Lines Matching +full:0 +full:x60000

11 U-Boot# mmc dev 0
13 U-Boot# fatload mmc 0 0x82000000 MLO
16 U-Boot# fatload mmc 0 0x83000000 u-boot.img
23 U-Boot# sf probe 0
25 U-Boot# sf erase 0 0x10000
26 SF: 65536 bytes @ 0x0 Erased: OK
27 U-Boot# sf erase 0x20000 0x10000
28 SF: 65536 bytes @ 0x20000 Erased: OK
29 U-Boot# sf erase 0x30000 0x10000
30 SF: 65536 bytes @ 0x30000 Erased: OK
31 U-Boot# sf erase 0x40000 0x10000
32 SF: 65536 bytes @ 0x40000 Erased: OK
33 U-Boot# sf erase 0x50000 0x10000
34 SF: 65536 bytes @ 0x50000 Erased: OK
35 U-Boot# sf erase 0x60000 0x10000
36 SF: 65536 bytes @ 0x60000 Erased: OK
37 U-Boot# sf write 82000000 0 0x10000
38 SF: 65536 bytes @ 0x0 Written: OK
39 U-Boot# sf write 83000000 0x20000 0x60000
40 SF: 393216 bytes @ 0x20000 Written: OK
42 For #2, set sysboot to QSPI-1 boot mode(SYSBOOT[5:0] = 100110) and power
43 on. ROM should find the GP header at offset 0 and load/execute SPL. SPL
45 find a U-Boot image header at offset 0x20000 (set in the config file)