Lines Matching full:adapter

64 CONFIG_USB_HOST_ETHER	enables USB ethernet adapter support
70 If you have a supported USB Ethernet adapter you can use it in U-Boot
74 client. In that case your board is pretending to be an Ethernet adapter
79 Ethernet adapter to which it is directly connected and the connection to
80 the outside world is your adapter's Ethernet cable. Your board becomes an
99 supported device list, so we know this adapter is supported.
103 If your adapter is not listed there is a still a chance that it will
104 work. Try looking up the manufacturer of the chip inside your adapter.
105 or take the adapter apart and look for chip markings. Then add a line
108 between the chip in your adapter and the driver. You could try to get a
132 and one or more of the following for individual adapter hardware:
170 The 'usb start' command should identify the adapter something like this: