Lines Matching +full:rk3128 +full:- +full:power
23 Enable old-style I2C functions for compatibility with existing code.
41 ---help---
43 often dealt with by using an I2C pass-through interface provided by
44 the EC. On some unfortunate models (e.g. Spring) the pass-through
71 configuration is given by the device tree. Kernel-style device tree
73 Binding info: doc/device-tree-bindings/i2c/i2c-gpio.txt
82 i2c-gpio driver unless your system can cope with this limitation.
83 Binding info: doc/device-tree-bindings/i2c/i2c-at91.txt
141 Only single master mode is supported and only byte-by-byte
167 both 7-bit and 10-bit addresses.
377 Rockchip parts such as RK3126, RK3128, RK3036 and RK3288. All chips
403 _ Standard-mode (up to 100 kHz)
404 _ Fast-mode (up to 400 kHz)
405 _ Fast-mode Plus (up to 1 MHz)
406 _ 7-bit and 10-bit addressing mode
407 _ Multiple 7-bit slave addresses (2 addresses, 1 with configurable mask)
408 _ All 7-bit addresses acknowledge mode
427 is used on PH1-LD4, PH1-sLD8 or older UniPhier SoCs.
430 bool "UniPhier FIFO-builtin I2C driver"
434 Support for UniPhier FIFO-builtin I2C controller driver.
435 This I2C controller is used on PH1-Pro4 or newer UniPhier SoCs.
452 bool "Enable Tegra186 BPMP-based I2C driver"
456 Power Management Processor). On Tegra186, some I2C controllers are