Lines Matching +full:pwm +full:- +full:gpios
2 ------------------
5 U-Boot, and may change based on Linux activity)
12 - compatible : Should be "nvidia,tegra20-dc"
17 - nvidia,panel : phandle of LCD panel information
24 - nvidia,bits-per-pixel: number of bits per pixel (depth)
25 - nvidia,pwm : pwm to use to set display contrast (see tegra20-pwm.txt)
26 - nvidia,panel-timings: 4 cells containing required timings in ms:
28 * delay between panel_vdd-rise and data-rise
29 * delay between data-rise and backlight_vdd-rise
30 * delay between backlight_vdd and pwm-rise
31 * delay between pwm-rise and backlight_en-rise
34 - nvidia,backlight-enable-gpios: backlight enable GPIO
35 - nvidia,lvds-shutdown-gpios: LVDS power shutdown GPIO
36 - nvidia,backlight-vdd-gpios: backlight power GPIO
37 - nvidia,panel-vdd-gpios: panel power GPIO
42 compatible = "nvidia,tegra20-host1x", "simple-bus";
47 #address-cells = <1>;
48 #size-cells = <1>;
54 compatible = "nvidia,tegra20-dc";
71 left-margin = <58>;
72 right-margin = <58>;
73 hsync-len = <58>;
74 lower-margin = <4>;
75 upper-margin = <4>;
76 vsync-len = <4>;
77 hsync-active-high;
78 nvidia,bits-per-pixel = <16>;
79 nvidia,pwm = <&pwm 2 0>;
80 nvidia,backlight-enable-gpios = <&gpio 28 0>; /* PD4 */
81 nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */
82 nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */
83 nvidia,panel-vdd-gpios = <&gpio 22 0>; /* PC6 */
84 nvidia,panel-timings = <400 4 203 17 15>;