34 	printf("\noffset: phy_adr, value: 0x%x\n", readl(&regs->phyadr));  in eth_dump_regs()
35 	printf("offset: smi, value: 0x%x\n", readl(&regs->smi));  in eth_dump_regs()
37 		printf("offset: 0x%x, value: 0x%x\n",  in eth_dump_regs()
76 		printf("ARMD100 FEC: (%s) Invalid phy address: 0x%X\n",  in smi_reg_read()
81 		printf("ARMD100 FEC: (%s) Invalid register offset: 0x%X\n",  in smi_reg_read()
88 		printf("ARMD100 FEC: (%s) PHY busy timeout\n",	__func__);  in smi_reg_read()
97 		printf("ARMD100 FEC: (%s) PHY Read timeout, val=0x%x\n",  in smi_reg_read()
121 		printf("ARMD100 FEC: (%s) Invalid phy address\n", __func__);  in smi_reg_write()
125 		printf("ARMD100 FEC: (%s) Invalid register offset\n", __func__);  in smi_reg_write()
131 		printf("ARMD100 FEC: (%s) PHY busy timeout\n",	__func__);  in smi_reg_write()
169 		printf("ARMD100 FEC: (%s) DMA Stuck\n", __func__);  in abortdma()
304 			printf("ARMD100 FEC: (%s) table section is full\n",  in add_del_hash_entry()
495 		printf("ARMD100 FEC: PHY not detected at address range 0-31\n");  in armdfec_init()
515 	printf("ARMD100 FEC: No link on %s\n", dev->name);  in armdfec_init()
557 			printf("ARMD100 FEC: Non-aligned data too large (%d)\n",  in armdfec_send()
585 			printf("ARMD100 FEC: (%s) in xmit packet\n", __func__);  in armdfec_send()
590 			printf("ARMD100 FEC: (%s) xmit packet timeout!\n",  in armdfec_send()
634 		printf("ARMD100 FEC: (%s) Dropping packet spread on"  in armdfec_recv()
637 		printf("ARMD100 FEC: (%s) Dropping packet with errors\n",  in armdfec_recv()
735 	printf("AMD100 FEC: (%s) Failed to allocate memory\n", __func__);  in armada100_fec_register()