Lines Matching full:based

23 2) Compiling U-Boot for a MXS based board
24 3) Installation of U-Boot for a MXS based board to SD card
25 4) Installation of U-Boot into NAND flash on a MX28 based board
26 5) Installation of U-Boot into SPI NOR flash on a MX28 based board
31 To make a MXS based board bootable, some tools are necessary. The only
83 2) Compiling U-Boot for a MXS based board
92 Next, configure U-Boot for a MXS based board
139 3) Installation of U-Boot for a MXS based board to SD card
142 To boot a MXS based board from SD, set the boot mode DIP switches according to
182 Last step is to insert the card into the MXS based board and boot.
188 4) Installation of U-Boot into NAND flash on a MX28 based board
191 To boot a MX28 based board from NAND, set the boot mode DIP switches according
267 5) Installation of U-Boot into SPI NOR flash on a MX28 based board