device-tree-bindings/net/fsl-tsec-phy.txt

1 * TSEC-compatible ethernet nodes
5   - compatible : Should be "fsl,tsec"
6   - reg : Offset and length of the register set for the device
7   - phy-handle : See ethernet.txt file in the same directory.
8   - phy-connection-type : See ethernet.txt file in the same directory. This
9     property is only really needed if the connection is of type "rgmii-id",
10     "rgmii-rxid" and "rgmii-txid" as all other connection types are detected
17 		phy-handle = <&phy0>;
18 		phy-connection-type = "sgmii";
30   - compatible : Should define the compatible device type for the
31     mdio. Currently supported string/device is "fsl,tsec-mdio".
32   - reg : Offset and length of the register set for the device
37 		compatible = "fsl,tsec-mdio";
40 		ethernet-phy@0 {
52 with other PHYs on the bus.  The TBI PHYs are referred to by a "tbi-handle"
53 property under the tsec node, which has a similar meaning of "phy-handle".
57 		phy-handle = <&tbi1>;
61 		tbi1: tbi-phy@1f {