Kconfig - OpenGrok cross reference for /openbmc/u-boot/drivers/misc/Kconfig

9 	depends on DM
18 	depends on ARCH_ASPEED
24 	depends on ARCH_ASPEED
30 	depends on ARCH_ASPEED
32 	  Support the FSI master present in the ASPEED system on chips.
36 	depends on MISC
39 	  details on the "Embedded Peripherals IP User Guide" of Altera.
43 	depends on MISC
46 	   CryptoAuthentication module found for example on the Turris Omnia
50         bool "Rockchip e-fuse support"
51 	depends on MISC
53 	  Enable (read-only) access for the e-fuse block found in Rockchip
55 	  or through child-nodes that are generated based on the e-fuse map
64 	depends on MISC
67 	  configuration bus on the Arm Versatile Express boards via
72 	depends on CROS_EC
74 	  Enable command-line access to the Chrome OS EC (Embedded
76 	  a number of sub-commands for performing EC tasks such as
84 	  microcontroller typically available on a SPI bus on Chromebooks. It
86 	  control access to the battery and main PMIC depending on the
91 	depends on CROS_EC
93 	  Enable I2C access to the Chrome OS EC. This is used on older
100 	depends on CROS_EC
102 	  Enable I2C access to the Chrome OS EC. This is used on x86
104 	  through a legacy port interface, so on x86 machines the main
109 	depends on CROS_EC && SANDBOX
112 	  keyboard (use the -l flag to enable the LCD), verified boot context,
114 	  enough to perform a Chrome OS verified boot on sandbox.
118 	depends on CROS_EC
120 	  Enable SPI access to the Chrome OS EC. This is used on newer
121 	  ARM Chromebooks such as pit, pi and nyan-big. The SPI interface
129 	  integrated 64-byte EEPROM, four programmable non-volatile I/O pins
137 	  system states.
138 	  Security Monitor can be transitioned on any security failures,
143 	depends on ARCH_JZ47XX
145 	  This selects support for the eFUSE on Ingenic JZ4780 SoCs.
151 	  Programmable memory pages that are stored on the some
160 	  in the Nuvoton Super IO chips on X86 platforms.
163 	bool "Enable power-sequencing drivers"
164 	depends on DM
166 	  Power-sequencing drivers provide support for controlling power for
172 	bool "Enable power-sequencing drivers for SPL"
173 	depends on PWRSEQ
175 	  Power-sequencing drivers provide support for controlling power for
188 	depends on PCA9551_LED
195 	depends on ARCH_STM32MP && MISC
204 	depends on (STM32 || ARCH_STM32MP) && MISC
213 	depends on TEGRA_NO_BPMP
220 	depends on TEGRA186
225 	  PMIC I2C bus, etc. This driver provides the core low-level
226 	  communication path by which feature-specific drivers (such as clock)
241 	  on X86 platforms.
250 	bool "Enable driver for generic I2C-attached EEPROMs"
251 	depends on MISC
257 	bool "Enable driver for generic I2C-attached EEPROMs for SPL"
258 	depends on MISC && SPL && SPL_DM
260 	  This option is an SPL-variant of the I2C_EEPROM option.
266 	depends on DM_I2C
273 	hex "Chip address of the EEPROM device"
299 	  Note: This is NOT the chip address length!
307 	  address and the extra bits end up in the "chip address" bit
308 	  slots. This makes a 24WC08 (1Kbyte) chip look like four 256
315 	depends on MISC
321 	depends on MISC
327 	depends on MISC
329 	  Support for serdes found on MPC83xx SoCs.
332 	bool "Enable loader driver for file system"
334 	  This is file system generic loader which can be used to load
342 	depends on MISC
350 	depends on MISC
352 	  Support IHS (Integrated Hardware Systems) FPGA, the main FPGAs on
355 	  devices, depending on the device tree entry.