Lines Matching refs:SD
9 These processors can boot directly from NAND, SPI flash and SD card flash
36 The output image can be flashed on the board SPI flash or on a SD card.
38 chosen media devices (0x400 for both SPI flash or SD card).
128 Setup a SD Card for booting
131 The following example prepare a SD card with u-boot and a FAT partition
133 I will set the SD in the most compatible mode, setting it with
135 howto on line (I took as reference the preparation of a SD Card for the
138 You should start clearing the partitions table on the SD card. Because
140 that there is no partition at that address. A new SD card is already
144 You can do all steps with fdisk. If the device for the SD card is
226 9. Copy u-boot.imx on the SD card