Lines Matching +full:push +full:- +full:button

1 -------------------------------------------------
2    Simple steps used to test the SH-QSPI at U-Boot
3 -------------------------------------------------
5 #0, Currently, SH-QSPI is used by lager board (Renesas ARM SoC R8A7790)
7     basically. Thus, U-Boot start, SH-QSPI will is operating normally.
9 #1, build U-Boot and load u-boot.bin
11   => tftpboot 40000000 u-boot.bin
16   Filename 'u-boot.bin'.
23 #2, Commands to erase/write u-boot to flash device
36 #3, Push reset button.
38   If you're written correctly and driver works properly, U-Boot starts.