default:  in e1000_sw_init()
5183 	/* Set the default values for the Tx Inter Packet Gap timer */  in e1000_configure_tx()
5191 	/* Set the default values for the Tx Inter Packet Gap timer */  in e1000_configure_tx()
5203 	default:  in e1000_configure_tx()
5482 	default:  in e1000_get_bus_type()