device-tree-bindings/gpu/nvidia%2Ctegra20-host1x.txt

12 - clocks: Must contain one entry, for the module clock.
13   See ../clocks/clock-bindings.txt for details.
14 - resets: Must contain an entry for each entry in reset-names.
15   See ../reset/reset.txt for details.
28   - clocks: Must contain one entry, for the module clock.
29     See ../clocks/clock-bindings.txt for details.
30   - resets: Must contain an entry for each entry in reset-names.
31     See ../reset/reset.txt for details.
41   - clocks: Must contain one entry, for the module clock.
42     See ../clocks/clock-bindings.txt for details.
43   - resets: Must contain an entry for each entry in reset-names.
44     See ../reset/reset.txt for details.
54   - clocks: Must contain one entry, for the module clock.
55     See ../clocks/clock-bindings.txt for details.
56   - resets: Must contain an entry for each entry in reset-names.
57     See ../reset/reset.txt for details.
67   - clocks: Must contain one entry, for the module clock.
68     See ../clocks/clock-bindings.txt for details.
69   - resets: Must contain an entry for each entry in reset-names.
70     See ../reset/reset.txt for details.
80   - clocks: Must contain one entry, for the module clock.
81     See ../clocks/clock-bindings.txt for details.
82   - resets: Must contain an entry for each entry in reset-names.
83     See ../reset/reset.txt for details.
92   - clocks: Must contain an entry for each entry in clock-names.
93     See ../clocks/clock-bindings.txt for details.
99   - resets: Must contain an entry for each entry in reset-names.
100     See ../reset/reset.txt for details.
111   - clocks: Must contain an entry for each entry in clock-names.
112     See ../clocks/clock-bindings.txt for details.
117   - resets: Must contain an entry for each entry in reset-names.
118     See ../reset/reset.txt for details.
128   - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
129   - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
139   - hdmi-supply: supply for the +5V HDMI connector pin
140   - vdd-supply: regulator for supply voltage
141   - pll-supply: regulator for PLL
142   - clocks: Must contain an entry for each entry in clock-names.
143     See ../clocks/clock-bindings.txt for details.
148   - resets: Must contain an entry for each entry in reset-names.
149     See ../reset/reset.txt for details.
154   - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
155   - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
165   - clocks: Must contain one entry, for the module clock.
166     See ../clocks/clock-bindings.txt for details.
173   - clocks: Must contain an entry for each entry in clock-names.
174     See ../clocks/clock-bindings.txt for details.
180   - resets: Must contain an entry for each entry in reset-names.
181     See ../reset/reset.txt for details.
190   - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
191   - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
201   - clocks: Must contain an entry for each entry in clock-names.
202     See ../clocks/clock-bindings.txt for details.
204     - sor: clock input for the SOR hardware
205     - parent: input for the pixel clock
206     - dp: reference clock for the SOR clock
207     - safe: safe reference for the SOR clock during power up
208   - resets: Must contain an entry for each entry in reset-names.
209     See ../reset/reset.txt for details.
214   - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
215   - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
226   - clocks: Must contain an entry for each entry in clock-names.
227     See ../clocks/clock-bindings.txt for details.
229     - dpaux: clock input for the DPAUX hardware
231   - resets: Must contain an entry for each entry in reset-names.
232     See ../reset/reset.txt for details.